Instrukcja obsługi Canon PIXMA MG5720

Canon drukarka PIXMA MG5720

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Canon PIXMA MG5720 (4 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
1
2
3
4
5
XXXXXXXX © CANON INC. 2015
a
b
CD-ROM (Windows)
1
3
2
5
3
4
6
7
5
1
6
7
3
1
4 2
2
3
2
45
4
1
b
b
a
a
b
b
b
a
a
b
b
b
b
b
a
b
a
a
b
b
a
a
(A)
1
a
a
a
ES
EN
ES
ES
ES
ES
ES
ES
ES
ES
ES
EN
EN
EN
EN
EN
EN
EN
EN
EN
ES
ES
EN
EN
ES
ES
ES
EN
EN
EN
ES
EN
ES
EN
ES
EN
Manuales
ESPAÑOL
Guía de inicio 1
Retire la cinta y los materiales de protección del exterior de la impresora.
Retire la cinta naranja y el material de protección.
Retire el envoltorio protector.
Compruebe que todas las lámparas están encendidas.
Tire del cassette hasta que se detenga.
Quite la tapa naranja.
Encienda la impresora.
No conecte aún un cable USB.
Introduzca y empuje hacia abajo el depósito de tinta
rmemente hasta que encaje en su sitio.
Cargue papel con el lado de impresión hacia abajo.
También se puede cargar papel tamaño Carta.
Utilice el botón izquierdo o Función (Function)
derecho para seleccionar una de las dos opciones.
Empuje el cassette hacia dentro hasta que y ] [
estén alineados.
No presione la guía del papel demasiado contra el
borde del papel, p1-ya que el papel puede atascarse.
Si imprime con la bandeja de salida del papel (A)
cerrada, provocará un error.
Si aparece un mensaje de error, asegúrese de que los
depósitos de tinta están instalados correctamente.
Parte posterior
¡No toque esta pieza hasta que se detenga!
Lentamente.
Retire totalmente la cinta naranja.
Tutoriales en vídeo
Conguración
Manuals
ENGLISH
Getting Started 1
Remove the tape and packing materials from outside the printer.
Remove the orange tape and protective material.
Remove the protective wrap.
Check that all lamps are lit.
Pull out the cassette until it stops.
Pull off the orange cap.
Turn on the printer.
Do not connect a USB cable yet.
Insert and push down the ink tank rmly until it snaps
into place.
Load paper with the print side facing down.
Letter size paper can also be loaded.
Use the left or right button to select one of Function
the two options.
Push in the cassette until and line up.] [
Do not press the paper guide too tightly against the
edge of the paper, or the paper may jam.
Printing with the paper output tray (A) closed, causes an
error.
If an error message appears, make sure the ink tanks
are installed correctly.
Back
Do not touch this part until it stops!
Slowly.
Remove the orange tape completely.
Video Tutorials
Setup
QT6-0650-V01 PRINTED IN XXXXXXXX
RMC (Regulatory Model Code): K10426
6 7
Windows PC
b
a
2
3
1
b
2
3
1
2
a
b
USB
3
b
4
5
b
6
a
b
b
b
b
AirPrint/Google Cloud Print
a
b
Google Cloud Print
a
a
a
a
a
a
ES
EN
ES
ES
EN
EN
ES
EN
ES
EN
ES
EN
ES
ES
EN
EN
ES
EN
ES
EN
ES
EN
ES
ES
EN
EN
ES
EN
ES
ES
ES
EN
EN
EN
Escanee el patrón impreso para la Alineación de los
cabezales de impresión (Print Head Alignment).
Siga las instrucciones que aparezcan en pantalla.
Se puede acceder al desde el sitio web.Manual en línea
La impresora se p2-ha congurado y está lista para su uso.
Para conectar la impresora a un PC, teléfono
inteligente o tableta
Use la impresora sin conectarla a ninn otro dispositivo
Utilice el botón o para seleccionar un tipo { }
de conexión entre los métodos que se muestran a
continuación.
Pulse el botón .OK
LAN
inalámbrica
Método de conexión
Conexión LAN inalámbrica Conexión USB
Asegúrese de que aparezca la siguiente pantalla.
Para usar solo AirPrint o Google Cloud Print, vaya a "AirPrint/
Google Cloud Print".
Conexión LAN inalámbrica
Conexión USB
Siga los pasos de la para realizar las Guía de inicio 2
conexiones e instalar el software y después continúe con la
conguración de la impresora.
Utilice los botones o para seleccionar { } No
conectar (Do not connect).
Pulse el botón .OK
Guía de inicio 2
Pulse el botón .Parar (Stop)
Siga las instrucciones que aparezcan en pantalla.
Si aparece la pantalla anterior, se p2-ha completado la conguración de
la impresora.
Scan the printed pattern for the Print Head Alignment.
Follow the on-screen instructions.
The is accessible from the website.Online Manual
The printer is set up and ready for use.
To connect the printer to a PC, smartphone or tablet Use the printer without connecting any other devices
Use the or button to select a connection type { }
from "Connection method" shown below.
Press the button.OK
Wireless LAN
Connection method
Wireless LAN connection USB connection
Make sure the following screen appears.
To use only AirPrint or Google Cloud Print, proceed to "AirPrint/
Google Cloud Print".
Wireless LAN connection
USB connection
Follow the steps in the to make Getting Started 2
connections and install software, and then continue the
printer setup.
Use the or button to select .{ } Do not connect
Press the button.OK
Getting Started 2
Press the button.Stop
Follow the on-screen instructions.
If the screen above appears, the printer setup is complete.
XXXXXXXX © CANON INC. 2015
2
ESPAÑOL
1.Downloadsetuple. 2. Select connection method.
Select a printer connection method and click .Next
Follow the on-screen instructions to proceed the
setting.
When the screen below appears, the printer is
ready to use.
Click to continue installing the software.Next
3. Install software.
When the screen below appears, select the
software you want to install and click .Next
Follow the on-screen instructions to proceed the
setting.
Now your computer is connected to
