Instrukcja obsługi Canon PowerShot A3300 IS

Canon aparat fotograficzny PowerShot A3300 IS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Canon PowerShot A3300 IS (201 stron) w kategorii aparat fotograficzny. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/201

Camera User Guide

ENGLISH

• Make sure you read this guide, including the “Safety

Precautions” section, before using the camera.

• Reading this guide will help you learn to use the camera

properly.

• Store this guide safely so that you can use it in the future.

Check if the following items are included in your camera package.

If anything is missing, contact the retailer where you purchased the camera.

Using the Manuals

Also refer to the manuals on DIGITAL CAMERA Manuals Disk.

•Camera User Guide (This Guide)

Once you have mastered the basics, use the camera’s many

features to shoot more challenging photos.

•Software Guide

Read when you want to use the included software.

•A memory card is not included.

•Adobe Reader is required to view the PDF manuals. Microsoft Word/

Word Viewer can be installed to view the Word manuals (required only for

manuals for the Middle East).

Checking the Package Contents

Camera Battery Pack NB-8L

(with Terminal Cover)

Battery Charger

CB-2LA/CB-2LAE

Wrist Strap

WS-800

Interface Cable

IFC-400PCU

AV Cable

AVC-DC400

AV Cable

AVC-DC300

Warranty

System Booklet

Getting Started

DIGITAL CAMERA

Solution Disk

Test Shots and Disclaimer

Take some initial test shots and play them back to make sure the images

were recorded correctly. Please note that Canon Inc., its subsidiaries and

affiliates, and its distributors are not liable for any consequential damages

arising from any malfunction of a camera or accessory, including memory

cards, that results in the failure of an image to be recorded or to be recorded

in a way that is machine readable.

Warning Against Copyright Infringement

The images recorded with this camera are intended for personal use. Do not

record images that infringe upon copyright laws without the prior permission

of the copyright holder. Please be advised that in certain cases the copying

of images from performances, exhibitions, or commercial properties by

means of a camera or other device may contravene copyright or other legal

rights even if the image was shot for personal use.

Warranty Limitations

For information on your camera's warranty, please refer to the Canon

Warranty System Booklet supplied with your camera. For Canon Customer

Support contacts, please see the Warranty System Booklet.

LCD Monitor (Screen)

•The LCD monitor is produced with extremely high-precision manufacturing

techniques. More than 99.99% of the pixels operate to specification, but

occasionally non-performing pixels may appear as bright or dark dots. This

is not a malfunction and has no effect on the recorded image.

•The LCD monitor may be covered with a thin plastic film for protection

against scratches during shipment. If so, remove the film before using the

camera.

Camera Body Temperature

Please take care when operating the camera for an extended period as the

camera body may become warm. This is not a malfunction.

Read This First

What Do You Want to Do?

zShoot, leaving it to the camera to make settings .........................24

zJust take pictures (Easy mode)....................................................29

I w P

At the beach

(p. 69)

Against snow

(p. 70)

Kids and pets

(p. 69)

Portraits

(p. 68)

Take good people shots

Landscape

(p. 69)

Foliage

(p. 69)

Shoot various other scenes

Fireworks

(p. 70)

Shoot with special effects

Low Light

(p. 69)

Miniature Effect

(p. 74)

Toy Camera Effect

(p. 75)

Fish-eye Effect

(p. 73)

Super vivid colors

(p. 73)

Poster Effect

(p. 73)

Monochrome

(p. 76)

Shoot

zShoot in Discreet mode................................................................72

zAdjust image settings when shooting (Live View Control) ...........71

Focus on faces

.................................................................. , , 24 68 98

zShoot in places where I cannot use the flash

(turn off the flash) .........................................................................56

zTake pictures with me in them too (self-timer) .................60 62 80, ,

zInsert the date and time into my shots .........................................59

What Do You Want to Do?

zLook at my pictures ......................................................................27

zEasy playback (Easy Mode).........................................................29

zAutomatically play back pictures (slideshow).............................116

zLook at my pictures on a TV ......................................................120

zLook at my pictures on a computer. .............................................34

zQuickly search pictures ......................................................114 115,

zErase pictures ...................................................................... , 28 125

View

zShoot movies ...............................................................................30

zView movies .................................................................................32

Shoot/View Movies

zEasily print pictures ....................................................................138

zSave images to a computer .........................................................34

Save

zTurn off sounds ............................................................................50

zUse the camera abroad........................................................ , 39 155

zUnderstand what is displayed on the screen .............................171

Other

Chapters 1 – 3 explain the basic operations and frequently used functions of

this camera. Chapters 4 onward explain the advanced functions, letting you

learn more as you read each chapter.

