Instrukcja obsługi Canon Pixma Pro 9500

Canon drukarka Pixma Pro 9500

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Canon Pixma Pro 9500 (2 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Start Here

Easy Setup Instructions series

Photo Printer

1Unpack the Printer

Carefully remove all items from the box.

Remove the tapes from the printer.

NOTE:

· It takes about an hour to complete the setup of the

printer.

· A USB cable is necessary to connect the printer

with your computer.

Power Cord

PIXMA Pro9500 series

Print Head

Documentation and

Software Kit

PIXMA Pro9500 series

Photo Printer

2Prepare the Printer

Plug the power cord into the back of the printer

and connect the other end to a power outlet.

Press the POWER button. The printer will

initialize. Wait until the POWER lamp displays a

steady blue light.

Open the Front Tray. Raise the Top Cover.

NOTE: Gently press the mark on the

Front Tray. The Front Tray automatically opens.

The Print Head Holder automatically moves to

the center. Remove the protective tape from

the Print Head Holder. The tape position is

subject to change.

Write down the serial number located inside

the printer. You will need this to register your

products.

IMPORTANT: If the Top Cover is left open for

more than 10 minutes, the Print Head Holder

moves to the right. Close and reopen the Top

Cover to return the holder to the center.

3Install the Print Head

Firmly raise the print head lock lever.

Remove the Print Head from its package.

CAUTION: There might be some transparent or

light color ink on the inside of the bag the Print

Head comes in - this has no effect on print

quality. Be careful not to get ink on yourself

when handling these items.

NOTE: Do not touch the nozzles.

Remove and discard the orange protective cap

from the Print Head.

CAUTION: There might be some transparent or

light color ink on the inside of the protective

cap - this has no effect on print quality. Be

careful not to get ink on yourself when handling

these items.

NOTE:

· Do not touch the print head nozzles and the

electrical contacts.

· Do not attempt to reattach the protective cap once

it has been removed.

Slide the Print Head into the holder.

The Print Head will rest at a slight angle.

NOTE: Do not touch the electrical contacts.

Lower the print head lock lever carefully.

4Install the Ink Tanks

Remove the Red Ink Tank (PGI-9R) from its

package.

Remove and discard the orange protective cap

located on the bottom of the ink tank.

IMPORTANT: Do not touch the electrical

contacts.

NOTE:

· To avoid spilling ink, never press on the sides of

an ink tank.

· Do not touch the open ink port once the protective

cap is removed, as this may prevent the ink from

being ejected properly.

Insert the ink tank into the rightmost slot.

Press the mark on the ink tank until it clicks

into place and then its lamp lights red.

Insert the remaining nine ink tanks into their

assigned slots. Ensure that ink lamps light red.

Close the Top Cover. Lift open the Paper

Support and the Paper Support Extension, then

pull out the Front Tray Extension.

NOTE: If the ALARM lamp on the printer flashes

orange after you have closed the Top Cover, an

ink tank may not be installed properly. Open the

Top Cover and make sure that the ink tanks are

installed in the correct order directed on the

label.

5Connect the Printer

and Load Paper

IMPORTANT: When the POWER lamp flashes

blue and the printer vibrates, the printer is

shaking the ink tanks. Once you have installed

the ink tanks and have closed the Top Cover,

wait for about 2 minutes 30 seconds until the

POWER lamp stops flashing and stays lit, and

the printer has stopped making operating

noises before proceeding. Do not open the Top

Cover while the printer is operating (the POWER

lamp is flashing blue).

TURN THE PRINTER OFF.

IMPORTANT: Be sure the printer is off before

continuing, or the computer will attempt to

install the printer driver before the printer is

ready.

Connect one end of the USB cable to the

computer, the other to the appropriate USB

port on the printer.

NOTE: The Pro9500 series Photo Printer is

equipped with USB 2.0 Hi-Speed port. If your PC

does not support USB 2.0 Hi-Speed, or if any

non-certified USB 2.0 cable or driver is used for

the connection, the printer will operate at a

lower speed provided under USB 1.1.

Pinch the Paper Guide and slide it to the left.

Load two sheets of plain paper into the Auto

Sheet Feeder, align the paper with the right

edge of the Auto Sheet Feeder, then slide the

Paper Guide toward the left edge of the paper.

