Instrukcja obsługi Bxterra BG550
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bxterra BG550 (5 stron) w kategorii UPS. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/5
USER MANUAL
www.bxterra.com
BG STANDBY UPS
BG 550 | BG450
1
WARRANTY & REGISTRATION
SAFETY INSTRUCTIONS
This bXterra product is constructed to provide unmatched power protection, quality and perfor-
mance for the duration of its lifetime. Please take a few minutes to register your new product at
www.bXterra.com/registration. Registration certies your product’s warranty, conrms your owner-
ship in the event of a product loss or theft and entitles you to free technical support. Please register
your product now to receive the benets of bXterra ownership.
SAVE THESE INSTRUCTIONS: This manual
contains important instructions that should be
followed during installation and maintenance of
the UPS and its batteries.
1. This unit is intended for installation in a
controlled environment (a temperature-
controlled and indoor area free of conductive
contaminants). Please avoid installing the
UPS in locations where there is standing
or running water, dust, direct sunlight or
excessive humidity.
2. This UPS utilizes voltage that may be
hazardous. Do not attempt to disassemble
the unit. Only factory service personnel may
perform repairs.
3. Connect your UPS directly to a properly-
grounded AC power outlet with fuse or
circuit breaker protection. Do not plug the
unit into an outlet that is not grounded.
Turn o and unplug the unit if you need to
de-energize it.
4. Not for use in a computer room as dened in
the Standard for the Protection of Electronic
Computer/Data Processing Equipment, ANSI/
NFPA 75.
5. To reduce the risk of re, connect only to a
circuit provided with 20 amperes maximum
branch circuit over current protection in
accordance with the National Electric Code,
ANSI/NFPA 70.
6. For best performance, keep the indoor
temperature around the unit between 32⁰ F
and 104⁰ F (0⁰ C and 40⁰ C).
7. Do not attach medical equipment or non-
computer related items, such as life-support
equipment, microwave ovens, or vacuum
cleaners to the UPS. bXterra does not sell
equipment meant for life-support or medical
applications. Visit our website for more
information about devices appropriate to
plug into this UPS.
8. Only stand or set up the UPS in the direction
specied in the Installation and Operation
section of this manual. Do not block fans and
leave adequate space around all sides of the
UPS for proper ventilation. Do not expose
the unit to direct sunlight and do not install
the unit near heat-emitting appliances such
as a space heater or furnace. This could
negatively impact the unit’s internal cooling
system and cause product damage not
covered under warranty.
9. Do not plug the UPS input into its own
output. Do not attach a power strip or surge
protector to the UPS.
10.Do not modify the UPS’s plug and do not
use an adapter that would eliminate the
UPS’s ground connection.
11.Do not use extension cords to connect the
UPS to an AC outlet.
12.If the UPS receives power from a motor-
powered AC generator, the generator must
provide clean, ltered, computer-grade
output. Consult your generator’s manual to
see if it meets these specications.
13.The main power outlet that supplies the
UPS should be easily accessible and near
the UPS.
14.To reduce the risk of re or electric shock,
do not use the unit on any transportation
such as airplanes or ships. The eect of
shock or vibration caused during transit and
the damp environment can cause the unit
to short out.
Battery Warnings:
Batteries can carry a risk of electric shock and
burn from high short-circuit current. There
are no user-serviceable parts inside the UPS,
except for the battery.
· Do not open the UPS except to perform
battery replacement
· Remove watches, rings or any metal objects
· Wear rubber gloves and boots
· Do not open or mutilate batteries. Released
electrolytes may be harmful to skin and
eyes.
· Do not short or bridge the battery terminals
with any object
· Unplug and turn o the UPS before
performing battery replacement
· Use tools with insulated handles
· Remove battery grounds during installation
and maintenance to reduce likelihood of
shock. Remove the connection from ground
3
CERTIFICATIONS
FCC COMPLIANCE
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in an installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver
-Connect the equipment to an outlet on a dierent circuit than the one to which the receiver is
connected
-Consult an experienced radio/TV technician for help
WARNING: Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
GREENTECH™ UPS HIGH-EFFICIENCY DESIGN
By implementing leading-edge components and design, the bXterra line of GreenTech™ UPS systems strive
to deliver better operating performance while reducing cost of operation. This can lead to less energy
usage and cost, extended device and battery life, and decreased heat generation by the unit.
ROHS DIRECTIVE
Aside from being Energy Star ® compliant, we are committed to and supporters of the Restriction of
Hazardous Substances (RoHS) directive, which strictly limits the use of six hazardous substances (lead,
mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl
ether (PBDE)) in electrical equipment.
Download the latest version of PowerFrame
TM software from www.bxterra.com to your hard drive.
Follow on-screen instructions to complete the software installation.
For optimal battery charge, always leave the UPS plugged into the AC outlet.
To store the UPS for an extended period of time, cover the unit and fully charge the battery
before disconnecting from AC power. While in storage, recharge the battery every three
months to prolong optimal battery life.
Specyfikacje produktu
| Marka: | Bxterra |
| Kategoria: | UPS |
| Model: | BG550 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Bxterra BG550, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje UPS Bxterra
1 Października 2024
1 Października 2024
1 Października 2024
1 Października 2024
1 Października 2024
1 Października 2024
1 Października 2024
1 Października 2024
1 Października 2024
1 Października 2024
Instrukcje UPS
- UPS Ikea
- UPS AEG
- UPS Lenovo
- UPS Voltcraft
- UPS LC-Power
- UPS Siemens
- UPS APC
- UPS Tripp Lite
- UPS Block
- UPS V7
- UPS Digitus
- UPS FSP
- UPS GYS
- UPS Online USV
- UPS Equip
- UPS Emerson
- UPS CyberPower
- UPS JUNG
- UPS Eaton
- UPS Adj
- UPS PowerWalker
- UPS Salicru
- UPS Energenie
- UPS Steren
- UPS East
- UPS Liebert
- UPS Avocent
- UPS Minute Man
- UPS Furman
- UPS Minuteman
- UPS Riello
- UPS Maruson
- UPS Phoenix Contact
- UPS Puls Dimension
- UPS Vanson
- UPS Approx
- UPS Altronix
- UPS Middle Atlantic
- UPS Atlantis Land
- UPS FSP/Fortron
Najnowsze instrukcje dla UPS
10 Grudnia 2024
10 Grudnia 2024
9 Grudnia 2024
9 Grudnia 2024
9 Grudnia 2024
9 Grudnia 2024
8 Grudnia 2024
8 Grudnia 2024
12 Października 2024
12 Października 2024