Checking the Package Contents .......2

Read This First ..................................3

What Do You Want to Do? ................4

Table of Contents ..............................6

Conventions Used in This Guide .......9

Safety Precautions...........................10

Charging the Battery........................14

Compatible Memory Cards

(Sold Separately)...........................16

Inserting the Battery and Memory

Card...............................................16

Setting the Date and Time...............19

Setting the Display Language..........21

Formatting Memory Cards ...............22

Pressing the Shutter Button.............23

Taking Pictures (Smart Auto)...........24

Viewing Images ...............................27

Erasing Images................................28

Shooting or Viewing Images in

Easy Mode.....................................29

Shooting Movies ..............................30

Viewing Movies................................32

Transferring Images to a Computer

for Viewing.....................................34

Accessories .....................................38

Separately Sold Accessories...........39

Components Guide..........................42

Screen Display.................................46

Indicator ...........................................47

FUNC. Menu – Basic Operations ....48

MENU – Basic Operations .............. 49

Changing the Sound Settings ......... 50

Adjusting the Screen Brightness ..... 52

Returning the Camera to Default

Settings ......................................... 53

Power Saving Function

(Auto Power Down)....................... 54

Clock Functions............................... 54

Turning the Flash Off ...................... 56

Zooming in More Closely on

Subjects (Digital Zoom)................. 57

Inserting the Date and Time............ 59

Using the Self-Timer ....................... 60

Changing the Recording Pixel

Setting (Image Size) ..................... 63

Changing the Compression

Ratio (Image Quality) .................... 63

Shooting in Various Conditions ....... 68

Easily Changing the Brightness and

Color When Shooting

(Live View Control)........................ 71

Shooting in Discreet Mode.............. 72

Adding Effects and Shooting

(Creative Filters) ........................... 72

Detecting a Face and Shooting

(Smart Shutter) ............................. 77

Shooting Long Exposures............... 81

Table of Contents

1 Getting Started.................. 13

2 Learning More ................... 41

3 Shooting with Commonly

Used Functions .................55

4 Adding Effects and Shooting

in Various Conditions .......67

Table of Contents

Shooting in Program AE ................. 84

Adjusting the Brightness

(Exposure Compensation) ............ 85

Turning the Flash On ...................... 85

Adjusting the White Balance ........... 86

Changing the ISO Speed................ 87

Correcting the Brightness and

Shooting (i-Contrast)..................... 88

Continuous Shooting....................... 89

Changing the Tone of an Image

(My Colors) ................................... 90

Shooting Close-ups (Macro) ........... 91

Shooting Far Away Subjects

(Infinity) ......................................... 91

Changing the AF Frame Mode........ 92

Choosing the Subject to Focus On

(Tracking AF) ................................ 94

Magnifying the Focal Point.............. 95

Shooting with the AF Lock .............. 96

Shooting with Servo AF .................. 97

Choosing the Person to Focus On

(Face Select) ................................ 98

Changing the Metering Method....... 99

Shooting with the AE Lock............ 100

Shooting with the FE Lock ............ 100

Shooting with Slow Synchro ......... 101

Red-Eye Correction ...................... 102

Checking for Shut Eyes ................ 103

Shooting Using a TV as

the Display .................................. 103

Changing the Movie Mode............ 106

Shoot Movies That Look Like a

Miniature Model

(Miniature Effect) ......................... 106

Changing the Image Quality.......... 108

AE Lock/Exposure Shift................. 109

Other Shooting Functions.............. 110

Editing ........................................... 111

Quickly Searching Images............. 114

Searching for Images Using the

Jump Display............................... 115

Viewing Slideshows.......................116

Checking the Focus....................... 117

Magnifying Images ........................ 118

Displaying Various Images

(Smart Shuffle) ............................ 119

Changing Image Transitions .........120

Viewing Images on a TV ...............120

Protecting Images ......................... 122

Erasing All Images ........................125

Tagging Images as Favorites ........127

Organizing Images by Category

(My Category) ............................. 128

Rotating Images ............................ 130

Resizing Images............................131

Trimming ....................................... 132

Correcting the Brightness

(i-Contrast) .................................. 134

Correcting the Red-Eye Effect....... 135

Printing Images ............................. 138

Choosing Images for Printing

(DPOF)........................................ 145

5 Choosing Settings

Yourself..............................83

6 Using Various Functions for

Shooting Movies .............105

7 Using Various Playback and

Editing Functions ........... 113

8 Printing............................ 137

Table of Contents

Changing Camera Settings............150

Changing Shooting Function

Settings........................................157

Changing Playback Function

Settings........................................161

Using Household Power ................164

Troubleshooting.............................165

List of Messages That Appear

on the Screen.............................. 169

Information Displayed

on the Screen.............................. 171

Handling Precautions .................... 175

Functions Available in Each

Shooting Mode............................ 176

Menus ........................................... 184

Specifications ................................ 194

Index ............................................. 198

9 Customizing Camera

Settings............................ 149

10 Useful Information .......... 163

•Icons are used in the text to represent the camera buttons and dials.

•Language that displays on the screen appears inside [ ] (square brackets).

•The directional buttons and FUNC./SET button are represented by the

following icons.

•: Things you should be careful about

•: Troubleshooting tips

•: Hints for getting more out of your camera

•: Supplemental information

•(p. xx): Reference pages (“xx” stands for a page number)

•This guide assumes all functions are at their default settings.

•The various types of memory cards that can be used in this camera are

collectively referred to as memory cards in this guide.

•Functions that differ depending on the camera model are indicated with the

following icons:

Functions and precautions for the PowerShot A3300 and

A3350 IS only.

Functions and precautions for the PowerShot A3200 IS only.

Functions and precautions for the PowerShot A2200 only.

Explanations without these icons apply to all three models.

•PowerShot A3300 IS screenshots and illustrations are used for the

explanations in this guide.

Conventions Used in This Guide

Right button

FUNC./SET buttonUp button

Left button

Down button

•Before using the product, please ensure that you read the safety precautions described

below. Always ensure that the product is used correctly.

•The safety precautions noted on the following pages are intended to prevent injuries to

yourself and other persons, or damage to the equipment.

•Be sure to also check the guides included with any separately sold accessories you

use.

Warning Denotes the possibility of serious injury or death.

•Do not trigger the flash in close proximity to people’s eyes.

Exposure to the intense light produced by the flash could damage eyesight. In particular,

remain at least one meter (39 inches) away from infants when using the flash.

•Store this equipment out of the reach of children and infants.

Strap: Putting the strap around a child’s neck could result in asphyxiation.

•Use only recommended power sources.

•Do not attempt to disassemble, alter or apply heat to the product.

•Avoid dropping or subjecting the product to severe impacts.

•To avoid the risk of injury, do not touch the interior of the product if it has been

dropped or otherwise damaged.

•Stop using the product immediately if it emits smoke, a strange smell, or

otherwise behaves abnormally.

•Do not use organic solvents such as alcohol, benzine, or thinner to clean the

equipment.

•Do not let the product come into contact with water (e.g. sea water) or other

liquids.

•Do not allow liquids or foreign objects to enter the camera.

This could result in electrical shock or fire.

If liquids or foreign objects come into contact with the camera interior, immediately turn

the camera power off and remove the battery.

If the battery charger becomes wet, unplug it from the outlet and consult your camera

distributor or a Canon Customer Support Help Desk.

•Use only the recommended battery.

•Do not place the battery near or in direct flame.

•Unplug the power cord periodically, and using a dry cloth, wipe away any dust

and dirt that has collected on the plug, the exterior of the power outlet, and the

surrounding area.

•Do not handle the power cord with wet hands.

•Do not use the equipment in a manner that exceeds the rated capacity of the

electrical outlet or wiring accessories. Do not use if the power cord or plug are

damaged, or not fully plugged into the outlet.

•Do not allow dirt or metal objects (such as pins or keys) to contact the terminals

or plug.

The battery may explode or leak, resulting in electrical shock or fire. This could cause

injury and damage the surroundings. In the event that a battery leaks and the battery acid

contacts eyes, mouth, skin or clothing, immediately flush with water.

Safety Precautions

•Turn the camera off in places where camera use is prohibited.

The electromagnetic waves emitted by the camera may interfere with the operation of

electronic instruments and other devices. Exercise adequate caution when using the

camera in places where use of electronic devices is restricted, such as inside airplanes

and medical facilities.

•Do not play the supplied CD-ROM(s) in any CD player that does not support data

CD-ROMs.

It is possible to suffer hearing loss from listening with headphones to the loud sounds of

a CD-ROM played on a music CD player. Additionally, playing the CD-ROM(s) in an audio

CD player (music player) could damage the speakers.

Caution Denotes the possibility of injury.

•Be careful not to bang the camera or subject it to strong impacts or shocks when

hanging it by the strap.

•Be careful not to bump or push strongly on the lens.

This could lead to injury or damage the camera.

•When using the flash, be careful not to cover it with your fingers or clothing.

This could result in burns or damage to the flash.

•Avoid using, placing or storing the product in the following places:

- Places subject to strong sunlight

- Places subject to temperatures above 40 °C (104 °F)

- Humid or dusty areas

These could cause leakage, overheating or an explosion of the battery, resulting in

electrical shock, fire, burns or other injuries.

•The slideshow transition effects may cause discomfort when viewed for

prolonged periods.

Caution Denotes the possibility of damage to the equipment.

•Do not aim the camera at bright light sources (such as the sun on a clear day).

Doing so may damage the image sensor.

•When using the camera on a beach or at a windy location, be careful not to allow

dust or sand to enter the camera.

This may cause the product to malfunction.

•In regular use, small amounts of smoke may be emitted from the flash.

This is due to the high intensity of the flash burning dust and foreign materials stuck to the

front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from

the flash to prevent heat build-up and damage to the unit.

Safety Precautions

•Remove and store the battery when you are not using the camera.

If the battery is left inside the camera, damage caused by leakage may occur.

•Before you discard the battery, cover the terminals with tape or other insulators.

Contacting other metal materials may lead to fire or explosions.

•Unplug the battery charger from the power outlet after charging is complete, or

when you are not using it.

•Do not place anything, such as cloth on top of the battery charger while it is

charging.

Leaving the unit plugged in for a long period of time may cause it to overheat and distort,

resulting in fire.

•Do not place the battery near pets.

Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or

damage.

•Do not sit down with the camera in your pocket.

Doing so may cause malfunctions or damage the screen.

•When putting the camera in your bag, ensure that hard objects do not come into

contact with the screen.

•Do not attach any hard objects to the camera.

Doing so may cause malfunctions or damage the screen.

Getting Started

This chapter explains preparations before shooting, how to shoot in

A mode, and then how to view and erase the images you take. The

latter part of this chapter explains how to shoot and view images in

Easy mode, how to shoot and view movies, and how to transfer images

to a computer.

Attaching the Strap/Holding the Camera

•Attach the included strap and wrap it around your wrist to avoid dropping

the camera during use.

•Keep your arms tight against your body while holding the camera firmly by

the sides when shooting. Be sure that your fingers do not block the flash.

