Instrukcja obsługi Caliber Crossover CX 4 R

Caliber Radia samochodowe Crossover CX 4 R

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Caliber Crossover CX 4 R (13 stron) w kategorii Radia samochodowe. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/13

Thank you for choosing a Caliber product. In doing so you’ve demonstrated a

desire to own the ﬁnest in Car Audio Technology. Caliber strives to provide you

with the ﬁnest products possible, and is always looking for ways to please our

customers even more.

Properly installed, your Caliber CX4R will provide years of high quality sonic

reproduction. Before installing this 4-way crossover in your vehicle, please read

this entire manual carefully, in order to protect your vehicle, and get the maxi-

mum performance of your mobile sound system.

Caliber Warranty

Due to the complexity of our products,we strongly recommend that this 4-way

crossover is installed by your authorized Caliber dealer. If properly installed by

your dealer we provide a warranty for 12 month from the date of purchase.

If you install this 4-way crossover yourself, we wish you lots of fun and succes in

doing so. If you follow our guidelines, you’ll get the best result. Our warranty,

however, will be limited to and not exceed 30 days from the date of purchase.

Caliber Accessories

To r ealize the exceptional performance of which this 4-way crossover is capable,

it is necessary that power sources, signal sources, speakers and interconnects

are of the highest quality. Remember that Caliber is a specialized manufacturer

of all sorts of Car Audio components. We also manufacture everything needed

for the ‘optimal’ Car Audio System (except the car). So be sure to ‘Get

Connected’ with Caliber and ask your local Caliber dealer for our accessories.

Important

The quality of installation may effect the performance and reliability of a Caliber

CX4R 4-way crossover. If you have any doubts or questions regarding installation

or use, don’t hesitate to contact your ofﬁcial Caliber dealer.

A Caliber dealer is selected for his knowledge in auto sound, and has been trained

to give you great advice and service. You can always count on him to give you

advice for any technical problems and will keep you informed on the latest

products by Caliber.

We wish you lots of enjoyable moments with your newest toy.Adjust the sound

to perfection, but keep paying attention to the road whilst doing so.

BEFORE YOU START

5 Power Terminals

”+” Connect to the vehicle’s positive 12V supply (+12V DC)

”-” Connect to the vehicle’s ground (-12V DC)

”R” Connect to the head unit’s remote turn on leads.

”D/R” Delayed Remote output. Connect to all the ampliﬁers following the

CX4R.This will delay the turn on of these units by 2 seconds after the system

is powered up.

6 Remote Low Pass Level Control

Docking port for the jack of the supplied CXR Remote control.This gives

you the possibility to adjust your Low Pass Level on dash.

7-10 Output Level Controls

These allow you to adjust the output levels of all 4 different channels.

Because not all speakers (tweeters, woofers) have the same sensitivity, the

output level has to be adjusted, so the overall volume will be the same for

all speakers.

11 Band Pass Mono/Stereo Switch

This switch gives you the opportunity to set the Band Pass output in a mono

or stereo mode.This can be very usefull if you use the Band Pass output for

your rearﬁll or as a centerchannel.

12 Low Pass Phase Switch

This switch allows you to turn the phase of the Low Pass channel 0°, 90° or

180°.This option can be helpfull when your subwoofers are places further

away as the rest of your speakers.This creates signiﬁcant phase differences

which make you hardly hear any low-reproduction in the driversseat.

By turning the phase of the low pass signal, you can correct the sound level

of your Low Pass.

13 Low Pass Mono/Stereo Switch

With this switch you can choose whether to have your subwoofer(s) (Low

Pass) play in mono or stereo mode.We advice you to always let your woofers

play in mono-mode, especially when there is more than one woofer in an

enclosure.

14 Band Pass/High Pass Selector

In some installations two High Pass outputs are desirable.This selectorswitch

enables you to make a second High Pass output from the third channel.

