Instrukcja obsługi Canon Color imageCLASS MF8170c
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Canon Color imageCLASS MF8170c (176 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/176
Color
imageCLASS
MF8170c
Basic Guide
Manuals for the Machine
The manuals for this machine are divided as follows. Please refer to them for detailed information.
Depending on the system configuration and product purchased, some manuals may not be needed.
Guides with this symbol are printed manuals.
CD-ROM
Guides with this symbol are PDF manuals included on the
accompanying CD-ROM. (See footnote.)
•Setting Up the Machine Set-Up Instructions
for the Machine
•Software Installation
•Network Settings Set-Up Instructions
for Networking and Printing
•Copying and Printing Instructions
•Troubleshooting Basic Guide
(This Manual)
•Fax Instructions
•Troubleshooting Facsimile Guide
•Software Installation and Instructions
•Printing and Scanning Instructions
•Troubleshooting
Software Guide
CD-ROM
•Remote User Interface Instructions Remote UI Guide
CD-ROM
•Network Connectivity and Setup Instructions Network Guide
CD-ROM
Model Name
• H12297 (Color imageCLASS MF8170c)
•The machine illustration on the cover may differ slightly from your machine.
•To view the manual in PDF format, Adobe Reader/Acrobat Reader/Acrobat is required. If Adobe Reader/Acrobat Reader/Acrobat is not installed on
your system, please download it from the Adobe Systems Incorporated website (http://www.adobe.com).
How This Manual Is Organized
Introduction
Paper Handling
Document Handling
Printing from Your Computer
Copying
Scanning
System Monitor
Maintenance
Troubleshooting
Machine Settings
Appendix
Includes the specifications of this machine and the index.
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Chapter 10
Chapter 11
Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However, as we are constantly improving our
products, if you need an exact specification, please contact Canon.
iv
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
How to Use This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
Symbols Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
Keys Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
Messages Displayed in the LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Legal Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
FCC (Federal Communications Commission) . . . . . . . . . . . . . . . . . . . . . . . . . . x
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
CDRH Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
International Energy Star Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Legal Limitations on the Usage of Your Product and the Use of Images . . . . . xiii
About the Part Containing Mercury (Applicable Only to the USA) . . . . . . . . . . xiii
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiv
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Maintenance and Inspections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xvii
Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix
Other Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix
Chapter 1 Introduction
Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1
Main Components of the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2
Operation Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4
Standby Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5
Energy Saver Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-6
Setting the Energy Saver Mode Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-6
Restoring from the Energy Saver Mode Manually . . . . . . . . . . . . . . . . . . . . . .1-7
Chapter 2 Paper Handling
Print Media Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1
Storing Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1
Storing Color Print Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2
v
Printing Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4
Loading Paper in the Cassette. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Opening the Multi-Purpose Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
Closing the Multi-Purpose Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Loading Paper in the Multi-Purpose Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
Loading Envelopes in the Multi-Purpose Tray . . . . . . . . . . . . . . . . . . . . . . . . 2-14
Specifying the Paper Size and Type
(Common for Cassette and Multi-Purpose Tray) . . . . . . . . . . . . . . . . . . . . . .2-19
Specifying the Paper Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
Specifying the Paper Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20
Orientation of the Document and the Paper Loading. . . . . . . . . . . . . . . . . . . 2-21
Selecting the Paper Output Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-22
Paper Type and Paper Output Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22
Face Down Paper Output Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23
Face Up Paper Output Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24
Chapter 3 Document Handling
Document Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1
Problem Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Scanned Area of a Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Setting Up Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3
Placing a Document on the Platen Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Loading Documents in the ADF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
The Paper Path of the ADF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Chapter 4 Printing from Your Computer
Before Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Printing Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3
Canceling Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
Chapter 5 Copying
Documents You Can Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1
Making Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-2
Setting Enlarging/Reducing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-4
Enlarging/Reducing Using Preset Copy Ratios . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Enlarging/Reducing Using Custom Copy Ratios . . . . . . . . . . . . . . . . . . . . . . . 5-5
Improving Copied Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Adjusting the Image Quality (Resolution). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Adjusting the Exposure (Density). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Adjusting Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
vi