Strap

Use the included charger to charge the battery. Be sure to charge the battery

as it is not charged at the time of purchase.

Remove the cover.

Insert the battery.

zAlign the o marks on the battery and

charger, then insert the battery by sliding it

in ( ) and down ( ).

Charge the battery.

zFor CB-2LA: Flip out the plug ( ) and

plug the charger into a power outlet ( ).

zFor CB-2LAE: Plug the power cord into

the charger, then plug the other end into a

power outlet.

XThe charge lamp lights orange and

charging starts.

XThe charge lamp will light green when

charging has finished. Charging takes

approx. 1 hour and 30 minutes.

Remove the battery.

zUnplug the battery charger from the power

outlet, then remove the battery by sliding it

in ( ) and up ( ).

Charging the Battery

CB-2LA

CB-2LAE

To protect the battery and prolong its life, do not charge it for longer than

24 hours continuously.

Charging the Battery

Number of Possible Shots

• The number of shots that can be taken is based on the Camera & Imaging Products

Association (CIPA) measurement standard.

• Under some shooting conditions, the number of shots that can be taken may be less

than mentioned above.

Battery Charge Indicator

An icon or message will appear on the screen indicating the battery’s charge

state.

Number of Shots Approx. 230 Approx. 250 Approx. 280

Playback Time Approx. 5 hours Approx. 6 hours Approx. 6 hours

Display Summary

Sufficient charge.

Slightly depleted, but sufficient.

(Blinking red) Nearly depleted. Charge the battery.

“Change the battery pack.” Depleted. Recharge the battery.

Using the battery and charger effectively

•Charge the battery on the day, or the day before, it will be used.

Charged batteries continue to discharge naturally even if they are not used.

•How to store the battery for long periods:

Deplete and remove the battery from the camera. Attach the terminal cover and

store the battery. Storing a battery for long periods of time (about a year) without

depleting it may shorten its life span or affect its performance.

•The battery charger can also be used when abroad.

The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power.

If the plug does not fit the outlet, use a commercially available plug adapter. Do

not use electrical transformers for foreign travel as they will cause damage.

•The battery may develop a bulge.

This is a normal characteristic of the battery and does not indicate a problem.

However, if the battery bulges to the point where it will no longer fit into the

camera, please contact a Canon Customer Support Help Desk.

•If the battery is quickly depleted even after charging, it has reached the end of

its life span. Purchase a new battery.

Attach the cover to a charged battery so that

the o mark is visible.

The cards below can be used without restrictions on their capacities.

•SD memory cards*

•SDHC memory cards*

•SDXC memory cards*

•MultiMediaCards

•MMCplus memory cards

•HC MMCplus memory cards

* This memory card complies with the SD standards. Some cards may not operate

properly depending on the brand of card used.

Insert the included battery and a memory card (sold separately).

Check the card’s write-protect tab.

zIf the memory card has a write-protect tab,

you will not be able to record images if the

tab is in the locked position. Slide the tab

up until you hear a click.

Open the cover.

zSlide the cover ( ) and open it ( ).

Insert the battery.

zInsert the battery as shown until it locks

into place with a click.

zBe sure to insert the battery in the correct

direction or it will not properly lock into

place.

Depending on your computer’s OS version, SDXC memory cards may not

be recognized even when using a commercially available card reader.

Check to make sure that your OS supports SDXC memory cards

beforehand.

Compatible Memory Cards (Sold Separately)

Inserting the Battery and Memory Card

Insert the memory card.

zInsert the memory card as shown until it

locks into place with a click.

zBe sure the memory card is oriented

correctly. Inserting the memory card in the

wrong direction could damage the camera.

Close the cover.

zClose the cover ( ), and press downward

as you slide it until it clicks into place ( ).

Terminal

Label

What if [Memory card locked] appears on the screen?

SD, SDHC and SDXC memory cards have a write-protect tab. If this tab is in the

locked position, [Memory card locked] will appear on the screen and you will not

be able to take or erase images.

Inserting the Battery and Memory Card

Removing the Battery and Memory Card

Remove the battery.

zOpen the cover and press the battery lock

in the direction of the arrow.

XThe battery will pop up.

Remove the memory card.

zPush the memory card in until you hear a

click, then slowly release it.

XThe memory card will pop up.

Number of Shots per Memory Card

• Values are based on the default settings.

• The number of shots that can be taken will vary depending on camera settings, the

subject and the memory card used.

Memory Card 4 GB 16 GB

Number of Shots

Approx. 935

Approx. 1058

Approx. 3830

Approx. 4334

Can you check the number of shots that can be taken?

You can check the number of shots that can be taken when the camera is in a

Shooting mode (p. 24).

Number of shots that

can be taken

The Date/Time settings screen will appear the first time the camera is turned

on. Since the dates and times recorded into your images are based on these

settings, be sure to set them.

Turn on the camera.

zPress the ON/OFF button.

XThe Date/Time screen will appear.

Set the date and time.

zPress the qr buttons to choose an option.

zPress the op buttons to set a value.

Complete the setting.

zPress the m button.

XOnce the date and time have been set, the

Date/Time screen will close.

zPressing the ON/OFF button will turn off

the camera.

Setting the Date and Time

Reappearing Date/Time screen

Set the correct date and time. If you have not set the date and time, the Date/Time

screen will appear each time you turn on the camera.

Daylight saving time settings

If you choose in Step 2 and press the op buttons to choose , you will set

the time to daylight saving (1 hour ahead).

Setting the Date and Time

Changing the Date and Time

You can change the current date and time settings.

Display the menu.

zPress the n button.

Choose [Date/Time] from the 3

tab.

zMove the zoom lever to choose the 3 tab.

zPress the op buttons to choose

[Date/Time], then press the m button.

Change the date and time.

zFollow Steps 2 and 3 on p. 19 to adjust the

setting.

zPress the n button to close the menu.

Date/Time battery

•The camera has a built-in date/time battery (backup battery) that allows the

date/time settings to be retained for about three weeks after the battery pack

has been removed.

•By inserting a charged battery or connecting an AC adapter kit (sold separately,

p. 39) the date/time battery can be charged in about 4 hours even if the camera

is not turned on.

•If the date/time battery is depleted, the Date/Time screen will appear when you

turn the camera on. Follow the steps on p. 19 to set the date and time.

You can change the language that displays on the screen.

Enter Playback mode.

zPress the 1 button.

Display the settings screen.

zPress and hold the m button, then

immediately press the n button.

Set the display language.

zPress the opqr buttons to choose a

language, then press the m button.

XOnce the display language has been set,

the settings screen will close.

Setting the Display Language

What if the clock appears when the m button is pressed?

The clock will appear if too much time passes between pressing the m button

and the n button in Step 2. If the clock appears, press the m button to

remove the clock and repeat Step 2.

You can also change the display language by pressing the n button

to choose [Language] from the 3 tab.

Before you use a new memory card or one that has been formatted in other

devices, you should format the card with this camera.

Formatting (initializing) a memory card erases all data on the memory card.

As you cannot retrieve the erased data, exercise adequate caution before

formatting the memory card.

Display the menu.

zPress the n button.

Choose [Format].

zMove the zoom lever to choose the 3 tab.

zPress the op buttons to choose [Format],

then press the m button.

Choose [OK].

zPress the qr buttons to choose [OK], then

press the m button.

Format the memory card.

zPress the op buttons to choose [OK],

then press the m button.

XThe memory card will be formatted.

Formatting Memory Cards

Pressing the Shutter Button

Complete formatting.

XWhen formatting ends, [Memory card

formatting complete] will appear on the

screen.

zPress the m button.

To take images that are in focus, be sure to first press the shutter button

lightly (halfway) to focus, then press fully to shoot.

Press halfway (Press lightly to focus).

zPress lightly until the camera beeps twice

and AF frames appear where the camera

focused.

