Instrukcja obsługi Caliber CA 2010 D Pro

Caliber Radia samochodowe CA 2010 D Pro

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Caliber CA 2010 D Pro (29 stron) w kategorii Radia samochodowe. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/29
Thank you for choosing a Caliber product. In doing so you’ve demonstrated a
desire to own the finest in Car Audio Technology. Caliber strives to provide you
with the finest products possible, and is always looking for ways to please our
customers even more.
Properly installed, your Caliber amplifier will provide years of high quality sonic
reproduction. Before installing the amplifier in your vehicle, please read this enti-
re manual carefully, in order to protect your vehicle, and get the maximum per-
formance of your mobile sound system.
Caliber Warranty
Due to the complexity of our products, we strongly recommend that this ampli-
fier is installed by your authorized Caliber dealer. If properly installed by your
dealer we provide a warranty for 12 month from the date of purchase.
If you install this amplifier yourself, we wish you lots of fun and succes in doing
so. If you follow our guidelines, you’ll get the best result. Our warranty, however,
will be limited to and not exceed 30 days from the date of purchase.
Caliber Accessories
To r ealize the exceptional performance of which this amplifier is capable, it is
necessary that power sources, signal sources, speakers and interconnects are of
the highest quality. Remember that Caliber is not just an amplifier manufacturer.
We also manufacture everything needed for the ‘optimal’ Car Audio System
(except the car). So be sure to ‘Get Connected’ with Caliber and ask your local
Caliber dealer for our accessories.
Contents
Before you start your installation . . . . . . . . . . . . . . . . . . . . . .This page
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Getting your power started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Signal in / Signal out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Caliber Control System (CCS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Speaker output / Getting tuned . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Facts to Remember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Manuel de propriétaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Bedienungsanleitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1
BEFORE YOU START
F
D
3
Digital Amplifier specifications.
CA 2010D Pro
Maximum Power Output at 13V
4 Ohm 1x 800W
2 Ohm 1x 1600W
1 Ohm 1x 2000W
Continuous Power Output at 13V
4 Ohm 1x 400W
2 Ohm 1x 800W
1 Ohm 1x1000W
Low Pass Filter 24db/Oct. 50 - 250Hz
Subsonic Filter 24db/Oct. 20 - 50Hz
Frequency response (+0, -1dB) 10Hz - 250Hz
Total Harmonic Distortion <0,44% with 80kHz Bandpass
Signal to noise ratio (A-Weighted) >70dB
Input Sensitivity 500mV - 15V
Output Impedance 1 - 4 Ohm
Fuse Rating 80A
Dimensions (WxHxD mm) 300 x 90 x 235
CALIBER DIGITAL AMPLIFIER SPECIFICATIONS
Due to our effort to innovate and improve our amplifiers, this modern digital
Caliber Competition Pro amplifier offers you the following features:
•Pulse Width Modulated (PWM) MOSFET Power Supply.
•1 Ohm Stable.
•Double-sided epoxy board for jumperless signal paths.
•Variable input sensitivity 500mV to 15V.
• Thermal, Overload and Short-circuit protection.
•Excellent muting circuitry assures no turn on/off ‘pops’.
•Built-in adjustable Low Pass Filter 50 - 250Hz.
•Built-in adjustable Subsonic Filter 20 - 50Hz.
•On/Off switch for built-in Subsonic Filter
•Differential inputs to shunt any input noise.
•Signal output RCA’s for additional amplifier(s).
•Large power supply connectors for optimal power distribution.
•European design and engineering.
•Superb Sonic performance for your ‘Dream Machine’ on wheels.
•Years and years of acoustic pleasure.
•Digital Remote Control for the sub-woofer level.
•CSS entrance for optional Caliber Control System.
2
CALIBER AMPLIFIER FEATURES
Getting your power started
• First, the +12V terminal is connected directly to the battery of your car. Use
a cable of at least 10 mm2 (8 AWG), and make sure that the connectors are of
the same value. Don’t forget the extra “Vehicle protection” fuse.
The 12V +terminal should NOT be connected to the car fuse box.
• Second, the ground terminal (GND) must be fastened securely to the chassis of
the vehicle with the same gauge cable as the positive cable (the same amount
of power has to run through it). Ensure that all paint, undercoating or any other
insulation is removed from the area where you want to make your ground con-
nection to.
• Third, the last cable to connect is your remote turn-on (REM). Many radio-cas-
sette and CD-players have an output terminal for connection of the REM of a
amplifier.
If you don’t have such an output, a separate switch must be installed to control
your amplifiers on/off function.
REMEMBER TO ALWAYS DISCONNECT BATTERY GROUND
BEFORE WORKING ON A VEHICLE’S ELECTRICAL SYSTEM
5
Mounting your Caliber Amplifier
Before mounting your Caliber Amplifier you must carefully choose the place
where it can be installed.The amplifier has to have at least 5 cm (2”) ventilation
space at all sides, to allow the heat to rise away from the amplifier. Be sure that
the power and signal cables can enter and leave the amplifier in a straight line,
to avoid the risk of malfunction.
The amplifier should be protected from exposure to moisture and direct sun-
light.The best places for it to be mounted are:
• The floor of the trunk. • Under the driver’s seat.
If you’ve decided where to place your Caliber Amplifier, and you’ve convinced
yourself there is enough air circulation and protection from unusual hazards,
mark the mounting surface using the amplifier as a template (Placing masking tape
on these surfaces first will make your markings more visible).
Drill 2.5 mm (1/8”) diameter holes at the marked locations and mount the
amplifier using the supplied self-tapping screws.
Note: Do not drill any holes while using the amplifier as a template.
You can easily damage the amplifier’s epoxy powdered coating
in this manner.
REMEMBER TO ALWAYS DISCONNECT BATTERY GROUND
BEFORE WORKING ON A VEHICLE’S ELECTRICAL SYSTEM
• We highly recommend that you carefully design your Car Audio System before
you start the installation. Make sure that the cables for power and signal are
not on the same side of the vehicle.This will help reduce any noises caused by
the power cable radiating into the signal cables. If a signal cable is too close to
a power cable, it will pick up the magnetic field of the power cable, which will
lead to a loss of quality in the signal.
• Always use the largest gauge power/ground cable available, at least 10 mm
2(8
AWG). Ask your local Caliber dealer for the Caliber PowerflowTM power,
ground and remote cables.A guarantee for a safe power management.
• For the protection of your vehicle, always place a fuse or circuit breaker no
more than 30 cm (12”) from the battery. This fuse or circuit breaker should
be no greather than the fuse(s) of your amplifier for optimal protection.
For instance: a Caliber CA2010D amplifier has a 80A fuse.Your “vehicle pro-
tection” fuse should be about 60 - 80A. Get good professional advice about the
value of this specific fuse.
4
ELECTRICAL ISTALLATION
ELECTRICAL ISTALLATION