printer.
a Access the following URL in your web browser. Windows PC users: you can also
open the le from the setup CD-
ROM.
The screen in will appear when h
you open the le from the CD-
ROM. Perform the remaining steps
in the same way as on the website.
Select the same method as you did in
Getting Started 1.
Wireless LAN Connection
Connect the printer to your computer without
any cables.
USB Connection
Connect the printer to your computer with a
USB cable. This is the easiest way. You only
can connect one printer.
* Prepare a USB cable separately.
b Click Set Up.
c Select the region where you purchased the product.
d Select your product.
e Click Connecting to Computer, Smartphone or Tablet.
f Select your operating system.
g Click Download to download the setup le.
* If a download security warning appears, allow your web
browser to continue downloading.
h Open the downloaded le and click Start Setup.
i Follow the on-screen instructions to proceed the setup.
You can connect the printer to a PC/smartphone/tablet and install software.
Have you nished all the steps in the Getting Started 1?
Please read this manual after completing the printer setup in the
Getting Started 1.
NOTE
ENGLISH Using wireless router
Not using/having wireless router
Proceed to connect printer to Using wireless router
Not using/having wireless router
(Connecting printer to device directly)
* If you connect your device to the printer directly, you may be unable to access the Internet
with your device or may be charged for an Internet connection.
Turn on Wi-Fi on your smartphone or tablet before you start.
2.Checkyournetworkconguration.
1. Install Canon PRINT Inkjet/SELPHY to your
smartphone/tablet.
Proceed to right side.
Smartphone or
Tablet
PC
* This procedure is described based on Canon PRINT Inkjet/SELPHY 2.0.0. In other versions, follow
the application instructions to complete the setup.
: Search "Canon PRINT" in App Store.
: Search "Canon PRINT" in Google Play.
Or access the website by scanning the code on the right.
Getting Started 2
a Tap Settings
on the home
screen.
a Tap Settings
on the home
screen.
c Tap PRINT you
have installed.
c Tap PRINT you
have installed.
b Tap Canon_ij_XXXX on the Wi-Fi setting.
b Tap Canon_ij_XXXX on the Wi-Fi setting.
If does not appear on the list, see NOTE Canon_ij_XXXX
to setup the printer and wait until appears.Canon_ij_XXXX
XXXX varies depending on your printer.
The extended
survey screen
appears on the
rst startup.
The extended
survey screen
appears on the
rst startup.
If does not appear on the list, see NOTE Canon_ij_XXXX
to setup the printer and wait until appears.Canon_ij_XXXX
XXXX varies depending on your printer.
The license
agreement screen
appears on the
rst startup.
If the screen in does b
not appear, see NOTE
to setup the printer and
wait until the screen
appears.
If none of these screens appears, see "If Select Router
screen appears".
If the printer is not
detected and an error
message appears on
the printer, press the OK
button and start over from
a.
If the printer is not detected and
an error message appears on the
printer, press the button and OK
start over from .a
d Tap the printer icon
on the top left of the
screen.
d Tap the printer icon
on the top left of the
screen.
h Tap OK.i Select the SSID of your
wireless router connected
to your device.
j When a password entry
screen appears, enter
the password for your
wireless router and tap
OK.
k Wait for a while until the
printer is detected.
l When the printer is
detected, tap your
printer's model name.
m Enter the printer name
as needed and tap
OK.
n When the printer
information appears
on the screen, the
setup is complete.
e Tap Register Printer.
e Tap Register Printer.
f Tap Printer Setup.
f Tap Printer Setup.
g Tap Connect via
wireless router
(recommended).
g Tap Direct
Connection.
j Tap Settings on
the home screen.
m Tap PRINT.h Tap OK.i Check the SSID and password
and tap .Copy Password
o Wait for a while until the
printer is detected.
n Tap Done.k Tap the same SSID as
checked in .i
l Paste the password
and tap .Join
p When the printer is detected, tap
your printer's model name.
q Enter the printer name as
needed and tap .OK
r When the printer information
appears on the screen, the
setup is complete.
If does not appear:Canon_ij_XXXX
If a message saying " " does not appear at Canon PRINT Inkjet/SELPHY Printer is not registered. Perform printer setup?
startup:
Do the following on the printer.
a Tap PRINT
you have
installed.
b Tap Yes.
Make sure the SSID
of the desired wireless
router appears and tap
Yes.
Enter the password of
the wireless router and
tap .OK
Tap . Tap .Yes OK
Do the following if this screen appears.
When the SSID of the desired wireless router
appears, tap it.
Make sure your device is connected to the
same SSID.
If the SSID of the desired wireless router does
not appear or you are not sure, tap If no target
wireless router.
If Select Router screen appears:
c d Follow the on-screen instruction. Wait for a while
until the printer is
detected.
e When the printer is
detected, tap your
printer's model name.
f Enter the printer
name as needed and
tap .OK
g When the printer
information appears
on the screen, the
setup is complete.
PC ( Mac OSWindows/ )
Smartphone/Tablet (iOS/Android)
a c d Press the OK button. Press the OK button. Go back to Canon PRINT
Inkjet/SELPHY and start over
from in a / / .
b Select Cableless setup and
press the button.OK
QT6-0659-V01 PRINTED IN XXXXXXXX