Adjusting Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7
Adjusting the Color Balance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7
Adjusting the Saturation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-8
Removing the Background Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-9
Special Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-10
Collate Copy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-10
When Loading Documents in the ADF. . . . . . . . . . . . . . . . . . . . . . . . . . .5-10
When Placing a Document on the Platen Glass. . . . . . . . . . . . . . . . . . . .5-11
Reserve Copy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-12
Chapter 6 Scanning
Before Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1
Scanning Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2
More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-3
Chapter 7 System Monitor
Checking the Status of the Jobs Stored in the Machine . . . . . . . . . . . . . . . . .7-1
Confirming and Deleting a Fax Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2
Confirming Transmission Results. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3
Confirming and Deleting a Copy Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3
Confirming and Deleting a Print Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-4
Confirming and Deleting a Report Job. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-5
Chapter 8 Maintenance
Periodic Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-1
Cleaning the Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-1
Cleaning the Scanning Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-2
Cleaning the ADF Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-2
Cleaning the Fusing Roller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-3
Replacing the Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-5
Replacing the Toner Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-5
Precautions for Handling Toner Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . .8-13
Storing Toner Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-14
Recycling Used Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-15
The Clean Earth Campaign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-16
THE Canon CARTRIDGE RECYCLING PROGRAM . . . . . . . . . . . . . . . . .8-16
U.S.A. PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-17
Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-17
Shipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-19
CANADA PROGRAM-CANADA PROGRAMME . . . . . . . . . . . . . . . . . . . . . .8-20
Replacing the Drum Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-22
Replacing the Drum Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-22
vii
Precautions for Handling the Drum Cartridge . . . . . . . . . . . . . . . . . . . . . . . .8-29
Storing a Drum Cartridge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-31
Condensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-31
Repacking and Transporting Your Machine . . . . . . . . . . . . . . . . . . . . . . . . . .8-32
Carrying the Machine by the Sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-33
Chapter 9 Troubleshooting
Clearing Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
Paper Jam Inside the Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
Paper Jam Behind the Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-9
Paper Jam in the Drum Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-18
Removing Jammed Paper from the ADF . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-20
LCD Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-22
Paper Feeding Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-26
Copying Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-29
Print Quality Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-30
Printing Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-34
Scanning Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-35
General Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-36
If You Cannot Solve the Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-37
Chapter 10 Machine Settings
Accessing the Machine Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-1
Menu Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-2
PAPER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
COMMON SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
COPY SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6
PRINTER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-7
TIMER SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-8
MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-9
Chapter 11 Appendix
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-1
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-3
viii
Preface
Thank you for purchasing Canon Color imageCLASS MF8170c. Please read this manual
thoroughly before operating the machine in order to familiarize yourself with its capabilities,
and to make the most of its many functions. After reading this manual, store it in a safe place
for future reference.
How to Use This Manual
Symbols Used in This Manual
The following symbols are used in this manual to explain procedures, restrictions,
handling precautions, and instructions that should be observed for safety.
WARNING Indicates a warning concerning operations that may lead to death or
injury to persons if not performed correctly. In order to use the machine
safely, always pay attention to these warnings.
CAUTION Indicates a caution concerning operations that may lead to injury to
persons, or damage to property if not performed correctly. In order to use
the machine safely, always pay attention to these cautions.
IMPORTANT Indicates operational requirements and restrictions. Be sure to read
these items carefully in order to operate the machine correctly, and to
avoid damage to the machine.
NOTE Indicates a clarification of an operation, or contains additional
explanations for a procedure. Reading these notes is highly
recommended.
Keys Used in This Manual
The following symbols and key names are a few examples of how keys to be
pressed are expressed in this manual. The operation panel keys on the machine
are indicated within brackets.
Press [Color Start].
Press [Image Quality].
Image
Quality
ix
Messages Displayed in the LCD
The following are a few examples of how messages in the LCD are expressed in
this manual. The messages are indicated within angle brackets.
•If <MEMORY FULL> is displayed, the machine cannot scan the documents.