Specyfikacje produktu

Marka: Caliber
Kategoria: Radia samochodowe
Model: CA 2010 D Pro

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Caliber CA 2010 D Pro, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Radia samochodowe Caliber

Caliber

Caliber RCD110B Instrukcja

13 Października 2024
Caliber

Caliber CA 160 V2 Instrukcja

12 Października 2024
Caliber

Caliber RMD213 Instrukcja

12 Października 2024
Caliber

Caliber RCD266BT Instrukcja

10 Października 2024
Caliber

Caliber RCD120BT Instrukcja

7 Października 2024
Caliber

Caliber MCD 265 Instrukcja

6 Października 2024
Caliber

Caliber CA 130 Instrukcja

3 Października 2024
Caliber

Caliber RCD120 Instrukcja

27 Września 2024
Caliber

Caliber RCD 239DAB-BT Instrukcja

24 Września 2024
Caliber

Caliber RMD 234DAB-BT Instrukcja

22 Września 2024

Instrukcje Radia samochodowe

Najnowsze instrukcje dla Radia samochodowe

JVC

JVC KD-R90BT Instrukcja

15 Października 2024
Kenwood

Kenwood KMM-X705 Instrukcja

15 Października 2024
Alpine

Alpine CDM-7870R Instrukcja

14 Października 2024
Hyundai

Hyundai H-CMD2009 Instrukcja

14 Października 2024
Dual

Dual XC4100 Instrukcja

13 Października 2024
Audiovox

Audiovox VXE 3010 Instrukcja

13 Października 2024
MB Quart

MB Quart PAB 5400 Instrukcja

13 Października 2024
Hyundai

Hyundai H-CDM8023 Instrukcja

13 Października 2024
JVC

JVC KD-X30 Instrukcja

13 Października 2024
Hyundai

Hyundai H-CDM8010 Instrukcja

13 Października 2024