Specyfikacje produktu

Marka: Canon
Kategoria: drukarka
Model: PIXMA MG5720
Kolor produktu: Czarny
Typ kontroli: Dotyk
Wbudowany wyświetlacz: Tak
Wysokość produktu: 149.86 mm
Szerokość produktu: 457.2 mm
Głębokość produktu: 370.84 mm
Waga produktu: 6260 g
Port USB: Tak
Obsługiwane systemy operacyjne Mac: Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Typ ekranu: LCD
Długość przekątnej ekranu: 2.5 "
Pojemność pamięci wewnętrznej: - MB
Ekran dotykowy: Tak
Wi-Fi: Tak
Standardy Wi- Fi: 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Liczba portów USB 2.0: 1
Przewodowa sieć LAN: Nie
Zintegrowany czytnik kart: Nie
Obsługiwane operacyjne systemy komórkowe: Android, Windows RT, iOS
Maksymalna rozdzielczość: 4800 x 1200 DPI
Technologia druku: Atramentowa
Pozycjonowanie na rynku: Dom i biuro
Prędkość drukowania (A4/US Letter, w czerni, tryb normal): - stron/min
Drukowanie: Drukowanie w kolorze
Liczba wkładów drukujących: 5
Głębokość koloru wejścia: 48 bit
Typ skanera: Skaner Płaski
Technologia skanowania: CIS
Skanowanie: Skanowanie w kolorze
Rozmiary nośników bez brzegu nadających się do druku: 4x6, 5x7, 8x10, 10x15, Legal, Letter
Rozmiary kopert: 10
Typy nośników podajnika papieru: Envelopes, Glossy paper, Matte paper, Plain paper, Semi-glossy paper
Rozmiary nośników non-ISO: Prawny
Kopiowanie: Kopiowanie w kolorze
Średni zużycie enegrii (podczas pracy ): - W
Fax: Nie
Podwójne drukowanie: Tak
Rozdzielczość wydruku w czerni: 600 x 600 DPI
Tryby druku duplex: Automatyczna
Prędkość druku (ISO / IEC 24734), mono: 12.6 ipm
Prędkość druku (ISO / IEC 24734), kolor: 9 ipm
Maksymalna rozdzielczość kopiowania: 19200 x 19200 DPI
Funkcja n w jednym (N=): 2, 4
Optyczna rozdzielczość skanowania: 1200 x 2400 DPI
Maksymalna rozdzielczość skanowania: 19200 x 19200 DPI
Maksymalny obszar skanowania: 215.9 x 297 mm
Głębokość koloru wyjścia: 24 bit
Całkowita pojemność wejściowa: 100 ark.
Całkowita pojemność wyjściowa: 100 ark.
Rozmiary papieru fotograficznego: 10x15, 13x18, 20x25 cm
Zalecana ilość stron drukuwanych miesięcznie: - stron/mies.
Drukowanie DVD/CD: Tak
Standardowe interfejsy: USB, Wireless LAN
Technologie mobilnego wydruku: Apple AirPrint, Google Cloud Print, PIXMA Cloud Link
Pictbridge: Tak
Czas uzyskania pierwszej kopi (kolor, normalny): 20 s

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Canon PIXMA MG5720, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje drukarka Canon

Instrukcje drukarka

Najnowsze instrukcje dla drukarka