Instrukcja obsługi Canon XL2

Canon kamera wideo XL2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Canon XL2 (126 stron) w kategorii kamera wideo. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/126

PUB. DIM-692

DIGITAL VIDEO CAMCORDER

Instruction Manual

CAMESCOPE NUMÉRIQUE

Manuel d’instruction

VIDEOCÁMARA DIGITAL

Manual de Instrucciones

MiMini

nini D

DDigital

igital

igitaligital

Video

VideoVideo

Cassette

CassetteCassette

English

Françai

Español

NTSCA

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR

MOISTURE.

Digital Video Camcorder, XL2A Systems.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and use in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual.

If such changes or modifications should be made, you could be required to stop operation of the equipment.

Canon U.S.A. Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

Tel No. (516)328-5600

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE

RECOMMENDED ACCESSORIES ONLY.

Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and

be contrary to copyright laws.

Important Warning

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within

the product’s enclosure, that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point, within an equilateral triangle,

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

product.

CAUTION

RISK OF ELECT RIC SHOCK

DO NOT OPEN

Important Usage Instructions

Introduction

In these safety instructions the word “product” refers to

the Canon Digital Video Camcorder XL2A and all its

accessories.

1. Read Instructions — All the safety and operating

instructions should be read before the product is

operated.

2. Retain Instructions — The safety and operating

instructions should be retained for future reference.

3. Heed Warnings — All warnings on the product and in

the operating instructions should be adhered to.

4. Follow Instructions — All operating and maintenance

instructions should be followed.

5. Cleaning — Unplug this product from the wall outlet

before cleaning. Do not use liquid or aerosol cleaners.

The product should be cleaned only as recommended

in this manual.

6. Accessories — Do not use accessories not

recommended in this manual as they may be

hazardous.

7. Avoid magnetic or electric fields — Do not use the

camera close to TV transmitters, portable

communication devices or other sources of electric or

magnetic radiation. They may cause picture

interference, or permanently damage the camera.

8. Water and Moisture — Hazard of electric shock — Do

not use this product near water or in rainy/moist

situations.

9. Placing or Moving — Do not place on an unstable cart,

stand, tripod, bracket or table. The product may fall,

causing serious injury to a child or adult, and serious

damage to the product.

A product and cart combination should

be moved with care. Quick stops,

excessive force, and uneven surfaces may

cause the product and cart combination

to overturn.

10. Power Sources — The CA-920 Compact Power

Adapter should be operated only from the type of

power source indicated on the marking label. If you are

not sure of the type of power supply to your home,

consult your product dealer or local power company.

Regarding other power sources such as battery power,

refer to instructions in this manual.

11. Polarization — The CA-920 Compact Power Adapter is

equipped with a polarized 2-prong plug (a plug having

one blade wider than the other).

The 2-prong polarized plug will fit into the power

outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try

reversing the plug. If the plug still fails to fit, contact

your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the polarized plug.

12. Power Cord Protection — Power cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them. Pay

particular attention to plugs and the point from which

the cords exit the product.

13. Outdoor Antenna Grounding — If an outside antenna

is connected to the product, be sure the antenna is

grounded so as to provide some protection against

voltage surges and built-up static charges. Section 810

of the National Electrical Code, ANSI / NFPA No. 70—

1984, provides information with respect to proper

grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location of antenna

discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode. See

figure 1.

14. Lightning — For added protection of this product

during a lightning storm, or when it is left unattended

and unused for long periods of time, disconnect it from

the wall outlet and disconnect the antenna. This will

prevent damage to the product due to lightning and

power-line surges.

15. Power Lines — An outside antenna system should not

be located in the vicinity of overhead power lines or

other electric light or power circuits, or where it can fall

into such power lines or circuits. When installing an

outside antenna system, extreme care should be taken

to keep from touching such power lines or circuits as

contact with them might be fatal.

16. Overloading — Do not overload wall outlets and

extension cords as this can result in a risk of fire or

electric shock.

17. Objects and Liquid Entry — Never push objects of any

kind into this product through openings as they may

touch dangerous voltage points or short out parts that

could result in a fire or electric shock. Be careful not to

spill liquid of any kind onto the product.

18. Servicing — Do not attempt to service this product

yourself as opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

EXAMPLE OF ANTENNA GROUNDING AS

PER NATIONAL ELECTRICAL CODE

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE

UNIT

(NEC SECT ION

810-20)

GROUNDING CONDUCTORS

(NEC SECT ION 810-21)

GROUND CLAMPS

POWER SERVICE

GROUNDING ELECTRODE

SYSTEM

(NEC ART 250. PART H)

NEC - NAT IONAL ELECTRICAL CODE

ELECTRIC

SERVICE

EQUIPMENT

GROUND

CLAMP

Fig. 1

IMPORTANT SAFETY INSTRUCTIONS

Specyfikacje produktu

Marka:	Canon
Kategoria:	kamera wideo
Model:	XL2
Wysokość produktu:	220 mm
Szerokość produktu:	225 mm
Głębokość produktu:	496 mm
Waga produktu:	2410 g
Technologia baterii:	Litowo-jonowa (Li-Ion)
Typ ekranu:	LCD
Długość przekątnej ekranu:	2 "
Obsługiwane typy kart pamięci:	Nieobsługiwany
Rozdzielczość:	200000 px
Automatyczne ustawienie ostrości:	Tak
Rodzaj baterii:	BP-930, BP-945
Długość ogniskowa:	5.4 - 108 mm
Pictbridge:	Nie
Czas pracy na zasilaniu akumulatorowym:	3.83 h
Wbudowany mikrofon:	Tak
Inne połączenia:	Headphone\n2x Phantom Powered XLR\nAnalogue-in\nAV\nLANC
Typ przetwornika obrazu:	CMOS
Stabilizator obrazu:	Tak
Suma megapikseli:	0.8 MP
Zoom optyczny:	20 x
Wielkość filtra:	72 mm
Min. Oświetlenie:	0.8 lx
Ostrość:	Automatyczne/Ręczne
Wielkość czujnika CCD:	1/3 "
Szybkość migawki:	1/16000 - 1/6 s
System soczewki:	OIS, 5.4 - 108mm, 20x
Wejście S-Video:	Tak
Rodzaj taśmy kamery wideo:	Mini-DV
Wejście DV:	Tak
Wyjście S-Video:	Tak