IMPORTANT: Print Head Alignment (Step 6)

requires that letter size paper is loaded in the

Auto Sheet Feeder (top paper feeder).

Top Cover

Tear at notch to open

Nozzles

Print Head

Nozzles

Electrical

Contacts

Electrical

Contacts

USB Cable

USB Port

Protective Cap

click

Auto Sheet

Feeder

Paper

Guide

Continue with Step 6

on the back page.

Front Tray Extension

Paper Support

Extension

Paper Support

Top Cover

POWER Button

POWER Lamp

USB Port

Protective Tape

Serial Number Location

PGI-9PM

Photo

Magenta

PGI-9PBK

Photo

Black

PGI-9MBK

Matte

Black PGI-9PC

Photo

Cyan PGI-9GY

Gray

PGI-9M

Magenta

PGI-9Y

Yellow

PGI-9C

Cyan PGI-9G

Green PGI-9R

Red

Electrical Contacts

Ink Lamp

Print Side

Refer to the color

guide on the print

head lock lever.

Front Tray

Ink Port

Q T 5 0 1 4 4 V 0 2

Windows

Macintosh

NOTE: The screens below refer to Windows XP

Service Pack 2 installation. Screens may differ

depending on the operating system you are

using.

Be sure to TURN THE PRINTER OFF before

continuing.

Turn on the computer and start Windows.

NOTE:

· For Windows XP or Windows 2000, log on to

Windows as a member of the Administrators group

before continuing.

· Before installing the driver, disable all anti-virus

programs and automatically loading programs.

IMPORTANT: If you see the Found New

Hardware Wizard, remove the USB cable. Click

Cancel to quit the screen. Next, turn off the

printer. Then proceed from step to install

the printer driver.

Insert the

Setup CD-ROM

. The setup program

should run automatically.

NOTE: If the installer in the CD-ROM does not

run automatically, click Start and select My

Computer, then double-click the CD-ROM icon

When the main menu appears, click Easy

Install.

NOTE:

· Select Easy Install in order to install the application

software, on-screen manuals and printer driver.

Select Custom Install in order to choose the options

you would like to install.

· Adobe®Photoshop®CS, Adobe Photoshop CS2, or

Digital Photo Professional must be installed to use

Easy-PhotoPrint Pro.

When the list of applications to install appears,

verify the contents, click Install, then follow the

instructions on the screen.

Move the cursor over items to display

explanations of each application below.

Read the License Agreement and click Yes.

Follow the on-screen instructions to install the

software.

If a message asking for your confirmation to

restart your computer appears, click OK.

The system is restarted automatically.

When the Printer Connection screen appears,

ensure that the printer is connected to the

computer with the USB cable, then TURN THE

PRINTER ON. The software will begin

identifying the printer port being used.

IMPORTANT: If your computer cannot detect a

printer port, click and refer to the onlineHelp

instructions.

If a message asking for your confirmation to

restart your computer appears, click OK.

The system is restarted automatically.

When the Print Head Alignment screen

appears, ensure that two sheets of letter size

paper are loaded in the Auto Sheet Feeder (top

paper feeder). Click Execute, read the message

and click Print Head Alignment.

NOTE:

· Print head alignment will take about nine minutes

to complete. Do not start another operation here.

· Do not open the Top Cover while printing.

Print head alignment is automatically adjusted

by printing the patterns below.

NOTE:

Some parts of the first pattern that is printed will be faint.

· If the pattern is not printed successfully, refer to

“Eleven flashes” in “Handling Error Messages” in

the Quick Start Guide. When you align the print

head again, the pattern that is printed is different

from the pattern shown above.

After print head alignment is completed, click Next.

When the Installation Results screen appears,

click Next.

When the User Registration screen appears,

click Register.

NOTE:

· Follow on-screen instructions to register your

product. You will need your product serial number,

which is located on the inside of the printer. See

Step 2- on the front page. If you intend to register

later, double-click on the desktop after Step .

· If your computer is not connected to the Internet,

click Next.

Go back to the User Registration screen, then

click Next.

We would appreciate it if you would take part in

the PIXMA Extended Survey Program regarding

the use of Canon printers. For details, refer to the

on-screen instructions.

When the Installation completed successfully

screen appears, click Exit.

If Restart is displayed, ensure the Restart the

system now (recommended) check box is

selected, then click Restart.