•<COL.> appears in the LCD.
x
Legal Notices
FCC (Federal Communications Commission)
Color imageCLASS MF8170c: Model H12297
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part
15 of the FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise
specified in this manual. If such changes or modifications should be made, you
could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
TEL No. (516) 328-5600
xi
IMPORTANT
•
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
•
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur
le matériel brouilleur du Canada.
Laser Safety
This product complies with 21 CFR Chapter 1 Subchapter J as a Class I laser
product under the U.S. Department of Health and Human Services (DHHS)
Radiation Performance Standard according to the Radiation Control for Health and
Safety Act of 1968. Class I levels of laser radiation are not considered to be
hazardous.
Since radiation emitted inside the product is completely confined within protective
housings and external covers, the laser beam cannot escape from the machine
during any phase of user operation. Do not remove protective housings or external
covers, except as directed by this manual.
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976.
These regulations apply to laser products manufactured from August 1, 1976.
Compliance is mandatory for products marketed in the United States.
CAUTION
Use of controls, adjustments or performance of procedures other than those
specified in this manual may result in hazardous radiation exposure.
The label shown below is attached to the laser scanner assembly within the
product.
xiv
Important Safety Instructions
Please read these instructions thoroughly before operating the machine. As these
instructions are intended to prevent injury to the user or other persons or
destruction of property, always pay attention to these instructions. Also, since it may
result in unexpected accidents or injuries, do not perform any operation unless
otherwise specified in the manual. Improper operation or use of this machine could
result in personal injury and/or damage requiring extensive repair that may not be
covered under your Limited Warranty.
Installation
WARNING
•Do not install the machine near alcohol, paint thinner, or other flammable
substances. If flammable substances come into contact with electrical parts inside
the machine, it may result in a fire or electrical shock.
•Do not place the following items on the machine. If these items come into contact
with a high-voltage area inside the machine, it may result in a fire or electrical shock.
If these items are dropped or spilled inside the machine, immediately disconnect the
power cord from the power outlet. Then, contact Canon Authorized Service Facilities
or the Canon Customer Care Center.
- Necklaces and other metal objects
- Cups, vases, flowerpots, and other containers filled with water or liquids
CAUTION
•Do not install the machine in unstable locations, such as unsteady platforms or
inclined floors, or in locations subject to excessive vibrations, as this may cause the
machine to fall or tip over, resulting in personal injury.
•Never block the ventilation slots and louvers on the machine. These openings are
provided for proper ventilation of working parts inside the machine. Blocking these
openings can cause the machine to overheat. Never place the machine on a soft
surface, such as a sofa or rug.
xv
•Do not install the machine in the following locations:
- A damp or dusty location
- A location near water faucets or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
- A location near devices that contain magnets or generate magnetic fields, such as
speakers
•Avoid poorly ventilated locations.
During use, the machine generates ozone. However, the amount of ozone generated
is not enough to affect the human body. Nevertheless, if the machine is used for a
prolonged period of time in a poorly ventilated room, or when making a large quantity
of prints, be sure to ventilate the room to make the working environment as
comfortable as possible.
•Make sure the machine is approximately 4" (10 cm) away from walls and other
equipment for proper ventilation.
•Make sure the location is not affected by extreme temperature changes, and always
stays between 32°F and 95°F (0°C and 35°C).
•Make sure the relative humidity of the area is between 35% and 85%.
•Do not use or store the machine outdoors.
Power Supply
WARNING
•Do not damage or modify the power cord. Also, do not place heavy objects on the
power cord, or pull on or excessively bend it, as this could cause electrical damage
and result in a fire or electrical shock.
•Keep the power cord away from a heat source; failure to do this may cause the power
cord coating to melt, resulting in a fire or electrical shock.
•Do not connect or disconnect the power cord with wet hands, as this may result in
electrical shock.
•Do not connect the power cord to a multiplug power strip, as this may cause a fire or
electrical shock.
•Do not bundle up or tie the power cord in a knot, as this may result in a fire or
electrical shock.
•Insert the power plug completely into the power outlet, as failure to do so may result
in a fire or electrical shock.
•Do not use power cords other than the power cord provided, as this may result in a
fire or electrical shock.