Press fully (Press fully to shoot).

XThe camera plays the shutter sound and

takes the shot.

Formatting or erasing data on a memory card merely changes the file

management information on the card and does not ensure its contents are

completely erased. Be careful when transferring or disposing of a memory

card. When disposing of a memory card, take precautions such as

physically destroying the card to prevent personal information leaks.

•The total capacity of the memory card displayed in the formatting screen

may be less than indicated on the memory card.

•Perform a low-level format (p. 151) of the memory card when the camera

does not operate properly, the recording/reading speed of a memory card

has dropped, when continuous shooting speed slows down, or when

movie recording stops suddenly.

Pressing the Shutter Button

If you shoot without pressing the shutter button halfway, the image may not

be in focus.

Since the camera can determine the subject and shooting conditions, you can

let it automatically select the best settings for the scene and just shoot. The

camera can also detect and focus on faces, setting the color and brightness

to optimal levels.

Turn on the camera.

zPress the ON/OFF button.

XThe start-up screen will appear.

Enter A mode.

zSet the mode dial to A.

zWhen you point the camera toward the

subject, the camera will make a slight

noise as it determines the scene.

XThe icon for the determined scene will

appear in the upper right of the screen.

XThe camera will focus on detected

subjects and display frames on them.

Compose the shot.

zMoving the zoom lever toward i

(telephoto) will zoom in on your subject,

making it appear larger. Moving the lever

toward j (wide angle) will zoom out from

your subject, making it appear smaller.

(The zoom bar showing the zoom position

appears on the screen.)

Focus.

zPress the shutter button halfway to focus.

Taking Pictures (Smart Auto)

XWhen the camera focuses, it will beep

twice and AF frames will appear where the

camera focused.

Several AF frames will appear when the

camera focuses on more than one point.

Shoot.

zPress the shutter button fully to shoot.

XThe camera will play the shutter sound and

shoot. The flash will automatically fire in

low light conditions.

XThe image will appear on the screen for

approximately two seconds.

zYou can take a second picture even while

an image is displayed by pressing the

shutter button again.

AF Frame

What if...

•What if the color and brightness of the images do not turn out as

expected?

The scene icon (p. 172) that appears on the screen may not match the actual

scene. If this happens, try shooting in G mode (p. 83).

•What if white and gray frames appear when you point the camera toward

a subject?

A white frame appears on the face or subject that the camera detected as the

main subject, while gray frames appear on other detected faces. The frames will

follow the subjects within a certain range (p. 92).

If the subject moves, however, the gray frames will disappear, leaving only the

white frame.

•What if a frame does not appear on the subject you want to shoot?

The subject may not be detected, and frames may appear on the background.

If this happens, try shooting in G mode (p. 83).

•What if a blue frame appears when you press the shutter button halfway?

A blue frame appears when a moving subject is detected; the focus and

exposure will continuously adjust (Servo AF).

Taking Pictures (Smart Auto)

•What if a flashing appears?

Attach the camera to a tripod so that the camera does not move and blur the

image.

•What if the camera does not play any sounds?

Pressing the l button while turning on the camera power will turn off all

sounds. To turn the sounds on, press the n button to choose [Mute] from

the 3 tab, then press the qr buttons to choose [Off].

•What if the image comes out dark even if the flash fired when shooting?

The subject is too far away for the flash to reach. The effective flash range is

approximately 30 cm – 4.0 m (12 in. – 13 ft.) at maximum wide angle (j), and

approximately 50 cm – 2.0 m (1.6 – 6.6 ft) at maximum telephoto (i).

•What if the camera beeps once when the shutter button is pressed

halfway?

Your subject may be too close. Move the following distances away from your

subject and shoot:

When at maximum wide angle (j): Approximately 3.0 cm (1.2 in.) or more.

When at maximum telephoto (i): Approximately 90 cm (3.0 ft.) or more

, and approximately 80 cm (2.6 ft.) or more .

•What if the lamp lights when the shutter button is pressed halfway?

To reduce red-eye and to assist in focusing, the lamp may light when shooting

in dark areas.

•What if the h icon blinks when you try to shoot?

The flash is charging. You can shoot when recharging ends.

What if an icon appears in the upper right of the screen?

The icon for the determined scene will appear in the upper right of the screen. For

details on the icons that appear, see “Scene Icons” (p. 172).

Choosing the subject to focus on (Tracking AF)

After pressing the o button and displaying , point the camera so that is

on the subject you want to focus on. Press and hold the shutter button halfway to

display a blue frame where focus and exposure will be maintained (Servo AF).

Press the shutter button fully to shoot.

You can view the images you have taken on the screen.

Enter Playback mode.

zPress the 1 button.

XThe last image you took will appear.

Choose an image.

zPressing the q button will cycle through

the images from newest to oldest.

zPressing the r button will cycle through

the images from oldest to newest.

zThe images change more quickly if you

keep the qr buttons pressed, but they will

appear coarse.

zThe lens will retract after approximately 1

minute elapses.

zPressing the 1 button again while the

lens is retracted will turn off the power.

Viewing Images

Switching to Shooting mode

Pressing the shutter button halfway, or turning the mode dial in Playback mode

switches the camera to Shooting mode.

You can choose and erase images one at a time. Please note that erased

images cannot be recovered. Exercise adequate caution before erasing an

image.

Enter Playback mode.

zPress the 1 button.

XThe last image you took will appear.

Choose an image to erase.

zPress the qr buttons to display an image

to erase.

Erase the image.

zPress the p button.

X[Erase?] appears on the screen.

zPress the qr buttons to choose [Erase],

then press the m button.

XThe displayed image will be erased.

zTo exit instead of erasing, press the qr

buttons to choose [Cancel], then press the

m button.

Erasing Images

In Easy mode, operational instructions are displayed on the screen, and the

camera is set so that only the buttons and the zoom lever explained on this

page are functional. This prevents incorrect operation of the camera, allowing

even beginners to take worry-free pictures.

Shooting

zSet the mode dial to 9.

zFollow Steps 3 – 5 on pp. 24 25 – to shoot

(no sound will play).

zPress the r button to turn off the flash. !

will appear on the screen. Pressing the r

button again turns on the flash and

appears on the screen. The flash will

automatically fire in low light conditions.

Viewing

zPress the 1 button, then press the qr

buttons to switch images.

zPress the 1 button, then press the m

button, and all the shots you have taken

will display for about 3 seconds each.

Press the m button again to stop the

slideshow.

zTo erase images, follow the steps on p. 28.

Shooting or Viewing Images in Easy Mode

The camera can automatically select all settings so that you can shoot movies

just by pressing the shutter button.

Enter E mode.

zSet the mode dial to E.

Compose the shot.

zMoving the zoom lever toward i will

zoom in on your subject, making it appear

larger. Moving the lever toward j will

zoom out from your subject, making it

appear smaller.

Focus.

zPress the shutter button halfway to focus.

XWhen the camera focuses, it will beep

twice.

Shoot.

zPress the shutter button fully.

Shooting Movies

Remaining Time

Shooting Movies

XRecording will start, and [ Rec] and the

elapsed time will appear on the screen.

zOnce shooting begins, take your finger off

the shutter button.

zIf you change the composition of your shot

during shooting, the focus will stay the

same, but the brightness and tone will

automatically adjust.

zDo not touch the microphone while

shooting.

zDo not press any buttons other than the

shutter button while shooting. The sound

the buttons make will be recorded in the

movie.

Stop shooting.

zPress the shutter button fully again.

XThe camera will beep once and stop

shooting the movie.

XThe movie will record to the memory card.

XShooting will automatically stop when the

memory card fills.

Elapsed Time

Microphone

Zooming while shooting

Pressing the zoom lever while shooting will zoom in on or out from the subject.

However, movies shot at zoom factors that appear in blue will be coarse.

Operation sounds will be recorded.

