Instrukcja obsługi Canon imagePROGRAF iPF710

Canon drukarka imagePROGRAF iPF710

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Canon imagePROGRAF iPF710 (1 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/1

Operation Guide 5490

Speciﬁ cations

Accuracy: ±20 seconds average per month

Stopwatch: Measuring Capacity: 9'59" (10 minutes)

Measuring Unit: 1 second

Measurements: Elapsed time; split time; two ﬁ nishes

Battery: One silver oxide battery (Type: SR920SW)

Battery Life: Approximately 3 years

Perform the following procedure if the stopwatch hands do not return to their 0 (zero)

positions when you reset the stopwatch.

Correcting the 0 Positions of the Hands

Pull the out to Click 2. Crown

Use (clockwise) and (counterclockwise) to move the A B

Stopwatch Second Hand to 12 o’clock and the Stopwatch Minute Hand

to 0.

x Holding down either button will move the second hand at high speed, until you

release the button.

x The Stopwatch Minute Hand is syncronized with the Stopwatch Second Hand .

After all of the hands are the way you want, push the Crown back in.

Important!

x Timekeeping stops while the crown is pulled out. Correct the current time setting

after performing the above operation.

Using the Stopwatch

Important!

x Do not operate the stopwatch with the crown pulled out.

Note

x An elapsed time operation will stop automatically at the end of 10 minutes.

The stopwatch measures elapsed time in 1-second increments up to 9minutes,

59seconds.

Elapsed time

A A A A B

Start Stop Resume Stop Reset

Split time

A B B A B

Start Split Split release Stop Reset

Two ﬁ nishes

A B A B B

Start Split

First runner

ﬁ nishes.

Display time of

ﬁ rst runner.

Stop

Second runner

ﬁ nishes.

Split release

Display time of

second runner.

Reset

To change the day indicator setting

To adjust the time setting

Pull the out to Click 1. Crown

Push the back in. Crown

Rotate the to change the Crown

time setting.

When the second hand is at

12 o’clock, pull the Crown out to

Click 2.

Rotate the towards you to Crown

set the day.

Note

x Take care that you set the correct AM

or PM time.

x When changing the time, move the

minute hand four or ﬁ ve minutes past

your ﬁ nal setting, and then back it up

to the setting you want.

Note

x The day indicator setting uses a 31-

day month. Make adjustments for

months of shorter lengths.

x Avoid changing the day indicator

setting between the hours of 9

p.m. and 1 a.m. Otherwise, the day

indicator may not change correctly at

midnight.

Stopwatch functions

Crown Operations

Some water-resistant models (100 meters, 200 meters)

have a screw-in crown. When you need to perform a crown

operation, rotate it towards you to unscrew it. Then pull

the crown out. Avoid applying undue force when pulling.

The watch loses its water resistance while the crown is

unscrewed. After performing a crown operation, fully screw

the crown back in.

Crown

Loosen

If your watch has a rotary bezel...

You can rotate the bezel to align its ▼ mark with the

minute hand. Then you will be able to tell how much

time has elapsed since aligning the ▼ mark.

Start

Elapsed time

Current

x Your watch may differ somewhat from the one shown in the illustration.

x Some models may use a combination of hands and rotating disks to indicate

information. The word “hand” in this section is used to mean both analog hands

and rotating disks.

Click 2

Click 1

Day Indicator

24 Hour Hand

Second Hand

Hour Hand

Minute Hand

Stopwatch Second Hand

Stopwatch Minute Hand

Crown

Specyfikacje produktu

Marka:	Canon
Kategoria:	drukarka
Model:	imagePROGRAF iPF710
Wbudowany wyświetlacz:	Tak
Waga produktu:	64000 g
Port USB:	Tak
Zgodny z Mac:	Tak
Typ ekranu:	LCD
Zakres temperatur (eksploatacja):	15 - 30 °C
Zakres wilgotności względnej:	10 - 80 %
Pobór mocy w trybie czuwania:	1 W
Liczba portów USB 2.0:	1
Przewodowa sieć LAN:	Tak
Pobór mocy:	140 W
Maksymalna rozdzielczość:	2400 x 1200 DPI
Wymiary produktu (SxGxW):	1507 x 871 x 1094 mm
Rodzaj interfejsu sieci Ethernet:	Fast Ethernet
System operacyjny:	Windows 2000/XP/Server 2003/Vista\nMacintosh OS 9, OS X
Maksymalny obszar wydruku:	A0 (841 x 1189 mm)
Rozmiary seri A ISO (A0…A9):	A0, A1, A2, A3, A4
Rozmiary seri B ISO (B0…B9):	B1, B2, B3, B4
Poziom ciśnienia akustycznego (drukowanie):	52 dB
Zgodny ze standradami przemysłowymi:	IEEE 802.3, IEEE 802.3u
Ilość dysz głowicy drukującej:	MBK: 5120
Kolor:	Tak
Złącze USB:	USB Typu-A
Poziom mocy akustycznej (czuwanie):	35 dB
Rozmiary seri C ISO (C0…C9):	C0, C1, C2, C3, C4
Głowice drukujące:	PF-03
Rolka papieru:	Tak
Papier powlekany:	Tak
Papier błyszczący:	Tak
Papier fotograficzny:	Tak
Maksymalna szerokość nośników:	254 - 914.4
Cięte arkusze:	Tak
Maksymalna szerokość rolki:	914 mm