Speciﬁcations CX4R

Frequency response 10Hz to 30KHz ±1dB

T.H.D. 0.02%

Signal to noise ratio >100dB

Channel separation >80dB

Input level -12dB to 12dB (7V to 0.2V)

Input impedance 20KΩ

Maximum output level 15V

Output impedance 50ΩBalanced

Crossover slope 24dB/Oct

Fuse rating 1A

Dimensions W x L x H (mm) 260 x 160 x 38 (mm)

Features CX4R (See illustration on the inside cover)

1 Input

Docking ports for the RCA connectors arriving from the source unit’s output.

If you choose for a two channel input, connect the RCA’s to the docking-

ports 1A, and switch the input-selector-switch( ) to the single position.1C

If you decide to use the four channel input option, connect both the RCA

dockingports 1A and 1B, and switch the input-selector-switch(1C) to the

dual position. In case you use a four channel input, you can still use the fader-

adjustment from your headunit.

2 Input Level Control

This Input sensitivity control allows you to adjust the input sensitivity to

the output of your source unit, in order to get a maximal signal transmission.

3 Subsonic ﬁlter On/Off Switch

This switch allows you to switch on or off the Subsonic ﬁlter.The Subsonic

ﬁlter ﬁlters the lowest (non musical) frequencies out, which will make your

speakers (especially your woofers) sound more naturally.

4 Subsonic Frequency Adjustment

The subsonic frequency adjustment allows you to adjust the frequency which

is ﬁltered by the subsonic ﬁlter. By adjusting this frequency (between 10-40Hz)

to the frequency-range of your subwoofer, you can get an optimal result.

2 3

SPECIFICATIONS AND FEATURES

• Second, the -12V ground terminal must be connected.The -12V ground is the

second slot(B) from the left of the powerconnector.This cable has to be faste-

ned securely to the chassis of the vehicle with the same gauge cable as the posi-

tive cable (the same amount of power has to run through it). Preferrably you

should have the same ground connection for your entire system. Ensure that all

paint,undercoating or any other insulation is removed from the area where you

want to make your ground connection to.

• Third to connect is your remote turn-on.The R (remote turn on) is the third

slot(C) from the left of the powerconnector. Many radio-cassette and CD-players

have an output terminal for connection of the Remote turn on. If you don’t have

such an output, a separate switch must be installed to control your remote

on/off functions.

• The last terminal to connect is your Delayed Remote output.The D/R (Delayed

Remote output is the ﬁrst slot (D) from the right of your powerconnector.The

delayed remote output should be connected to all the ampliﬁers and other

equipment following the CX4R, so they can be started with a 2 seconds delay.

Signal input

The next to connect is your signal input. Choose the correct length and style of

RCA patch cables for your needs. Better RCA’s, such as the ones from the

Caliber CL 600 and CL 800 Get Connected Series, have gold-plated connectors

and multiple layers of shielding for better noise rejection. These twisted cables

give a better result in combination with the balanced outputs. (Consult your ofﬁ-

cial Caliber dealer about these cables and RCA’s).

Be extra careful when running your RCA patch cables. Car environments are

notorious for poorly insulated wires.This means that hiss, engine noise and fan

noise can easily be picked up trough RCA cables, if ran incorrectly.As a precau-

tion, avoid placing your RCA’s near large wire looms and electronic fans when-

ever possible.

Connect the patch cables to the RCA output of your source unit. Run the RCA

cables to the location of the CX4R, and connect them to the input RCA con-

nectors of the CX4R. Be sure to connect the right channel to the right channel,

and the left to the left. (In an audio system the right always has red RCA con-

nectors, and the left RCA connectors are white or black).

Signal output

Once you have connected the inputs, it is time to connect the outputs. Be care-

ful to connect, via RCA patch cables, the correct output to the correct ampliﬁer.

Ta ke good care in the balance of your signal (Right to right, and left to left).