•As a general rule, do not use extension cords. Using an extension cord may result in
a fire or electrical shock. If an extension cord must be used, however, use one rated
for voltages of 120 V AC and over, untie the cord binding, and insert the power plug
completely into the extension cord outlet to ensure a firm connection between the
power cord and the extension cord.
xvi
CAUTION
•Do not use power supplies with voltages other than those specified herein, as this
may result in a fire or electrical shock.
•Always grasp the power plug when disconnecting the power cord. Pulling on the
power cord may expose or snap the core wire, or otherwise damage the power cord. If
the power cord is damaged, this could cause current to leak, resulting in a fire or
electrical shock.
•Leave sufficient space around the power plug so that it can be unplugged easily. If
objects are placed around the power plug, you will be unable to unplug it in an
emergency.
•During electrical storms, unplug the power cord from the power outlet. Electrical
storms may cause damage to the machine and result in a fire or electrical shock.
IMPORTANT
•
If dust accumulates around the plug of the power cord when it is connected to a power outlet,
unplug the machine and wipe the plug with a clean, dry cloth.
•
Do not plug the machine into the same circuit with appliances such as an air conditioner,
television or copier. These devices generate an electrical noise, and may interfere with your
machine's operation.
•
Unplug the machine in the following conditions:
- When the power cord or plug is damaged or frayed.
- If liquid has spilled into the machine.
- If the machine has been exposed to rain or water.
- If the machine does not operate normally when you have followed the instructions in the
guides included with your machine. Adjust only those controls that are covered by the
instructions in the guides since improper adjustment of other controls may result in damage
and will often require extensive work by a qualified technician to restore the product to normal
operation.
- If the machine has been dropped or damaged.
- If the machine exhibits a distinct change in performance, indicating a need for servicing.
Handling
WARNING
•Do not attempt to disassemble or modify the machine. There are high-temperature
and high-voltage components inside the machine which may result in a fire or
electrical shock.
•If the machine makes strange noises, or gives off smoke, heat, or strange smells,
immediately disconnect the power cord from the power outlet. Then, contact Canon
Authorized Service Facilities or the Canon Customer Care Center. Continued use of
the machine in this condition may result in a fire or electrical shock.
•Do not use highly flammable sprays near the machine. If gas from these sprays
comes into contact with the electrical components inside the machine, it may result
in a fire or electrical shock.
xvii
•To avoid damage to the power cord and creating a fire hazard, always disconnect the
power cord and the interface cable when moving the machine. Otherwise, the power
cord or interface cable may be damaged, resulting in a fire or electrical shock.
•Do not drop paper clips, staples, or other metal objects inside the machine. Also, do
not spill water, liquids, or flammable substances (alcohol, benzene, paint thinner,
etc.) inside the machine. If these items come into contact with a high-voltage area
inside the machine, it may result in a fire or electrical shock. If these items are
dropped or spilled inside the machine, immediately disconnect the power cord from
the power outlet. Then, contact Canon Authorized Service Facilities or the Canon
Customer Care Center.
CAUTION
•Do not place heavy objects on the machine, as they may tip over or fall resulting in
personal injury.
•Disconnect the power cord for safety when the machine will not be used for an
extended period of time, such as during consecutive holidays.
•The laser beam can be harmful to human bodies. Since radiation emitted inside the
product is completely confined within protective housings and external covers, the
laser beam cannot escape from the machine during any phase of user operation.
Read the following remarks and instructions for safety.
•Close the platen glass cover gently to avoid catching your hand. Failing to do so may
result in personal injury.
•Do not press down hard on the platen glass cover when using the platen glass to
scan a thick book. This may damage the platen glass and/or result in personal injury.
•Do not subject the machine to strong physical shock or vibration.
•Unplug the machine before moving it.
•Do not lift the machine by any of its attachments.
•If the machine exhibits a distinct change in performance, this indicates a need for
servicing.
Maintenance and Inspections
WARNING
•When cleaning the machine, disconnect the power cord. Failure to observe these
steps may result in a fire or electrical shock.
