Instrukcja obsługi Camille Bauer SIRAX BT5400

Camille Bauer Niesklasyfikowane SIRAX BT5400

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Camille Bauer SIRAX BT5400 (36 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/36

Camille Bauer Metrawatt AG

Aargauerstrasse 7

CH-5610 Wohlen/Switzerland

Tel: +41 56 618 21 11

Fax: +41 56 618 21 21

info@cbmag.com

www.camillebauer.com

Operating Instructions

SIRAX BT5400

Transducer for Active, Apparent, Reactive Power,

Phase Angle and Power Factor

PM 1000291 000 00 Device handbook SIRAX BT5400 2/36

Legal information

Warning notices

In this document warning notices are used, which you have to observe to ensure personal safety and to prevent damage to property. Depending

on the degree of danger the following symbols are used:

Qualiﬁ ed personnel

The product described in this document may be handled by personnel only, which is qualiﬁ ed for the respective task. Qualiﬁ ed personnel have

the training and experience to identify risks and potential hazards when working with the product. Qualiﬁ ed personnel are also able to understand

and follow the given safety and warning notices.

Intended use

The product described in this document may be used only for the application speciﬁ ed. The maximum electrical supply data and ambient con-

ditions speciﬁ ed in the technical data section must be adhered. For the perfect and safe operation of the device proper transport and storage as

well as professional assembly, installation, handling and maintenance are required.

Disclaimer of liability

The content of this document has been reviewed to ensure correctness. Nevertheless it may contain errors or inconsistencies and we cannot

guarantee completeness and correctness. This is especially true for di erent language versions of this document. This document is regularly

reviewed and updated. Necessary corrections will be included in subsequent version and are available via our webpage http://www.camillebauer.

com.

Feedback

If you detect errors in this document or if there is necessary information missing, please inform us via e-mail to:

customer-support@camillebauer.com

If the warning notice is not followed death or severe personal injury result.will

If the warning notice is not followed damage to property or severe personal injury may result.

If the warning notice is not followed the device be damaged or not fulﬁ ll the expected may may

functionality.

PM 1000291 000 00 Device handbook SIRAX BT5400 3/36

Table of content

1. Introduction ……………………………………………………………………………………………………………4

1.1 Purpose of this document ………………………………………………………………………………………………4

1.2 Scope of supply …………………………………………………………………………………………………………4

1.3 Further documents ………………………………………………………………………………………………………4

2. Safety notes ……………………………………………………………………………………………………………4

3. Device overview ……………………………………………………………………………………………………………5

4. Mechanical mounting ………………………………………………………………………………………………………5

4.1 Mounting ……………………………………………………………………………………………………………5

4.2 Demounting of the device ………………………………………………………………………………………………5

5. Electrical connections ……………………………………………………………………………………………………6

5.1 General safety notes ……………………………………………………………………………………………………6

5.2 Cross sections and tightening torques ……………………………………………………………………………………6

5.3 Inputs ……………………………………………………………………………………………………………6

5.4 Power supply …………………………………………………………………………………………………………7

5.5 Connection Diagram ……………………………………………………………………………………………………8

5.6 Modbus interface RS485 …………………………………………………………………………………………………8

6. Commissioning ……………………………………………………………………………………………………………8

6.1 Operating the device …………………………………………………………………………………………………9

6.2 LED indication …………………………………………………………………………………………………………9

6.3 Input and output screens ………………………………………………………………………………………………9

7. Programming ………………………………………………………………………………………………………… 10

7.1 Programming via Front LCD & Two keys ………………………………………………………………………………… 10

7.1.1. Password Protection …………………………………………………………………………………………… 10

7.1.1.1 Password Veriﬁ cation …………………………………………………………………………………… 10

7.1.1.2 Editing Existing Password ………………………………………………………………………………… 11

7.1.2 Transducer Type Selection …………………………………………………………………………………… 12

7.1.3 System Type Selection ………………………………………………………………………………………… 12

7.1.4 Output Type Selection ………………………………………………………………………………………… 12

7.1.4.1 Output 1 Type Selection ………………………………………………………………………………… 12

7.1.4.2 Output 2 Type Selection ………………………………………………………………………………… 13

7.1.5 Potential Transformer Parameter Setting ………………………………………………………………………… 13

7.1.5.1 Potential Transformer primary value ……………………………………………………………………… 13

7.1.5.2 Potential Transformer Secondary Value …………………………………………………………………… 14

7.1.6 Current Transformer Parameter Setting ………………………………………………………………………… 15

7.1.6.1 Current Transformer Primary Value ………………………………………………………………………… 15

7.1.6.2 Current Transformer Secondary Value ……………………………………………………………………… 16

7.1.7 Communication Parameter Setting ……………………………………………………………………………… 17

7.1.7.1 Address Setting ………………………………………………………………………………………… 17

7.1.7.2 RS 485 Baud rate ……………………………………………………………………………………… 17

7.1.7.3 RS 485 Parity Selection ………………………………………………………………………………… 18

7.1.8 Input Characteristics Setting …………………………………………………………………………………… 18

7.1.8.1 End value of Input ……………………………………………………………………………………… 18

7.1.9 Output Characteristics Setting …………………………………………………………………………………… 21

7.1.9.1 Output 1 Characteristics Setting ………………………………………………………………………… 21

7.1.9.1.1 End value of output 1 ……………………………………………………………………………… 21

7.1.9.1.2 Start value of output 1 ……………………………………………………………………………… 22

7.1.9.1.3 Elbow value of output 1 ……………………………………………………………………………… 23

7.1.9.2 Output 2 Characteristics Setting ………………………………………………………………………… 24

7.1.9.2.1 End value of output 2 ……………………………………………………………………………… 24

7.1.9.2.2 Start value of output 2 ……………………………………………………………………………… 24

7.1.9.2.3 Elbow value of output 2 ……………………………………………………………………………… 25

7.1.10 Mode Selection ……………………………………………………………………………………………… 26

8. Phasor Diagram ………………………………………………………………………………………………………… 28

9. Programming via the programming connection and the PRKAB5000 programming cable ……………………………… 29

9.1. Programming via the RS485 (Modbus) interface ……………………………………………………………………… 29

9.2. DIP Switch Setting for Output ………………………………………………………………………………………… 29

Specyfikacje produktu

Marka:	Camille Bauer
Kategoria:	Niesklasyfikowane
Model:	SIRAX BT5400

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Camille Bauer SIRAX BT5400, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Camille Bauer

Camille Bauer Sineax V624 Instrukcja

1 Października 2024

Camille Bauer Sineax I552 Instrukcja

1 Października 2024

Camille Bauer Sineax M561 Instrukcja

1 Października 2024

Camille Bauer Sineax TI802 Instrukcja

1 Października 2024

Camille Bauer Sineax I542 Instrukcja

1 Października 2024

Camille Bauer Sineax VS30 Instrukcja

1 Października 2024

Camille Bauer Sineax TI801 Instrukcja

1 Października 2024

Camille Bauer Sineax U543 Instrukcja

1 Października 2024

Camille Bauer Sineax I538 Instrukcja

1 Października 2024

Camille Bauer SIRAX BT5400 Instrukcja

1 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024