Instrukcja obsługi Brother PRWT 1


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Brother PRWT 1 (40 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/40
Table Set Installation Manual
Tischset-Installationsanleitung
Manuel d'installation de l'ensemble de table
Installatiehandleiding tafelset
Manuale di installazione del tavolo prolunga
Manual de instalación de la tabla
Manual de Instalação do Conjunto de Mesa
Инструкции по установке комплекта столика
ΞȜήσΓΛΠ৾ե୰ྶ੥
ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
ITALIANO
ESPAÑOL
PORTUGUÊS
РУССКИЙ
඾ུࢊ
1/4
Table Set Installation Manual
When using the border, quilt, flat or jumbo frame, it is recommended that the table be used for additional
support.
Note
When carrying the table, be sure to hold it
with both hands.
Attach the table to the machine before
installing the embroidery frame.
Do not place heavy objects on top of the
installed table or press down on it.
Remove the table from the machine while
using embroidery frame that do no need to
be used with the table or while
embroidering tubular items, bags or caps.
The embroidery frames for these types of
objects cannot be installed while the table
is attached to the machine.
Verifying the package
contents
Check that the following parts are included. If any
item is missing or damaged, contact your
authorized sales representative.
Included parts
Preparing for installation
1Remove the two screws on each machine
arm using the Phillips screwdriver included
with your machine or one of your own.
1Screws on machine arm
2Place a washer onto each of the four
hexagonal support screws.
3Insert the hexagonal support screws with
washers (two on each side).
Hand-tighten each hexagonal support screw.
1. 2. 3. 4.
5. 6. 7. 8.
No. Part Name
1Table
2Left table bracket
3Right table bracket
4Hexagonal support screws (4)
5Washers (4)
6Screws (4)
7Wrench
8Installation manual
ENGLISH
2/4
4Using the included wrench, firmly tighten
each hexagonal support screw (two on each
side).
5Align the holes in the right table bracket
with the hexagonal support screws on the
right side of the machine.
1Hexagonal support screws
2Holes in right table bracket
6Align the right table bracket with the holes
in the two hexagonal supports, insert the
screws and lightly tighten to hold the
bracket in place.
1Screws
7Attach the left table bracket following steps
5 6 and for the left side.
8Using the Phillips screwdriver included with
your machine or one of your own, firmly
tighten all screws.
XThe right and left table brackets are
installed on the machine.
Memo
Even if you sew without using the table,
you can leave the brackets attached.


Specyfikacje produktu

Marka: Brother
Kategoria: maszyna do szycia
Model: PRWT 1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Brother PRWT 1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje maszyna do szycia Brother

Instrukcje maszyna do szycia

Najnowsze instrukcje dla maszyna do szycia

Pfaff

Pfaff 463H Instrukcja

15 Stycznia 2025
Elna

Elna Lotus ZZ Instrukcja

14 Stycznia 2025
Juki

Juki MS-1190 Instrukcja

12 Stycznia 2025
Pfaff

Pfaff 295-1 Instrukcja

12 Stycznia 2025
Alfa

Alfa 1412 Instrukcja

11 Stycznia 2025
Jata

Jata MC822 Instrukcja

11 Stycznia 2025