•Disconnect the power cord from the power outlet regularly, and clean the area around
the base of the power plug's metal pins and the power outlet with a dry cloth to
ensure that all dust and grime is removed. If the power cord is connected for a long
period of time in a damp, dusty, or smoky location, dust can build up around the
power plug and become damp. This may cause a short circuit and result in a fire.
•Clean the machine using a slightly dampened cloth with a mild detergent mixed with
water. Do not use alcohol, benzene, paint thinner, or other flammable substances.
Check detergent for flammability prior to use. If flammable substances come into
contact with a high-voltage area inside the machine, it may result in a fire or electrical
shock.
xviii
•There are some areas inside the machine which are subject to high-voltages. When
removing jammed paper or when inspecting the inside of the machine, do not allow
necklaces, bracelets, or other metal objects to touch the inside of the machine, as
this may result in burns or electrical shock.
•Do not burn or throw used toner cartridges into open flames, as this may cause the
toner remaining inside the cartridge to ignite, resulting in burns or a fire.
CAUTION
•Never attempt to service this machine yourself, except as explained in this manual.
There are no user serviceable parts inside the machine. Adjust only those controls
that are covered in the operating instructions. Improper adjustment could result in
personal injury and/or damage requiring extensive repair that may not be covered
under your Limited Warranty.
•The fuser unit and its surroundings inside the machine may become hot during use.
When removing jammed paper or when inspecting the inside of the machine, do not
touch the fuser unit and its surroundings, as doing so may result in burns or
electrical shock.
•When removing jammed paper or replacing the toner cartridge, take care not to allow
the toner to come into contact with your hands or clothing, as this will dirty your
hands or clothing. If they become dirty, wash them immediately with cold water.
Washing them with warm water will set the toner, and make it impossible to remove
the toner stains.
•When removing paper which has become jammed inside the machine, remove the
jammed paper gently to prevent the toner on the paper from scattering and getting
into your eyes or mouth. If the toner gets into your eyes or mouth, wash them
immediately with cold water and immediately consult a physician.
•When loading paper or removing jammed documents or paper, take care not to cut
your hands on the edges of the documents or paper.
•When removing a used toner cartridge from the machine, remove the cartridge
carefully to prevent the toner from scattering and getting into your eyes or mouth. If
the toner gets into your eyes or mouth, wash them immediately with cold water and
immediately consult a physician.
xix
Consumables
WARNING
•Do not burn or throw used toner cartridges into open flames, as this may cause the
toner remaining inside the cartridges to ignite, resulting in burns or a fire.
•Do not store toner cartridges or copy paper in places exposed to open flames, as this
may cause the toner or paper to ignite, resulting in burns or a fire.
•When discarding used toner cartridges, put the cartridges in a bag to prevent the
toner remaining inside the cartridges from scattering, and dispose of them in a
location away from open flames.
CAUTION
Keep toner and other consumables out of the reach of small children. If these items
are ingested, consult a physician immediately.
Other Warnings
WARNING
For cardiac pacemaker users:
This product generates a low level magnetic field. If you use a cardiac pacemaker and
feel abnormalities, please move away from the product and consult a physician.
CAUTION
Follow all warnings and instructions marked on the machine.
xx
CHAPTER
Customer Support 1-1
1
Introduction
This chapter describes the main components, the operation panel and the standby display of
the machine. It also explains how to set the energy saver function.
Customer Support
Your machine is designed with the latest technology to provide trouble-free
operation. If you encounter a problem with the machine's operation, try to solve it by
using the information in Chapter 9, "Troubleshooting." If you cannot solve the
problem or if you think your machine needs servicing, contact Canon Authorized
Service Facilities or the Canon Customer Care Center at 1-800-828-4040 between
the hours of 8:00 A.M. to 8:00 P.M. EST Monday through Friday and 10:00 A.M. to
8:00 P.M. on Saturday.
Main Components of the Machine
1-2
Introduction
1
Main Components of the Machine
This section describes the main components of the machine.