Viewing Movies

Shooting Time

• Shooting times are based on default settings.

• Maximum clip length is approx. 10 minutes.

• Recording may stop even if the maximum clip length has not been reached on some

memory cards. SD Speed Class 4 or higher memory cards are recommended.

You can view the movies you have shot on the screen.

Enter Playback mode.

zPress the 1 button.

XThe last image you took will appear.

X appears on movies.

Choose a movie.

zPress the qr buttons to choose a movie,

then press the m button.

zThe movie control panel will appear.

Memory Card 4 GB 16 GB

Shooting Time Approx. 22 min. 5 sec. Approx. 1 hr. 30 min. 30 sec.

Viewing Movies

Play the movie.

zPress the qr buttons to choose

(Play), then press the m button.

XThe movie will play.

zIf you press the m button, you can pause

or resume playback.

zPress the op buttons to adjust the

volume.

XAfter the movie finishes, appears.

How can I play back movies on a computer?

Install the included software (p. 35).

•When watching a movie on a computer, frames may drop, it may not play

smoothly, and the audio may stop suddenly depending on the computer’s

capabilities.

•If you use the supplied software to copy the movie back onto the memory card,

you can play back the movie smoothly with the camera. For enhanced playback

you can also connect the camera to a TV.

You can use the included software to transfer images you have shot with the

camera to a computer for viewing. If you are already using software included

with another Canon-brand compact digital camera, install the software from

the included CD-ROM, overwriting your current installation.

System Requirements

Windows

* For Windows XP, Microsoft .NET Framework 3.0 or later (max. 500 MB) must be

installed. Installation may take some time depending on your computer’s capabilities.

Macintosh

OS Windows 7

Windows Vista Service Pack 1 and 2

Windows XP Service Pack 3

Computer model The above OS should be pre-installed on computers with built-in

USB ports.

CPU Pentium 1.3 GHz or higher (still images), Core2 Duo 1.66 GHz or

higher (movies)

RAM Windows 7 (64 bit): 2 GB or more

Windows 7 (32 bit), Windows Vista (64 bit, 32 bit): 1 GB or more

Windows XP: 512 MB or more (still images), 1 GB or more (movies)

Interface USB

Free Hard Disk

Space

ZoomBrowser EX: 200 MB or more

CameraWindow: 150 MB or more*

Movie Uploader for YouTube: 30 MB or more

PhotoStitch: 40 MB or more

Display 1,024 x 768 pixels or higher

OS Mac OS X (v10.5 – v10.6)

Computer model The above OS should be pre-installed on computers with built-in

USB ports.

CPU Intel Processor (still images), Core Duo 1.66 GHz or higher

(movies)

RAM Mac OS X v10.6: 1 GB or more

Mac OS X v10.5: 512 MB or more (still images), 1 GB or more

(movies)

Interface USB

Free Hard Disk

Space

ImageBrowser: 250 MB or more

CameraWindow: 150 MB or more

Movie Uploader for YouTube: 30 MB or more

PhotoStitch: 50 MB or more

Display 1,024 x 768 pixels or higher

Transferring Images to a Computer for Viewing

Preparations

Windows Vista and Mac OS X (v10.5) are used for these explanations.

Install the Software.

Windows

Place the CD in the computer’s CD-

ROM drive.

zPlace the supplied CD-ROM (DIGITAL

CAMERA Solution Disk) (p. 2) into the

computer’s CD-ROM drive.

Begin installation.

zClick [Easy Installation] and follow the

on-screen instructions to proceed with the

installation.

zIf the [User Account Control] window

appears, follow the on-screen instructions

to proceed.

When the installation finishes, click

[Restart] or [Finish].

Remove the CD-ROM.

zRemove the CD-ROM when your desktop

screen appears.

Macintosh

Place the CD in the computer’s CD-

ROM drive.

zPlace the supplied CD-ROM (DIGITAL

CAMERA Solution Disk) (p. 2) into the

computer’s CD-ROM drive.

Begin installation.

zDouble-click the on the CD.

zClick [Install], and follow the on-screen

instructions to proceed with the

installation.

Transferring Images to a Computer for Viewing

Connect the camera to the

computer.

zTurn off the camera.

zOpen the cover and insert the included

interface cable’s smaller plug (p. 2) firmly

into the camera terminal in the direction

shown.

zInsert the interface cable’s larger plug into

the computer. For connection details, refer

to the user guide provided with the

computer.

Turn on the camera.

zPress the 1 button to turn on the camera.

Open CameraWindow.

Windows

zClick [Downloads Images From Canon

Camera using Canon CameraWindow].

XCameraWindow will appear.

zIf CameraWindow does not appear, click

the [Start] menu and choose [All

Programs], followed by [Canon Utilities],

[CameraWindow] and [CameraWindow].

Macintosh

XCameraWindow will appear when you

establish a connection between the

camera and computer.

zIf CameraWindow does not appear, click

the CameraWindow icon on the Dock (the

bar which appears at the bottom of the

desktop).

Transferring Images to a Computer for Viewing

Transfer and View Images

zClick [Import Images from Camera], and

then click [Import Untransferred Images].

XAll images not previously transferred will

transfer to the computer. Transferred

images will be sorted by date and saved in

separate folders in the Pictures folder.

zClose CameraWindow when image

transfer is complete.

zTurn off the camera and unplug the cable.

zFor details on how to view images using a

computer, refer to the Software Guide.

For Windows 7, use the following steps to display CameraWindow.

Click on the task bar.

In the screen that appears, click the link to modify the program.

Choose [Downloads Images From Canon Camera using Canon

CameraWindow] and click [OK].

Double click .

You can transfer images even without using the image transfer function in

the included software by simply connecting your camera to a computer.

There are, however, the following limitations.

•It may take a few minutes from when you connect the camera to the

computer until you can transfer images.

•Images shot in the vertical orientation may be transferred in the horizontal

orientation.

•Protection settings for images may be lost when transferred to a

computer.

•There may be problems transferring images or image information

correctly depending on the version of the operating system in use, the file

size, or the software in use.

•Some functions in the included software may not be available, such as

editing movies, and transferring images to the camera.

Accessories

Interface Cable

IFC-400PCU*

AV Cable AVC-DC400*

DIGITAL CAMERA

Solution Disk

Wrist Strap

WS-800

Supplied with Camera

USB card reader

Windows/Macintosh

Memory Card

Canon-Brand PictBridge Compliant Printers

*Also available for purchase separately.

Battery Charger

CB-2LA/CB-2LAE*

Battery Pack NB-8L with

Terminal Cover*

AV Cable AVC-DC300*

The following camera accessories are sold separately. Some accessories are

not sold in some regions, or may no longer be available.

Power Supplies

Battery Charger CB-2LA/2LAE

zA charger for charging Battery Pack

NB-8L.

Battery Pack NB-8L

zRechargeable lithium-ion battery.

AC Adapter Kit ACK-DC60

zThis kit lets you power the camera using

household power. Recommended for

powering the camera for an extended

period of time or when connecting to a

computer or printer. Cannot be used to

charge the camera battery.

Flash

High-Power Flash HF-DC1

zThis externally mounted flash can be used

to capture photographic subjects that are

too distant for the built-in flash to

illuminate.

Separately Sold Accessories

Using Accessories Abroad

The battery charger and the AC adapter kit can be used in regions that have

100 – 240 V (50/60 Hz) AC power.

If the plug does not fit the outlet, use a commercially available plug adapter. Do

not use electrical transformers for foreign travel as they will cause damage.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.

Separately Sold Accessories

Printers

Canon-Brand PictBridge Compliant

Printers

zBy connecting your camera to a Canon-

brand PictBridge compliant printer, you

can print your images without having to

use a computer.

For more information, visit your nearest

Canon retailer.

SELPHY series

Inkjet Printers

Use of genuine Canon accessories is recommended.

