Instrukcja obsługi Candy CS V10LG-80

Candy Suszarka bębnowa CS V10LG-80

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Candy CS V10LG-80 (9 stron) w kategorii Suszarka bębnowa. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/9

OPERATION

Do not open the door during the automatic

programs in order to obtain a proper drying.

1. Open the door and load the drum with

laundry. Ensure that garments do not

hinder closure of the door.

2. Gently close the door pushing it slowly

until you hear the door 'click' shut.

3. Turn the Programme Selector dial to

select the required drying programme (see

Programme Guide).

4. Press the button. The dryer will start

automatically and the indicator above the

button will be continuously lit.

5. If the door is opened during the

programme to check the laundry, it is

necessary to press to recommence

drying after the door has been closed.

6. When the cycle is nearing completion

the machine will enter the cool down

phase, the clothes will be tumbled in cool

air allowing the load to cool down.

7. Following the completion of the cycle the

drum will rotate intermittently to minimize

creasing. This will continue until the

machine is switched OFF or the door is

opened.

DOOR and FILTER

Pull on handle to open the door.

To restart the dryer, close the door and press

Start / Pause button.

WARNING! When the tumble dryer is in

use the drum and door may be VERY HOT.

Filter

IMPORTANT: To maintain the efficiency of

the dryer check that the fluff filter is clean

before each drying cycle.

1.P u l l t h e f i l t e r

upwards.

2.Open filter as shown.

3.Gently remove lint

using a soft brush or

your fingertips.

4.S n a p t h e f i lt e r

together and push

back into place.

Filter Care Indicator

Lights when the filter needs cleaning.

If the laundry is not drying check that the filter

is not clogged.

IF YOU CLEAN FILTER UNDER

WATER, REMEMBER TO DRY IT.

Clean the ﬁlters before every cycle

CONTROLS AND

INDICATORS

- Dry wardrobe : For laundry that can

be directly stored.

- To get completely dry Extra-dry :

garments, ideal for full load.

4.Delay Start Button

To postpone the start of the programm for

3h, 6h, or 9h. Opening of the porthole with

delayed start set, after re-closing the

porthole, press start againg to resume

the counting.

C- Led

Filter cleaning - It lights up when the

cleaning of the filters is requested.

These control lights, light up for indicate

the drying phase:

-DRY:

It lights up when the drying cycle is

running.

- It light up when the cycle is in the

cooling phase.

- : It light up when the cycle is done.END

1234

A-Programme Selector -

Rotating the knob in both directions it's

possible to select the desired drying

program. To switch or cancel off the dryer

rotate the knob on OFF.

B-Buttons -

1.Start/Pause Button

To start the selected program and/or

suspend it.

2.Time cycle selection

3.Drying Selection Button

It allows to set the desired dryness level

editable option up to 5 minutes after the

starting of the cycle:

- Ready to Iron : It leaves the garments

slightly wet to facilitate ironing.

- To get garment ready to Dry Hanger :

be hang.

D-

SMART TOUCH area -

Pressing the START/PAUSE button

allows to a previously downloaded cycle

to start whilst the T position is ouch

selected on the programme knob (for

downloading cycles from the App see the

relevant section of this user manual).

It's possible switch a cycle from automatic to

timed , up to 3 minutes after the start of the

cycle. After this selection to reset the

automatic

drying

functioning is necessary to

switch

off the dryer.In case of incompatibility,

all LEDs flash quickly for 3 times.

This appliances is equipped with Drying

Manager Function. On automatic cycles,

each level of intermediate drying, prior to

reaching the selected one, is

indicated by flashing the light indicator

corresponding to the degree of drying

the

reached.

flash quickly for 3 times.

In case of incompatibility,all LEDs

Specyfikacje produktu

Marka:	Candy
Kategoria:	Suszarka bębnowa
Model:	CS V10LG-80

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Candy CS V10LG-80, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Suszarka bębnowa Candy

Candy GCS 91013A2 Instrukcja

15 Stycznia 2025

Candy CSOE V10DRFR-ZA Instrukcja

5 Stycznia 2025

Candy CROE H9A2TBE-S Instrukcja

23 Grudnia 2024

Candy CSE C8LG-47 Instrukcja

22 Grudnia 2024

Candy CSE C10LG-47 Instrukcja

22 Grudnia 2024

Candy CSOE H8A2DE-47 Instrukcja

22 Grudnia 2024

Candy CSOEH10A2TREX-47 Instrukcja

21 Grudnia 2024

Candy CSOE H9A2DBE-47 Instrukcja

21 Grudnia 2024

Candy CSE H9A2DE-47 Instrukcja

21 Grudnia 2024

Candy CSOEH10A2DBEX-47 Instrukcja

21 Grudnia 2024

Instrukcje Suszarka bębnowa

Najnowsze instrukcje dla Suszarka bębnowa

Pitsos WTP704D8 Instrukcja

22 Marca 2025

Bosch WQG2420WFG Instrukcja

21 Marca 2025

Profilo KM8612HTR Instrukcja

21 Marca 2025

Whirlpool AWZ 7777 Instrukcja

14 Marca 2025

Whirlpool awz 8468 Instrukcja

13 Marca 2025

Profilo KM9611CTR Instrukcja

13 Marca 2025

Bosch WQG241001 Instrukcja

13 Marca 2025

Castor CCD 230RE Instrukcja

13 Marca 2025

Whirlpool awz 9816 Instrukcja

13 Marca 2025

Creda 5 KG Instrukcja

12 Marca 2025