Front View
aOperation panel
Controls the machine.
bADF(Auto Document Feeder)
Holds the documents and feeds them
automatically into the scanning unit.
cDocument feeder tray
Place documents.
dDocument guides
Adjust to the width of document.
eScanning platform
Lift it to access inside the machine.
fOutput tray
Outputs printouts.
gCartridge cover
Open it when you install drum and toner
cartridges, or remove jammed paper.
hFront cover
Open it when using the multi-purpose tray.
iCassette
Holds the paper supply.
g
h
i
a b c
d
e
f
Main Components of the Machine 1-3
Introduction
1
Rear View
aPlaten glass cover
Open it when you place documents on the platen
glass for copying or scanning.
bPlaten glass
Place documents.
cMulti-purpose tray
Holds the paper supply.
aUSB port
Connect the USB (Universal Serial Bus) cable.
bPower socket
Connect the power cord.
cFace up cover
Open it when you output paper face up, or
remove jammed paper.
dEthernet port
Connect the network cable.
eTelephone line jack
Connect the telephone line cable.
fExternal device jack
Connect an external device.
a
b
c
LINE EXT.
a
b
c
d
e f
Operation Panel
1-4
Introduction
1
Operation Panel
aIn Use/Memory
Lights green during copying or when the copy job
is stored in the memory.
bCOPY key
Switches the standby display to the Copy mode.
cFAX key
Switches the standby display to the Fax mode.
dSCAN key
Switches the standby display to the Scan mode.
eAlarm indicator
Flashes red when the machine has a problem
such as a paper jam. (The error message is
displayed in the LCD.)
fEnlarge/Reduce key
Sets an enlargement or reduction ratio of the
copy.
gExposure key
Adjusts the copy exposure.
hImage Quality key
Adjusts the quality of copies.
iCollate key
Sorts copies in order of pages.
jEnergy Saver key
Sets or cancels the energy saver mode manually.
The key lights green when the energy saver mode
is set, and goes off when the mode is canceled.
kPaper Select key
Selects the paper feeding location (cassette or
multi-purpose tray).
lStatus Monitor key
Checks the status of copy, fax, print and report
jobs.
mLCD
Displays messages and prompts during
operation. Also displays selections, text, and
numbers when specifying settings.
nB&W Start key
Starts B&W copying.
oColor Start key
Starts color copying.
pStop/Reset key
Cancels copying and other operations, and
returns to the standby display.
qSet key
Sets or registers the contents you select.
r ( )[ (-)] or [ (+)] keys
Scroll through the selections so you can see
other settings.
sMenu key
Customizes the way your machine operates.
tNumeric keys
Enter copy quantity and other numerical values.
Set
31 2
4 5 6
7 8
0
ABC DEF
GHI JKL MNO
PQRS
TONE
TUV WXYZ
SYMBOLS
9
01 02 03 04 05
06 07 08 09 10
o s
Coded Dial
Directory
Hook
In Use/
Memory FAX SCAN
COPY
Menu
Alarm
Exposure
Enlarge/
Reduce
Image
Quality Col ate
Ener gy Saver
Status Monitor
Paper Selcet
B&W Start Color Start Stop/Reset
t
Redia/Pause
rqpnmlk
a b c d e f g h i j
Standby Display 1-5
Introduction
1
Standby Display
The standby display differs depending on which mode is selected.
The standby display in the Copy, Scan or FAX mode is as follows:
■Copy Mode
■Scan Mode
■Fax Mode
Canon Color imageCLASS MF8170c has various fax features such as Error
Correction Mode (ECM), Automatic switching between fax and voice calls,
Answering machine connection, Memory sending/receiving, Reduced-size printing,
Automatic dialing and broadcasting, etc.
For more details about Fax functions, see the Facsimile Guide.
NOTE
When the machine is plugged in, the LCD displays <PLEASE WAIT> for several minutes,
then the standby display appears.
Copy ratio
Exposure Copy
quantity
Paper size
Image
quality
Receive mode Ima
g
e
q
ualit
y
Date & time
CHAPTER
Print Media Requirements 2-1
2
Paper Handling
This chapter describes the media you can use with this machine, how to load them, and where
the documents come out.
Print Media Requirements
Storing Paper
The quality of paper may deteriorate if it is stored improperly even when the paper
meets the normal specifications.