Now that you have connected all your signal and power cables, it is time to con-

nect your battery again, and place the 1A fuse in the fuseholder.

SIGNAL INPUT / OUTPUT

MOUNTING AND CONNECTING YOUR CX4R

15-20 Modulair Resistor Units

These 16-pins modulair resistor units are what it is all about with the CX4R.

They allow you to create a really personal sound, which is especially tuned

for your installation. By changing the resistor value of these units, you can

determine your own crossoverfrequency per channel.The sequence of these

resistor units is shown in the graphics below them. So, module 1 (15) is for

the High Pass side of your Band Pass channel, and module 2 (16) is for the

Low Pass side of your Band Pass Channel, and so on.

By giving all the modules your own resistor value (and thus their own bandwidth)

you can tune your installation to perfection. How you can calculate the resistor

values for each frequency is demonstrated in a separate chapter.

21 Clipping LED’s

These clipping LED’s will warn you when an output is clipping.When they lit

up continously the output is clipping, and you should immediatly adjust the

outputlevel, or you will damage your speakers.When these LED’s start to

ﬂicker, the output is almost clipping.This is a warning sign for you to take

extra care to the output level.

22 Outputs

Docking ports for the RCA cables which lead to the various ampliﬁers.

Mounting your CX4R

Find a steady, secure area to mount your CX4R. Be sure it is accessible,but not in an

area where the adjustments may be bumped by accident. Use the chassis of the

CX4R as a template and mark the locations of the mounting holes.Predrill the moun-

ting holes using a 2,5 mm diameter drill bit and use the screws supplied with your

CX4R to fasten your 4-way crossover. Make sure the screws are tightened securely.

Getting your power started

REMEMBER TO ALWAYS DISCONNECT BATTERY GROUND

BEFORE WORKING ON A VEHICLE’S ELECTRICAL SYSTEM

• First, the +12V terminal is connected.The +12V termi-

nal is the ﬁrst slot(A) from the left of the powercon-

nector. Use the same +12V source as you are using for

your ampliﬁers, in order to avoid picking up noise due

to voltage differences.

Don’t forget to add an inline fuseholder holding a

1A fuse at the beginning of the powercable for the

CXQ20.This to protect both your vehicle and

audiosystem in case of a short.

+-D/R

A B C D

screwdriver

Specyfikacje produktu

Marka:	Caliber
Kategoria:	Radia samochodowe
Model:	Crossover CX 4 R

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Caliber Crossover CX 4 R, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Radia samochodowe Caliber

Caliber RCD110B Instrukcja

13 Października 2024

Caliber CA 160 V2 Instrukcja

12 Października 2024

Caliber RMD213 Instrukcja

12 Października 2024

Caliber RCD266BT Instrukcja

10 Października 2024

Caliber RCD120BT Instrukcja

7 Października 2024

Caliber MCD 265 Instrukcja

6 Października 2024

Caliber CA 130 Instrukcja

3 Października 2024

Caliber RCD120 Instrukcja

27 Września 2024

Caliber RCD 239DAB-BT Instrukcja

24 Września 2024

Caliber RMD 234DAB-BT Instrukcja

22 Września 2024

Instrukcje Radia samochodowe

Najnowsze instrukcje dla Radia samochodowe

JVC KD-R90BT Instrukcja

15 Października 2024

Kenwood KMM-X705 Instrukcja

15 Października 2024

Alpine CDM-7870R Instrukcja

14 Października 2024

Hyundai H-CMD2009 Instrukcja

14 Października 2024

Dual XC4100 Instrukcja

13 Października 2024

Audiovox VXE 3010 Instrukcja

13 Października 2024

MB Quart PAB 5400 Instrukcja

13 Października 2024

Hyundai H-CDM8023 Instrukcja

13 Października 2024

JVC KD-X30 Instrukcja

13 Października 2024

Hyundai H-CDM8010 Instrukcja

13 Października 2024