This product is designed to achieve excellent performance when used with genuine

Canon accessories. Canon shall not be liable for any damage to this product and/or

accidents such as fire, etc., caused by the malfunction of non-genuine Canon

accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this

warranty does not apply to repairs arising out of the malfunction of non-genuine Canon

accessories, although you may request such repairs on a chargeable basis.

Learning More

This chapter explains the parts of the camera and what appears on the

screen, as well as the basic operating instructions.

Components Guide

Lens

Mode Dial

Zoom Lever

Shooting: i (Telephoto) / j (Wide

Angle) (pp. 24, 30, 57)

Playback: k (Magnify) / (Index) g

(pp. 114, 118)

Shutter Button (p. 23)

ON/OFF Button (p. 19)

Microphone (p. 31)

Flash , (pp. 56 85)

Lamp (pp. 60, 61, 62, 80, 157)

Tripod Socket

DC Coupler Terminal Cover (p. 164)

Memory Card / Battery Cover (p. 16)

Strap Mount (p. 13)

A/V OUT (Audio/Video Output) /

DIGITAL Terminal , , (pp. 36 120 138)

Components Guide

Lens

Mode Dial

Zoom Lever

Shooting: i (Telephoto) / j (Wide

Angle) (pp. 24, 30, 57)

Playback: k (Magnify) / (Index) g

(pp. 114, 118)

Shutter Button (p. 23)

ON/OFF Button (p. 19)

Microphone (p. 31)

Flash , (pp. 56 85)

Lamp (pp. 60, , , , 61 62 80 157)

Tripod Socket

DC Coupler Terminal Cover (p. 164)

Memory Card / Battery Cover (p. 16)

A/V OUT (Audio/Video Output)

Terminal (p. 120)

DIGITAL Terminal , (pp. 36 138)

Strap Mount (p. 13)

Components Guide

Mode Dial

Use the mode dial to change the Shooting mode.

If you turn the mode dial while in Playback mode, the camera will switch to

Shooting mode.

Movie Mode

For shooting movies

(pp. 30, 105).

You can use the largest

possible portion of the

screen to shoot movies

(p. 108).

Special Scene Mode

You can shoot with the optimum

settings for the scene (p. 68).

P Mode

Choose settings yourself to take

various types of pictures (p. 84).

Creative Filters Mode

You can add various

effects to images when

shooting (p. 72).

Auto Mode

You can leave it to the camera

to select settings for fully

automatic shooting (p. 24).

Easy Mode

You can shoot just by pressing

the shutter button (p. 29).

Discreet Mode

You can shoot with the flash

disabled and all camera

sounds muted (p. 72).

Live View Control Mode

The brightness and color can be

easily set to your preferences for

shooting (p. 71).

Components Guide

Screen (LCD Monitor)

(pp. 46, 171 173),

Speaker

0 (Face Selector) Button (p. 98)

1 (Playback) Button (pp. 27, 113)

Indicator (p. 47)

l (Display) Button (p. 46)

n Button (p. 49)

b (Exposure Compensation) (p. 85) /

d o (Jump) (p. 115) / Button

e q (Macro) (p. 91) / Button

m FUNC./SET Button (p. 48)

h r (Flash) (pp. 85, 101) / Button

Q (Self-Timer) / (pp. 60, 61 62),

a (Single Image Erase) (p. 28) /

p Button

Switching the Display

You can change the screen display using the l button. Refer to p. 171

for details on information that appears on the screen.

Shooting

Playback

Screen Display

Information Display No Information Display

You can also switch the display by pressing the l button while the

image displays right after shooting. However, Simple Information Display is

not available. You can change the display that appears first by pressing the

n button, then choosing [Review info] from the 4 tab (p. 158).

Focus Check

Display (p. 117)

Detailed Information

Display

No Information

Display

Simple Information

Display

Indicator

Screen Display in Dark Shooting Conditions

The display automatically brightens when shooting in dark conditions,

allowing you to check the composition (Night Display function). However, the

brightness of the image on the screen, and the brightness of the actual image

recorded may be different. Screen noise may appear and the movement of

the subject may appear somewhat jagged on the screen. This has no effect

on the recorded image.

Overexposure Warning during Playback

In Detailed Information Display (p. 46), overexposed areas of the image flash

on the screen.

Histogram during Playback

zThe graph that appears in Detailed

Information Display (p. 173) is called the

histogram. The histogram shows the

distribution of brightness in an image

horizontally, and the amount of brightness

vertically. When the graph approaches the

right side, the image is bright, but when it

approaches the left side, the image is dark,

and in this way you can judge the

exposure.

The indicator on the back of the camera (p. 45) will light or blink depending

on the camera’s status.

BrightDark

High

Low

Colors Status Operation Status

Green

Lights When connected to a computer (p. 36), display off (p. 155)

Blinks During camera start-up, recording/reading/transmitting

image data, when shooting long exposures (p. 81)

When the indicator blinks green, do not turn off the power, open the

memory card slot/battery cover, shake or jolt the camera. These actions

may corrupt the image data or cause the camera or memory card to

malfunction.

Indicator

You can set commonly used shooting functions using the FUNC. menu.

The menu items and options differ depending on the Shooting mode (pp. 176

– 183).

Display the FUNC. menu.

zPress the m button.

Choose a menu item.

zPress the op buttons to choose a menu

item.

XThe available options for the menu item

appear in the lower part of the screen.

zChoosing some menu items changes the

screen to display further menu options.

Choose an option.

zPress the buttons to choose an option.qr

zYou can also choose settings by pressing

the l button on options that display

Complete the setting.

zPress the m button.

XThe shooting screen will reappear and the

setting you chose will display on the

screen.

FUNC. Menu – Basic Operations

Menu Items

Available Options

Various functions can be set from the menus. The menu items are organized

under tabs, such as for shooting (4) and playback (1). The options differ

depending on the Shooting mode and the Playback mode (pp. 184 – 193).

Display the menu.

zPress the n button.

Choose a tab.

zMove the zoom lever or press the qr

buttons to choose a tab.

Choose an item.

zPress the op buttons to choose an item.

zSome items require you to press the m or

r button to display a submenu in which

you change the setting.

Choose an option.

zPress the qr buttons to choose an option.

Complete the setting.

zPress the n button to restore the

normal screen.

MENU – Basic Operations

You can silence or adjust the volume of camera sounds.

Muting Sounds

Display the menu.

zPress the n button.

Choose [Mute].

zMove the zoom lever to choose the 3 tab.

zPress the op buttons to choose [Mute],

then press the qr buttons to choose [On].

zPress the n button to restore the

normal screen.

Changing the Sound Settings

•You cannot change the sound settings in .

•You can also mute camera sounds by holding down the l button and

turning on the power.

•If you mute camera sounds, the sound will also be muted when playing

back movies (p. 32). If you press the o button while playing back a

movie, the sound will play back, and you can adjust the volume with the

op buttons.

Changing the Sound Settings

Adjusting the Volume

Display the menu.

zPress the n button.

Choose [Volume].

zMove the zoom lever to choose the 3 tab.

zPress the op buttons to choose

[Volume], then press the m button.

Change the volume.

zPress the op buttons to choose an item,

then press the qr buttons to adjust the

volume.

zPress the n button twice to restore

the normal screen.

You can adjust the brightness of the screen.

Display the menu.

zPress the n button.

Choose [LCD Brightness].

zMove the zoom lever to choose the 3 tab.

zPress the op buttons to choose [LCD

Brightness].

Adjust the brightness.

zPress the qr buttons to adjust the

brightness.

zPress the n button twice to restore

the normal screen.

Adjusting the Screen Brightness

When you have mistakenly changed a setting, you can reset the camera to

the default settings.

Display the menu.

zPress the n button.

Choose [Reset All].

zMove the zoom lever to choose the 3 tab.

zPress the op buttons to choose [Reset

All], then press the m button.

Reset the settings.

zPress the qr buttons to choose [OK], then

press the m button.

