Instrukcja obsługi Canon VIXIA HF R70

Canon kamera wideo VIXIA HF R70

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Canon VIXIA HF R70 (2 stron) w kategorii kamera wideo. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

5 6

HD Camcorder

Charging the Battery Pack

Charge the supplied battery pack in advance. Fully charging the

supplied battery pack will take about 7 hours and 45 minutes.

1. Plug the compact power adapter

into a power outlet and connect it

to the camcorder’s DC IN terminal.

• For Asia only: Connect the power

cord to the compact power adapter

before plugging the power cord into

the power outlet.

2. Attach the battery pack to the

camcorder.

• Press the battery pack softly into

the battery attachment unit and

slide it up until it clicks in place.

3. Charging will start when the

camcorder is turned off.

• The POWER/CHG indicator will turn on

in red (battery pack charging). When

the red POWER/CHG indicator goes

out, the battery pack is fully charged.

4. When the battery pack is fully

charged, disconnect the compact

power adapter from the camcorder

and then from the power outlet.

DC IN terminal

POWER/CHG (charge) indicator

PUB. DIE-0485-000



HD Camcorder

VIXIA HF R70 / VIXIA HF R72 / VIXIA HF R700



BP-727 Battery Pack []



CA-110 Compact Power Adapter []

(CA-110E, including power cord, in Asia)



IFC-300PCU/S USB Cable []



HTC-100/S High Speed HDMI Cable []



Transfer Utility LE Startup Guide

Package Contents

Basic Setup

The first time you turn on the camcorder, you will be guided by the camcorder’s basic

setup screens to select the camcorder’s initial settings, such as the language, date and

time, movie format, etc.

1. Turn on the camcorder.

• Open the LCD panel or press .[

2. Touch the desired language for onscreen displays and then touch [ ].æ

3. Touch the desired date/time format and then touch [ ].æ

4. Set the date and time.

• Touch a field you want to change and touch [ ] or [ ] to Í Î

change. Repeat as necessary.

• Touch [24H] to use 24-hour clock or leave untouched to use

AM/PM.

5. Touch [OK] and then touch [ ].æ

6. Touch [ ] or [ ] to select the movie format and then · ¸

touch [ ].æ

• N After you select the movie format, you need to

select the memory to be used for recording movies (step 7)

and photos (step 8).

• Q No further settings are necessary. Skip to step 9.

7. Touch [ ] (built-in memory) or [ ] (memory card) and then touch [ ].& 8 æ

8. Touch [ ] (built-in memory) or [ ] (memory card) and then touch [ ].& 8 æ

9. Touch [OK] to complete the basic setup and close the setup screen.

Inserting a Memory Card

You can use commercially available SD, SDHC and

SDXC cards with this camcorder. We recommend

using memory cards rated CLASS 4, 6 or 10. Initialize a

memory card before using it with the camcorder for the

first time ( ).; Initializing the Memory

1. Open the LCD panel.

• The camcorder will turn on and the first screen of the

basic setup will appear.

2. Press to turn off the camcorder.[

• Make sure the POWER/CHG indicator is off.

3. Open the memory card slot cover and insert the

memory card.

• Insert the memory card at a slight angle, with the label

facing toward the lens.

4. Close the memory card slot cover.

1. Turn on the camcorder and open the lens cover.

• Open the LCD panel or press and then slide [

down the lens cover switch.

2. Video: Press to start recording video. Y

Press again to stop recording.

Touch [ ] to record a photo.Photos: {

3. When you finish recording, close the lens cover and

turn off the camcorder.

Shooting Video and Taking Photos Playing Back Video and Viewing Photos

1. Press the button.^

• The [ ] index screen will open. To play back different content, change the index screen.y

[ ] [ Photo Playback] for the [ ] (photos) index screen.0> } }

[ ] [ Baby Album] for the [ ] index screen (only scenes recorded in Baby mode).0>9 9

[ ] [ Video Snapshot] for the [ ] index screen (only AVCHD video snapshot scenes).0> ¦

To change the memory or movie format*

From the index screen:

1. Touch the index screen button (next to

the (Home) button).0

2. Select the memory* ( or ) and/& 8

or movie format ( or ) of the · ¸

recordings you wish to play back and

then touch [OK].

* only.N

To delete recordings

From the index screen:

1. Touch [Edit] [Delete].>

2. Select whether to delete scenes/photos

by date/folder, selected scenes/photos,

or all scenes/photos.

• To select individual recordings: Touch all

the scenes/photos you wish to delete to

mark them with a , then touch [OK]."

3. Touch [Yes] [OK].>

2. Touch the thumbnail of the scene or photo you want to play back.

• During playback, touch the screen to display the playback controls.

Installing the Camcorder’s

Instruction Manual (PDF File)

This guide only introduces the most basic

functions of the camcorder to get you started.

To learn more about your camcorder, to read

important handling precautions and to consult

the troubleshooting section if an error message

is displayed, be sure to read the full-version

Instruction Manual (PDF file*). Access the

following Web site. Click on your country/region

and follow the onscreen instructions to download

the latest version of the PDF file.

www.canon.com/icpd/

* A PDF viewer, such as Adobe Reader, is required to open the

PDF file.