IMPORTANT: Since Mac®OS 9, Mac OS X Classic

environments, or Mac OS X v.10.2.7 or earlier

are not supported, do not connect the printer to

these.

NOTE:

· Use Mac OS X v.10.2.8 to 10.4.x.

· The screens below refer to Mac OS X v.10.4.x

installation. Screens may differ depending on the

operating system you are using.

· Before installing the driver, disable all anti-virus

programs and automatically loading programs.

Turn on your Mac and your printer and insert

the

Setup CD-ROM

If the CD-ROM folder does not open automatically,

double-click the on the desktop.

NOTE: Log on as an Administrator before

continuing.

Double-click the S

p icon.

NOTE: When the Authenticate screen appears,

enter your administrator name and password,

then click OK.

If you do not know your administrator name or

password, click on the lower-left corner of

the screen, then follow the on-screen

instructions.

When the main menu appears, click Easy

Install Installand then , then follow the on-

screen instructions.

NOTE:

· Select Easy Install in order to install the

application software, on-screen manuals and

printer driver. Select Custom Install in order to

choose the options you would like to install.

· Adobe Photoshop CS, Adobe Photoshop CS2, or

Digital Photo Professional must be installed to use

Easy-PhotoPrint Pro.

Read the License Agreement and click Yes.

Follow the on-screen instructions to install the

software.

When the Print Head Alignment Recommended

screen appears, click Next.

When the User Registration screen appears,

click Register.

NOTE:

· Follow on-screen instructions to register your

product. You will need your product serial number,

which is located on the inside of the printer. See

Step 2- on the front page. If you intend to register

later, double-click on the desktop after Step .

· If your computer is not connected to the Internet,

click Next.

Go back to the User Registration screen, then

click Next.

When the Installation completed successfully

screen appears, click Restart.

The system is restarted automatically.

Start the print head alignment procedure.

a. After restarting the computer, select

Applications Gofrom the menu. Double-

click the Utilities folder, then the Printer

Setup Utility (Print Center when using Mac

OS X v.10.2.8) icon.

b. When the Printer List screen appears, select

Pro9500 series from the Name list, then

click Utility (Configure when using Mac OS X

v.10.2.8) icon.

If the printer is not displayed on the Printer

List, click Add to add the printer.

For details, follow the instructions in Mac

Help.

c. Select Pro9500 series from the Product list

and click Maintenance.

d. Ensure that two sheets of letter size paper

are loaded in the Auto Sheet Feeder (top

paper feeder).

e. Click the down-arrow to select Test Print.

Click the Print Head Alignment icon, read

the message and click Print Head

Alignment.

NOTE:

· Print head alignment will take about nine minutes

to complete. Do not start another operation here.

· Do not open the Top Cover while printing.

Print head alignment is automatically adjusted

by printing the patterns below.

NOTE:

· Some parts of the first pattern that is printed will

be faint.

· If the pattern is not printed successfully, refer to

“Eleven flashes” in “Handling Error Messages” in

the Quick Start Guide. When you align the print

head again, the pattern that is printed is different

from the pattern shown above.

Click Quit to exit the Canon IJ Printer Utility.

6Windows®Printer Driver Installation and Print Head Alignment 6Macintosh®Printer Driver Installation and Print Head Alignment

Column

For the Best Print Result

To maintain optimal print quality, press the

RESUME/CANCEL button on the printer about once

a week to shake the ink tanks.

NOTE: For details, refer to “Shaking the Ink

Tanks Periodically”in the Quick Start

Guide.

Introduction to the Front

Paper Feeding

You can load paper in both the Auto Sheet Feeder

and the Front Tray.

Loading paper in the Front Tray to print on large

size paper or to print on thick paper such as art

paper.

IMPORTANT:

· When loading paper in the Front Tray, the paper

sticks out from the back of the printer. Keep a

space of 40 cm / 15.7 inches for this purpose

behind the printer.

· There are wheels on the back corners of the

printer. Lift up the front of the printer to move it

back and forth.

NOTE: For details, refer to “Loading Paper in the

Front Tray” in “Loading Paper” in the Quick Start

Guide.

Front Tray

40 cm / 15.7 inches

behind the Printer

Part no. QT5-0144-V02 © 2007 Canon Inc. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Macintosh and Mac are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

Adobe and Adobe Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Specifications subject to change without notice. Printed in Japan.