XThe camera will reset to the default

settings.

Returning the Camera to Default Settings

Are there functions that cannot be reset?

•The [Date/Time] (p. 20), [Language] (p. 21), [Video System] (p. 120), [Time

Zone] (p. 155), and the image registered in [Start-up Image] (p. 152) in the 3

tab.

•The recorded custom white balance data (p. 86).

•The shooting mode chosen in K .(p. 68) or (p. 72)

•The Movie mode (p. 30).

To save battery power, the screen turns off, and the camera shuts down

automatically when it is not operated for a certain time.

Power Saving during Shooting

The screen will turn off approximately 1 minute after you stop operating the

camera. After about 2 more minutes, the lens will retract and the power will

turn off. When the screen has turned off but the lens has not yet retracted,

pressing the shutter button halfway (p. 23) turns on the screen and shooting

can continue.

Power Saving during Playback

The power will turn off approximately 5 minutes after you stop operating the

camera.

You can check the current time.

zPress and hold the m button.

XThe current time appears.

zIf you hold the camera vertically while

using the clock function, it will switch to

vertical display. Press the qr buttons to

change the display color.

zPress the m button again to cancel the

clock display.

•You can turn off the power saving function (p. 154).

•You can adjust the time before the screen turns off (p. 155).

Power Saving Function (Auto Power Down)

Clock Functions

When the camera power is off, press and hold the m button, then press

the ON/OFF button to display the clock.

Shooting with Commonly

Used Functions

This chapter explains how to use common functions, such as the self-

timer, and how to turn off the flash.

•This chapter assumes that the camera is set to A mode. When shooting

in another mode, check which functions are available in that mode (pp. 176

– 183).

You can shoot with the flash turned off.

Press the r button.

Choose !.

zPress the qr buttons to choose !, then

press the m button.

XOnce set, ! will appear on the screen.

zTo turn the flash back on, follow the steps

above to choose .

Turning the Flash Off

What if a flashing appears?

When you press the shutter button halfway in low light conditions where camera

shake is likely, a flashing will appear on the screen. Attach the camera to a

tripod to prevent it from moving.

You can use the digital zoom to zoom up to to approximately 20x maximum

, and approximately 16x maximum and capture

subjects that are too far away for the optical zoom to enlarge.

However, depending on the recording pixel setting (p. 63) and zoom factor,

the images may appear coarse (the zoom factor will appear in blue).

Move the zoom lever toward i.

zHold the lever until zooming stops.

XZooming stops at the largest possible

zoom factor without image deterioration.

The zoom factor will appear on the screen

when you release the zoom lever.

Move it toward i again.

XThe digital zoom will zoom in even further

on the subject.

Zooming in More Closely on Subjects

(Digital Zoom)

A3300 IS A3200 IS A2200

Zoom Factor

Turning off the digital zoom

To turn off the digital zoom, press the button to choose [Digital Zoom] from n

the 4 tab, then choose [Off].

The focal lengths when using the optical zoom and digital zoom together

are as follows (all focal lengths are 35mm film equivalent):

Approximately 28 – 560 mm (28 – 140 mm when using the optical zoom

alone)

Approximately 28 – 448 mm (28 – 112 mm when using the optical zoom

alone)

A3300 IS A3200 IS

A2200

Zooming in More Closely on Subjects (Digital Zoom)

Digital Tele-Converter

The focal length of the lens can be set as follows:

Approximately 1.6x or approximately 2.0x

Approximately 1.7x or approximately 2.1x ,

This enables a faster shutter speed and less chance of camera shake than

the zoom (including digital zoom) used by itself at the same zoom factor.

However, a recording pixel setting (p. 63) of or will cause images to

appear coarse (the zoom factor will appear in blue).

Display the menu.

zPress the n button.

Choose [Digital Zoom].

zMove the zoom lever to choose the 4 tab.

zPress the op buttons to choose [Digital

Zoom].

Choose the setting.

zPress the qr buttons to choose a

magnification.

zPress the n button to complete the

setting and restore the shooting screen.

XThe view will be enlarged and the zoom

factor will appear on the screen.

zTo return to standard digital zoom, choose

[Digital Zoom] and the [Standard] option.

A3300 IS

A3200 IS A2200

•The focal lengths are as follows (35mm film equivalent):

Approximately 44.8 – 224 mm when using [1.6x], and approximately

56.0 – 280 mm when using [2.0x]

Approximately 47.6 – 238 mm when using [1.7x], and approximately

58.8 – 294 mm when using [2.1x]

Approximately 47.6 – 190 mm when using [1.7x], and approximately

58.8 – 235 mm when using [2.1x]

•The digital tele-converter cannot be used together with the digital zoom.

•The shutter speeds may be the same when at maximum telephoto (i),

and when zoomed in on the subject using Step 2 on p. 57.

A3300 IS

A3200 IS

A2200

You can insert the shooting date and time in the lower right corner of an

image. Once inserted, however, they cannot be deleted. Be sure to check

beforehand that the date and time are correctly set (p. 19).

Display the menu.

zPress the n button.

Choose [Date Stamp].

zMove the zoom lever to choose the 4 tab.

zPress the op buttons to choose [Date

Stamp].

Choose the setting.

zPress the qr buttons to choose [Date] or

[Date & Time].

zPress the n button to complete the

setting and restore the shooting screen.

XOnce set, [DATE] will appear on the

screen.

Shoot.

XThe shooting date or time will be recorded

in the image’s lower right corner.

zTo restore to the original setting, choose

[Off] in Step 3.

Inserting the Date and Time

Using the Self-Timer

The self-timer can be used to shoot a group photo that includes the

photographer. The camera will shoot approximately 10 seconds after the

shutter button is pressed.

Press the p button.

Choose Ò.

zPress the op buttons to choose Ò, then

press the m button.

XOnce set, Ò will appear on the screen.

You can insert and print the shooting date in images which do not have an

embedded date and time as follows. However, if you do this for images with

an embedded date and time, the date and time may be printed twice.

•Use the DPOF print settings (p. 145) to print.

•Use the included software to print.

Refer to the Software Guide for details.

•Print using printer functions (p. 140).

Using the Self-Timer

Shoot.

zPress the shutter button halfway to focus

on the subject, then press it fully.

XWhen the self-timer starts, the lamp blinks

and the self-timer sound plays.

XTwo seconds before the shutter releases,

the lamp and sound speed up (the lamp

remains lit when the flash will fire).

zTo cancel shooting with the self-timer after

the countdown has started, press the p

button.

zTo restore the original setting, choose

in Step 2.

Using the Self-Timer to Prevent Camera Shake

The camera will shoot approximately 2 seconds after the shutter button is

pressed, preventing any camera shake that occurs when pressing the shutter

button.

Choose Î.

zFollow Step 2 on p. 60 to choose Î.

XOnce set, Î will appear on the screen.

zFollow Step 3 above to shoot.

You can change the delay and number of shots (p. 62).

Using the Self-Timer

Customizing the Self-Timer

You can set the delay (0 – 30 seconds) and the number of shots (1 – 10

shots).

Choose $.

zFollow Step 2 on p. 60 to choose $, then

press the n button immediately.

Choose the settings.

zPress the op buttons to choose [Delay]

or [Shots].

zPress the qr buttons to choose a value,

then press the m button.

XOnce set, $ will appear on the screen.

zFollow Step 3 on p. 61 to shoot.

What if the number of shots is set to two or more shots?

•Exposure and white balance settings are set with the first shot.

•If the flash fires or you set a high number of shots, the shooting interval may take

longer than usual.

•If the memory card fills, shooting stops automatically.

When you set the delay for more than 2 seconds, the lamp and self-timer

sound speed up 2 seconds before the shutter releases (the lamp remains

lit when the flash will fire).

You can choose from 5 recording pixel settings.