Getting Started

 

 

Index screen button

POWER/CHG

indicator is off

Top view

Memory Card

Lens

Flashes while recording

N Wi-Fi Functions

The camcorder features a number of convenient

Wi-Fi functions that will allow you to use it in

combination with Wi-Fi enabled smartphones and

tablets. For example, you can use a smartphone or

tablet to control the camcorder remotely while recording,

or to upload recordings to the Web.

You can also use the NFC function to effortlessly connect the

camcorder to an NFC-enabled Android device.

1. If necessary, install the required app on the smartphone or

tablet.

2. Select the desired Wi-Fi function on the camcorder.

3. Wirelessly connect the device to the camcorder.

Note: The necessary procedure may differ according to the Wi-Fi

function you wish to use. For details, be sure to refer to the PDF

Instruction Manual ( ).; Wi-Fi Functions

Optional Accessories

Canon offers a wide range of optional accessories for your camcorder. For

details, be sure to refer to the PDF Instruction Manual ( ;Optional

Accessories).

Use of genuine Canon accessories is recommended.

This product is designed to achieve excellent performance when used with

genuine Canon accessories. Canon shall not be liable for any damage to

this product and/or accidents such as fire, etc., caused by the malfunction

of non-genuine Canon accessories (e.g., a leakage and/or explosion of

a battery pack). Please note that this warranty does not apply to repairs

arising out of the malfunction of non-genuine Canon accessories, although

you may request such repairs on a chargeable basis.

This mark identifies genuine Canon video accessories.

When you use Canon video equipment, we recommend

Canon-brand accessories or products bearing the same

mark.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECT RIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert

the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure,

that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point, within an equilateral triangle, is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the literature

accompanying the product.

Important Safety InstructIons

In these safety instructions the word “apparatus” refers to the Canon HD Camcorder

VIXIA HF R72 / VIXIA HF R70 / VIXIA HF R700 and all its accessories.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

8 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

9 Only use attachments/accessories specified by the manufacturer.

10 Unplug this apparatus during lightning storms or when unused for long periods of

time.

11 Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

CA-110 identification plate is located on the bottom.

CAN ICES-3(B)/NMB-3(B)

Important Usage Instructions

FCC/IC NOTICE

HD Camcorder, ID0074 / ID0076 systems

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits

for class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and use in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart

B of Part 15 of FCC Rules.Do not make any changes or modifications to

the equipment unless otherwise specified in the manual. If such changes

or modifications should be made, you could be required to stop operation

of the equipment.

Model ID0074 (including WLAN Module Model WM217, FCC

ID: AZD217)

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may

not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.

This transmitter must not be co-located or operated in conjunction with

any other antenna or transmitter.

The available scientific evidence does not show that any health problems

are associated with using low-power wireless devices. There is no proof,

however, that these low power wireless devices are absolutely safe. Low-

power wireless devices emit low levels of radio frequency energy (RF) in the

microwave range while being used. Whereas high levels of RF can produce

health effects (by heating tissue), exposure to low-level RF that does not

produce heating effects causes no known adverse health effects. Many

studies of low-level RF exposures have not found any biological effects.

Some studies have suggested that some biological effects might occur, but

such findings have not been confirmed by additional research. This model

has been tested and found to comply with FCC/IC radiation exposure limits

set forth for an uncontrolled equipment and meets the FCC radio frequency

(RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF)

Exposure rules.

Canon U.S.A., Inc.

One Canon Park, Melville, NY 11747, USA

Tel No. 1-800-OK-CANON (1-800-652-2666)

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS PRODUCT TO RAIN OR MOISTURE.

To reduce the risk of electric shock, do not place objects filled with liquids,

such as vases, on the apparatus.

The Mains plug is used as the disconnect device. The Mains plug shall

remain readily operable to disconnect the plug in case of an accident.

While using the compact power adapter, do not wrap it or cover it with a

piece of cloth, and do not place it in confined narrow spaces.

Precautions About the Battery Pack

DANGER!

Treat the battery pack with care.

• Keep it away from fire (or it might explode).

• Do not expose the battery pack to temperature higher than 60 ºC (140 ºF).

Do not leave it near a heater or inside a car in hot weather.

• Do not try to disassemble or modify it.

• Do not drop it or subject it to shocks.

• Do not get it wet.

Important Note About Accessing the Memory

• Observe the following precautions while the ACCESS indicator is on or

flashing. Failing to do so may result in permanent data loss or damage to

the memory.

– Do not open the memory card slot cover.

– Do not disconnect the power source or turn off the camcorder.

– Do not change the camcorder’s shooting mode.

– Do not press the button.^

– When a USB cable is connected to the camcorder, do not disconnect

the USB cable.

REGIONS OF USE

The VIXIA HF R72 and VIXIA HF R70 are in compliance (as of January 2016)

with the radio signal regulations of the regions listed below. For details on other

regions where it can be used, make inquiries with the contacts listed inside the

blue frame at the bottom of this page.

REGIONS

Canada, Hong Kong S.A.R., USA

Model

ID0074: VIXIA HF R70 / VIXIA HF R72

Trademark Acknowledgements

• SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.

• HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.

• Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby

Laboratories.

• Wi-Fi is a registered trademark of the Wi-Fi Alliance.

• Wi-Fi Certified, WPA, WPA2, and the Wi-Fi Certified logo

are trademarks of the Wi-Fi Alliance.

• The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in

the United States and in other countries.

• Other names and products not mentioned above may be trademarks or

registered trademarks of their respective companies.

• This device incorporates exFAT technology licensed from Microsoft.

• “Full HD 1080” refers to Canon camcorders compliant

with high-definition video composed of 1,080 vertical

pixels (scanning lines).

• This product is licensed under AT&T patents for the

MPEG-4 standard and may be used for encoding MPEG-4 compliant

video and/or decoding MPEG-4 compliant video that was encoded only

(1) for a personal and non-commercial purpose or (2) by a video provider

licensed under the AT&T patents to provide MPEG-4 compliant video. No

license is granted or implied for any other use for MPEG-4 standard.

To display the camcorder’s certification logos

Touch [ ] [Other Settings] [Certification Logo Display].0> > q >

Q This product is not guaranteed to fully support functions of

FlashAir cards (including wireless transfer). In case of any card related

issues, please check with the card manufacturer. Also note that approval

is required to use FlashAir cards in many countries or regions. Without

approval, the use of FlashAir cards is not permitted. If it is unclear

whether your card is approved for use in your area, please check with the

card manufacturer. Availability of FlashAir cards also varies by region.

Unauthorized recording of copyrighted materials may infringe on the

rights of copyright owners and be contrary to copyright laws.

USA and Canada only:

The Lithium ion/polymer battery that powers the product is

recyclable. Please call 1-800-8-BATTERY for information on

how to recycle this battery.

The information in this guide is verified as of January 2016. Specifications and outer appearance are subject to change without previous notice.

ASIA

CANON HONGKONG COMPANY LTD.

19/F, The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon,

Hong Kong

Tel: +852 3191 2333, Fax: +852 2428 3963

CANADA

CANON CANADA INC.

6390 Dixie Road, Mississauga, ON L5T 1P7

v If you have any questions, call the Canon Canada Information Center toll

free (in Canada only) at 1-800-OK-CANON (1-800-652-2666).

v Si vous avez des questions, veuillez téléphoner 1-800-OK-CANON

(1-800-652-2666, sans frais au Canada seulement).

CENTRO Y SURAMÉRICA

CANON LATIN AMERICA, INC.

One Canon Park, Melville, NY 11747 USA

MÉXICO

CANON MEXICANA, S DE RL DE CV

Blvd. Manuel Ávila Camacho No. 138, Piso 17, Col. Lomas de Chapultepec,

C.P. 11000 México, D.F., México

CANON U.S.A., INC. NEW JERSEY OFFICE

100 Jamesburg Road, Jamesburg, NJ 08831 USA

USA

CANON U.S.A., INC. NEW JERSEY OFFICE

100 Jamesburg Road, Jamesburg, NJ 08831 USA

CANON U.S.A., INC. CHICAGO OFFICE

100 Park Blvd., Itasca, IL 60143 USA

CANON U.S.A., INC. LOS ANGELES OFFICE

15955 Alton Parkway, Irvine, CA 92618 USA

CANON U.S.A., INC. HONOLULU OFFICE

210 Ward Avenue, Suite 200, Honolulu, Hl 96814 USA

v If you have any questions, call the Canon U.S.A. Information Center toll-

free at 1-800-828-4040 (USA only).

Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

Specyfikacje produktu

Marka:	Canon
Kategoria:	kamera wideo
Model:	VIXIA HF R70

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Canon VIXIA HF R70, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje kamera wideo Canon

Canon VIXIA HV20 Instrukcja

12 Października 2024

Canon ML-105 EF Instrukcja

29 Września 2024

Canon CT-V1 Instrukcja

28 Września 2024

Canon 310XL Instrukcja

16 Września 2024

Canon Scoopic 16M Instrukcja

14 Września 2024

Canon et 8 Instrukcja

14 Września 2024

Canon Zoom 84C Instrukcja

13 Września 2024

Canon 8EE Motor Zoom Instrukcja

13 Września 2024

Canon Reflex Zoom 8-2 Instrukcja

13 Września 2024

Canon Optura 300 Instrukcja

13 Września 2024

Instrukcje kamera wideo

Najnowsze instrukcje dla kamera wideo

Denver ACT-5002 Instrukcja

14 Października 2024

Samsung SMX-F530RN Instrukcja

12 Października 2024

Sony HDC-2400 Instrukcja

12 Października 2024

Sony PMW-350K Instrukcja

12 Października 2024

Trust Powerc@m DV-2400V Instrukcja

11 Października 2024

JVC GY-HM700CHU Instrukcja

10 Października 2024

Teslong TS43 Instrukcja

9 Października 2024

Kogan KADS4060AACA Instrukcja

9 Października 2024

Hazet 4812-24/4AF Instrukcja

9 Października 2024

Nedis MCAM2424BK Instrukcja

8 Października 2024