Deteriorated paper may cause misfeeds, paper jams, or deterioration in print
quality.
Observe the following guidelines for storing and handling paper:
IMPORTANT
•
Store paper away from moisture since paper quality deteriorates in a moist environment.
•
Paper wrappers are moisture-proof. Keep paper in the wrapper until it is ready to be used.
Store all unused paper in a wrapper.
•
Store paper on a flat surface to prevent it from creasing or curling.
•
Do not store paper on the floor where water and moisture can accumulate.
•
Avoid physical damage to stored paper.
•
Do not store a paper stack vertically or leaning on another object.
•
Avoid direct sunlight and moisture when storing paper.
•
If the paper storage room and work area differ significantly in temperature or humidity,
keep the paper in the work area for at least one day prior to printing so that it can adapt to
the new environment. When paper is moved to a location that differs significantly in
temperature or humidity, it may curl or get creased.
Print Media Requirements
2-2
Paper Handling
2
Storing Color Print Paper
When handling or storing color printouts printed by this machine, be careful of the
following points:
IMPORTANT
•
Avoid storing color prints with PVC materials such as clear folders. Toner may come off
and stick to the PVC material.
•
Use insoluble adhesive when gluing color prints. Toner may melt when insoluble
adhesive is used. Before using the adhesive, test it with paper that is no longer required.
•
Confirm that the color prints are completely dry before placing one over another. Prints
may stick if they are placed together half-dried.
•
Store color prints on a flat surface to avoid creasing or curling. Toner may peel off when
they are folded or creased.
•
Avoid storing color prints at high temperatures. Otherwise toner may melt and blot.
•
Put color prints in a binder when storing them for a long period of time (more than two
years). Color prints may discolor when they are stored for a long period of time.
■ Unacceptable Paper
Do not copy on the following types of copy stock. Doing so may result in paper
jams.
•Severely curled or wrinkled paper
•Transparencies designed for full-color copiers or printers
•Paper which has already been copied using a digital full-color copier (Do not copy
on the reverse side.)
•Paper which has been printed on using a thermal transfer printer (Do not copy on
the reverse side.)
IMPORTANT
Never attempt to make copies on full-color transparencies. Doing so may result in
machine malfunction.
■ Acceptable Paper
* Only for the multi-purpose tray.
Cassette/Multi-Purpose Tray
Paper Size A4, B5, A5, Executive, Letter, Legal, Envelope*: COM10, Monarch,
DL, ISO-C5
Paper Weight 17 lb to 34 lb (64 g/m2 to 128 g/m2)
Paper Type Plain paper, Heavy paper*, Transparency*, Envelope*
Print Media Requirements 2-3
Paper Handling
2
NOTE
•
The printing speed may become slower than usual depending on the paper size, the
paper type, and the number of sheets you specify.
This is because the machine's safety function works to prevent the failure due to heat.
•
Some types of paper may not feed properly into the cassette or the multi-purpose tray.
Printing Areas
Please note that the term "printing area" represents both the recommended area
for optimum print quality and the entire area where the machine can technically
print from your computer.
Printing area (light shade): Canon recommends that you print within this area.
■ Paper
■ Envelope
NOTE
Copying areas are a little larger than printing areas.
MAX. 13/ " (5 mm) MAX. 64 13 / " (5 mm)64
MAX. 13 / " (5 mm64
)
MAX. 13 / "64
(
5 mm
)
Feeding
direction
MAX. 13 / " (10 mm)32
MAX. 13 / " (10 mm)32
MAX. 13 / " (10 mm)MAX. 32
13 / " (10 mm)32
Feeding
direction
Loading Paper 2-5
Paper Handling
2
2
Push down the plate of the paper cassette to lock it.
CAUTION
Do not touch the lock release levers located on the right and left sides of the
paper cassette when the plate of the paper cassette is locked. The plate may
snap forcefully if the lock is released and may result in personal injuries.
3
Hold the lock release lever of the rear paper guide and slide the
guide to the mark indicating the subject paper size.
The paper size indicated on the paper guide should be aligned with the mark.
Lock release lever
Lock release lever
Loading Paper 2-11
Paper Handling
2
3
Open the extension tray when loading long-size paper such as A4.
