Instrukcja obsługi Canon ZR800


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Canon ZR800 (66 stron) w kategorii kamera wideo. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/66
English
PUB.DIM-788
NTSC
English
Français
Español
Digital Video Camcorder
Instruction Manual
Caméscope Numérique
Manuel d’instruction
Videocámara digital
Manual de Instrucciones
Mini Digital
Video
Cassette
2
Intr oduction
Cleaning the Video Heads
Digital video camcorders record video signals on the tape in very thin lines (as thin as
1/8 of the width of a hair). The following symptoms may appear if the video heads
become dirty even a little.
Mosaic or other blocky video artifacts (Fig. 1) or banding
(Fig. 2) appear on the picture during playback.
Sound becomes distorted, or there is no sound during
playback.
The message “HEADS DIRTY, USE CLEANING CASSETTE”
appears.
If such symptoms appear, clean the video heads with the Canon
DVM-CL Digital Video Head Cleaning Cassette* or a
commercially available dry cleaning cassette.
If the symptoms reappear shortly after the cleaning, the
videocassette may be defective. Stop using it.
* Availability differs from area to area.
Video heads may become dirty under the following conditions:
When using the camcorder in humid or hot places.
When using cassettes with damaged or dirty tape.
When using the camcorder in dusty places.
When using the video heads without cleaning them for a long time.
NOTES
Before you make important recordings, clean the video heads and make a test recording first. We
also recommend cleaning the video heads after use, before storing the camcorder.
Do not use wet type cleaning cassettes as this may damage the camcorder.
Even after cleaning the video heads you may not be able to play back correctly tapes that were
recorded with dirty video heads.
Fig. 1
Fig. 2
Introduction
3
Important Usage Instructions
WARNING!
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
For Canada only:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO DRIPPING OR SPLASHING.
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING
INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
COPYRIGHT WARNING:
Unauthorized recording of copyrighted materials may infringe on the rights of
copyright owners and be contrary to copyright laws.
Digital Video Camcorder, ZR800 A systems
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and use in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
If such changes or modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
I
mpor
t
an
t
W
arn
i
ng
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure, that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point, within an equilateral
triangle, is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.


Specyfikacje produktu

Marka: Canon
Kategoria: kamera wideo
Model: ZR800

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Canon ZR800, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kamera wideo Canon

Canon

Canon VIXIA HV20 Instrukcja

12 Października 2024
Canon

Canon ML-105 EF Instrukcja

29 Września 2024
Canon

Canon CT-V1 Instrukcja

28 Września 2024
Canon

Canon 310XL Instrukcja

16 Września 2024
Canon

Canon Scoopic 16M Instrukcja

14 Września 2024
Canon

Canon et 8 Instrukcja

14 Września 2024
Canon

Canon Zoom 84C Instrukcja

13 Września 2024
Canon

Canon Optura 300 Instrukcja

13 Września 2024

Instrukcje kamera wideo

Najnowsze instrukcje dla kamera wideo

Denver

Denver ACT-5002 Instrukcja

14 Października 2024
Samsung

Samsung SMX-F530RN Instrukcja

12 Października 2024
Sony

Sony HDC-2400 Instrukcja

12 Października 2024
Sony

Sony PMW-350K Instrukcja

12 Października 2024
Trust

Trust Powerc@m DV-2400V Instrukcja

11 Października 2024
JVC

JVC GY-HM700CHU Instrukcja

10 Października 2024
Teslong

Teslong TS43 Instrukcja

9 Października 2024
Kogan

Kogan KADS4060AACA Instrukcja

9 Października 2024
Hazet

Hazet 4812-24/4AF Instrukcja

9 Października 2024
Nedis

Nedis MCAM2424BK Instrukcja

8 Października 2024