Instrukcja obsługi Caliber RDD843BT

Caliber Radia samochodowe RDD843BT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Caliber RDD843BT (21 stron) w kategorii Radia samochodowe. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/21
Keep the volume level Iow enough to aware of the road and traffic
conditions.
Do not expose the product to water or excessive moisture. This could
cause electrical shorts, fire or other damage.
Warnings
When Driving
When Car Washing
To reduce the risk of fire or electric shock, do not expose this equipment
to rain or moisture.
To reduce the risk of fire or electric shock, and annoying interference,
use only the recommended accessories.
This device is intended for continuous operation.
In order to avoid any accident, the driver must not watch video
while driving. This unit is designed to not allow watching video
while driving. Park your car in a safe place and engage the
'parking brake' before watching video.
CAUTION
Parking in direct sunlight can produce very high temperatures inside your
vehicle. Give the interior a chance to cool down before starting playback.
This product is designed to operate with a 12 volt DC, negative ground
battery system (the regular system in a North American car).
Avoid inserting any foreign objects into the slot of this player. Failure to
follow this may cause malfunction or permanent damage due to the
precise mechanism of this unit.
When Parked
Use the Proper Power Supply
Protect the Disc Mechanism
THIS MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. THIS
UNIT USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD
CAUSE HAZARDOUS RADIATION IF EXPOSED DIRECTLY. BE
SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS
INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OR
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF
PLEASE REFER SERVICING TO A QUALIFIED TECHNICIAN.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. Patents and other intellectual
property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and other limited
viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
NOTE
E - 2
CAUTION
1. Before finally installing the unit, connect the wiring temporarily and
make sure it is all connected up properly and the unit and system work
properly.
2. Use only the parts included with the unit to ensure proper installation.
The use of un-authorized parts can cause mal functions.
3. Consult with your nearest dealer if install-ation requires the drilling of
holes or other modifications of the vehicle.
4. Install the unit where it does not get in the driver's way and cannot
injure the passenger if there is a sudden stop, like an emergency stop.
5. If installation angle exceeds 30° from horizontal, the unit might not give
its optimum performance.
6. Avoid installing the unit where it would be subject to high temperature,
such as from direct sunlight, or from hot air, from heater, or where it
would be subject to dust dirt or excessive vibration.
After inserting the half sleeve into the dashboard, select the appropriate
tab according to the thickness of the dashboard material and bend them
inwards to secure the holder in place.
Installation using the screw holes on the side of
the unit
Select a position where the screw holes of the bracket and the screw
holes of the main unit become aligned (are fitted) and tighten the screws
at 2 places on each side.
Screw
Screw
Factory radio
mounting
bracket
Hook
Hook
Installation
INSTALLATION CAUTION
E - 3
Installation with the half sleeve
182
111
Dashboard
Half Sleeve
Screw
Attach the trim ring
Trim ring
Dashboard or
console
The outer trim ring, and half-sleeve are not used
for this installation.
The mounting box, metal half-sleeve, hook &
screws are not included in the packing.
NOTE
Attached the Front Panel
1
2
To attach the front panel back to the
unit chassis, please insert the right side
of the panel in the chassis until it is
correctly engaged. Press the left side
of the panel until the mechanism locks
it into place.

Specyfikacje produktu

Marka: Caliber
Kategoria: Radia samochodowe
Model: RDD843BT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Caliber RDD843BT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Radia samochodowe Caliber

Caliber

Caliber RCD110B Instrukcja

13 Października 2024
Caliber

Caliber CA 160 V2 Instrukcja

12 Października 2024
Caliber

Caliber RMD213 Instrukcja

12 Października 2024
Caliber

Caliber RCD266BT Instrukcja

10 Października 2024
Caliber

Caliber RCD120BT Instrukcja

7 Października 2024
Caliber

Caliber MCD 265 Instrukcja

6 Października 2024
Caliber

Caliber CA 130 Instrukcja

3 Października 2024
Caliber

Caliber RCD120 Instrukcja

27 Września 2024
Caliber

Caliber RCD 239DAB-BT Instrukcja

24 Września 2024
Caliber

Caliber RMD 234DAB-BT Instrukcja

22 Września 2024

Instrukcje Radia samochodowe

Najnowsze instrukcje dla Radia samochodowe

JVC

JVC KD-R90BT Instrukcja

15 Października 2024
Kenwood

Kenwood KMM-X705 Instrukcja

15 Października 2024
Alpine

Alpine CDM-7870R Instrukcja

14 Października 2024
Hyundai

Hyundai H-CMD2009 Instrukcja

14 Października 2024
Dual

Dual XC4100 Instrukcja

13 Października 2024
Audiovox

Audiovox VXE 3010 Instrukcja

13 Października 2024
MB Quart

MB Quart PAB 5400 Instrukcja

13 Października 2024
Hyundai

Hyundai H-CDM8023 Instrukcja

13 Października 2024
JVC

JVC KD-X30 Instrukcja

13 Października 2024
Hyundai

Hyundai H-CDM8010 Instrukcja

13 Października 2024