Closing the Multi-Purpose Tray
Close the multi-purpose tray using the following procedure. Keep the multi-purpose
tray closed when it is not used.
1
Remove any loaded paper, close the extension tray, and then put
the auxiliary tray back to the original position.
2
Close the multi-purpose tray.
Loading Paper 2-15
Paper Handling
2
1
Open the multi-purpose tray and pull out the auxiliary tray.
For opening the multi-purpose tray, see "Opening the Multi-Purpose Tray," on p. 2-10.
2
Spread the paper guides a little wider than the actual envelope
width.
3
Place the stack of envelopes on a flat surface, flatten them to
release any remaining air, and be sure that the edges are pressed
tightly.
CAUTION
Be careful not to cut your hands with the edges of the envelopes.
Specyfikacje produktu
| Marka: | Canon |
| Kategoria: | drukarka |
| Model: | Color imageCLASS MF8170c |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Canon Color imageCLASS MF8170c, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje drukarka Canon
9 Kwietnia 2025
4 Kwietnia 2025
4 Marca 2025
3 Marca 2025
1 Marca 2025
13 Lutego 2025
8 Lutego 2025
2 Lutego 2025
18 Stycznia 2025
18 Stycznia 2025
Instrukcje drukarka
- drukarka Sony
- drukarka Samsung
- drukarka LG
- drukarka Xiaomi
- drukarka Sharp
- drukarka Huawei
- drukarka Lenovo
- drukarka Epson
- drukarka Fujitsu
- drukarka Roland
- drukarka Panasonic
- drukarka StarTech.com
- drukarka Fujifilm
- drukarka MSI
- drukarka Toshiba
- drukarka D-Link
- drukarka Citizen
- drukarka HP
- drukarka Brother
- drukarka Honeywell
- drukarka Kodak
- drukarka Testo
- drukarka Primera
- drukarka Xerox
- drukarka Godex
- drukarka Olivetti
- drukarka Zebra
- drukarka Dell
- drukarka Digitus
- drukarka AgfaPhoto
- drukarka Kyocera
- drukarka Ricoh
- drukarka Seiko
- drukarka Renkforce
- drukarka Thomson
- drukarka AVM
- drukarka Velleman
- drukarka Dymo
- drukarka Panduit
- drukarka Olympus
- drukarka OKI
- drukarka Mitsubishi
- drukarka Intermec
- drukarka NEC
- drukarka Polaroid
- drukarka Konica Minolta
- drukarka Bixolon
- drukarka Pantum
- drukarka Olympia
- drukarka Datamax O'Neil
- drukarka DNP
- drukarka Equip
- drukarka ZKTeco
- drukarka TSC
- drukarka HiTi
- drukarka Microboards
- drukarka Triumph-Adler
- drukarka Fargo
- drukarka Entrust
- drukarka Kern
- drukarka Brady
- drukarka Tomy
- drukarka Lexmark
- drukarka Sagem
- drukarka Nilox
- drukarka Argox
- drukarka Royal Sovereign
- drukarka Minolta
- drukarka Oce
- drukarka Paxar
- drukarka IDP
- drukarka Metapace
- drukarka Ultimaker
- drukarka Ibm
- drukarka CSL
- drukarka Toshiba TEC
- drukarka Frama
- drukarka Builder
- drukarka Kogan
- drukarka Star Micronics
- drukarka Posiflex
- drukarka Dascom
- drukarka GG Image
- drukarka Vupoint Solutions
- drukarka Elite Screens
- drukarka DTRONIC
- drukarka Phoenix Contact
- drukarka Videology
- drukarka Epson 7620
- drukarka Star
- drukarka EC Line
- drukarka Colop
- drukarka Approx
- drukarka Fichero
- drukarka Raspberry Pi
- drukarka Unitech
- drukarka Middle Atlantic
- drukarka Evolis
- drukarka Tally Dascom
- drukarka Custom
- drukarka Nisca
- drukarka Sawgrass
- drukarka Mutoh
Najnowsze instrukcje dla drukarka
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025