Choose the recording pixel setting.

zAfter pressing the m button, press the

op buttons to choose .

Choose an option.

zPress the qr buttons to choose an option,

then press the m button.

XThe setting will appear on the screen.

zTo restore the original setting, choose

in Steps 1 – 2.

You can choose from the following 2 compression ratios (image quality):

(Fine), (Normal).

Choose the compression ratio

setting.

zAfter pressing the m button, press the

op buttons to choose .

Choose an option.

zPress the qr buttons to choose an option,

then press the m button.

XThe setting will appear on the screen.

zTo restore the original setting, choose

in Steps 1 – 2.

Changing the Recording Pixel Setting

(Image Size)

If you choose , you cannot use the digital zoom (p. 57) or digital tele-

converter (p. 58).

Changing the Compression Ratio

(Image Quality)

Changing the Compression Ratio (Image Quality)

Approximate Values for Recording Pixels and Compression Ratio

• The values in the table are measured according to Canon standards and may change

depending on the subject, memory card and camera settings.

• The values in the table are measured according to Canon standards and may change

depending on the subject, memory card and camera settings.

Recording Pixels Compression

Ratio

Single Image Data

Size (Approx. KB)

Number of Shots per

Memory Card

(Approx. shots)

4 GB 16 GB

(Large)

16M/4608x3456

4093 935 3830

1956 1915 7844

(Medium 1)

8M/3264x2448

2060 1828 7487

980 3771 15443

(Medium 2)

2M/1600x1200

558 6352 26010

278 12069 49420

(Small)

0.3M/640x480

150 20116 82367

84 30174 123550

(Widescreen)

4608x2592

3069 1243 5094

1467 2567 10514

Recording Pixels Compression

Ratio

Single Image Data

Size (Approx. KB)

Number of Shots per

Memory Card

(Approx. shots)

4 GB 16 GB

(Large)

14M/4320x3240

3597 1058 4334

1719 2194 8985

(Medium 1)

7M/3072x2304

1897 1978 8101

902 4022 16473

(Medium 2)

2M/1600x1200

558 6352 26010

278 12069 49420

(Small)

0.3M/640x480

150 20116 82367

84 30174 123550

(Widescreen)

4320x2432

2700 1403 5746

1291 2873 11766

Changing the Compression Ratio (Image Quality)

Approximate Values for Paper Size

z For sending images as e-mail

attachments.

z For displaying on wide-screen HD TVs

with an aspect ratio of 16:9.

A2 (16.5 x 23.4in.)

A3 – A5

(11.7 x

16.5 – 5.8 x 8.3in.)

5 x 7in.

Postcard size

3.5 x 5in.

Adding Effects and Shooting

in Various Conditions

This chapter explains how to add effects and how to shoot in various

conditions.

The camera will select the necessary settings for the conditions in which you

wish to shoot when you choose the matching mode.

Enter K mode.

zSet the mode dial to K.

Choose a Shooting mode.

zAfter pressing the m button, press the

op buttons to choose the following:

zPress the qr buttons to choose a

Shooting mode, then press the m button.

Shoot.

Take shots with reduced blur

(Blur Reduction)

zLets you shoot with reduced camera shake

and subject blur.

ITake portraits (Portrait)

zProduces a soft effect when

photographing people.

Shooting in Various Conditions

JTake landscapes (Landscape)

zLets you shoot majestic landscapes with a

real sense of depth.

V Take shots of kids and pets

(Kids&Pets)

zLets you capture subjects that move

around, such as children and pets, without

missing photo opportunities.

zMove approximately 1 m (3.3 ft.) or more

away from your subject and shoot.

Take shots in low light conditions

(Low Light)

zLets you take shots in dark places with

reduced camera shake and subject blur.

wTake shots of people at the beach

(Beach)

zLets you take shots of brightly lit people on

sandy beaches where the reflected

sunlight is strong.

OTake shots of foliage (Foliage)

zLets you shoot trees and leaves, such as

new growth, autumn leaves or blossoms,

in vivid colors.

You can easily change the brightness, color and tone to match your

preferences when shooting.

Set the camera to mode.

zSet the mode dial to .

Press the m button.

XThe setting screen will appear.

Adjust the setting.

zPress the op buttons to choose an

option, then press the qr buttons while

watching the screen to adjust the setting.

zPress the m button.

Shoot.

Easily Changing the Brightness and Color

When Shooting (Live View Control)

Brightness You can adjust the brightness of the image. The more to the right, the

brighter the image gets, the more to the left, the darker the image gets.

Color You can change the color of the image. The more to the right, the more

vivid the image gets, the more to the left, the more neutral the image gets.

Tone

You can adjust the tone of the image.The more to the right, the stronger the

warm red tones get, the more to the left, the the stronger the cool blue tones

get.

You can shoot with camera sounds muted, and the flash and lamp

deactivated. Use this mode in areas where camera sounds, lights and flash

are not permitted.

Set the camera to mode.

zSet the mode dial to .

Shoot.

You can add various effects to images when shooting.

Set the camera to mode.

zSet the mode dial to .

Choose a Shooting mode.

zAfter pressing the m button, press the

op buttons to choose .

zPress the qr buttons to choose a

Shooting mode, then press the m button.

Shoot.

Shooting in Discreet Mode

When the camera is set to mode, sounds will remain muted even when

in Playback mode. Operation sounds will be muted, and audio will not play

back when viewing movies.

Adding Effects and Shooting

(Creative Filters)

Since you may not achieve the expected results with images shot in ,

, , and , try taking some test shots first.

Adding Effects and Shooting (Creative Filters)

Take Shots That Look Like a Miniature Model

(Miniature Effect)

Blurs chosen portions in the top and bottom of an image to produce the effect

of a miniature model.

Choose .

zFollow Steps 1 – 2 on p. 72 to choose .

XA white frame (the area that will not be

blurred) appears on the screen.

Choose the area to keep in focus.

zPress the l button.

zMove the zoom lever to change the frame

size, and press the op buttons to change

the frame position, then press the l

button.

Shoot.

•If you press the m button in Step 2, the horizontal/vertical orientation of

the frame will switch, and you can press the qr buttons to change the

frame position when it is displayed vertically.

•Holding the camera vertically will change the orientation of the frame.

Specyfikacje produktu

Marka:	Canon
Kategoria:	aparat fotograficzny
Model:	PowerShot A3300 IS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Canon PowerShot A3300 IS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje aparat fotograficzny Canon

Canon WFT-E1A Instrukcja

16 Września 2024

Canon WFT-E2A Instrukcja

16 Września 2024

Canon ELPH 370Z Instrukcja

9 Sierpnia 2024

Canon Demi EE17 Instrukcja

6 Sierpnia 2024

Canon Ixus 230 HS Instrukcja

29 Lipca 2024

Canon Ixus 300 HS Instrukcja

29 Lipca 2024

Canon PowerShot A2300 Instrukcja

29 Lipca 2024

Canon PowerShot SD3500 IS Instrukcja

29 Lipca 2024

Canon Ixus SD4000 IS Instrukcja

29 Lipca 2024

Canon EOS Rebel T3 Instrukcja

29 Lipca 2024

Instrukcje aparat fotograficzny

Najnowsze instrukcje dla aparat fotograficzny

Fujifilm Instax Mini 7 Instrukcja

15 Stycznia 2025

Mamiya C220 Professional Instrukcja

13 Października 2024

Mamiya 528 AL Instrukcja

11 Października 2024

Ricoh TLS 401 Instrukcja

10 Października 2024

Kodak Advantix 2100 Instrukcja

10 Października 2024

Kodak Advantix 3800ix Instrukcja

24 Września 2024

Kodak Advantix 3600ix Instrukcja

24 Września 2024

SereneLife PICKIT20 Instrukcja

17 Września 2024

Imou Cell 3C All in One Instrukcja

16 Września 2024

Imou Cell 3C Instrukcja

16 Września 2024