Instrukcja obsługi Boss GP-10GK

Boss Niesklasyfikowane GP-10GK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Boss GP-10GK (20 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
DeutschEnglish Français Italiano Español Português Nederlands
Before using this unit, carefully read the sections entitled “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet “Read Me First” and Owner’s Manual p. 15). These
sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every
feature of your new unit, read the Owner’s Manual in its entirety. This manual should be saved and kept on hand as a convenient reference.
Copyright © 2014 BOSS CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION.
Owner’s Manual (this document)
Read this rst. It explains the basic things you need to know in order to use the GP-10.
PDF Manual (download from the Web)
• Parameter Guide
This explains the parameters and audio signal ow of the GP-10.
• Sound List
This is a list of the sounds built into the GP-10.
• MIDI Implementation
This is detailed information about MIDI messages.
To obtain the PDF manual
1. Enter the following URL in your computer.
http: //www.roland.com/manuals/
2. Choose “GP-10” as the product name.
Owner’s Manual
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Turning the Power On/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Specifying the Output System (Sys: Output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting Up the GK Pickups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Basic Operation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Modeling/Poly FX/Alternate Tuning Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Modeling Settings (Mdl: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Electric Guitar (EG: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Acoustic (AC: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bass (EB: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Synthesizer (Synth: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Poly FX (PolyFx: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Alternate Tuning Settings (AltTune: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
12-String Guitar Settings (12Str: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
String Bend Function Settings (StrBend: ) . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Other Modeling Settings (Mdl: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Eects/Patch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Eects Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Preamp (Amp: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
FX (FX: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Wah (Wah: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Chorus (Chorus: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Delay (Delay: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Reverb (Reverb: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
EQ (EQ: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Noise Suppressor (NS: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Foot Volume (FV: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Settings for Normal Pickup (Nrml PU: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Volume Balance of the Modeling and the Normal Pickup (Mixer: ) . .11
FX Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Patch Settings (Patch: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Patch Volume (Patch: Level) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Patch Tempo Settings (Patch: Tempo) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
GK Set Selection for the Patch (Patch: GK Set) . . . . . . . . . . . . . . . . . . . . .11
Pedal and Switch Settings for Each Patch (Ctl: ) . . . . . . . . . . . . . . . . . . . .11
Assign Settings (Asgn 1–8: ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Specifying the Output System (Sys: Output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Settings of the GK Pickups (GK: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
System Settings for the Pedals and Switches (SysCtl: ) . . . . . . . . . . . . . . . . . . . .13
USB Audio Settings (USBAudio: ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Guitar Performance MIDI Output Settings (MIDI: ) . . . . . . . . . . . . . . . . . . . . . . . .13
Tuner Settings (Tuner: ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Adjusting the Display’s Contrast (Sys: Contrast) . . . . . . . . . . . . . . . . . . . . . . . . . .14
Panel Lock Settings (Sys: Knob Lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Auto O Settings (Sys: Auto O) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Limiting the Patches Selectable in the Play Screen (Sys: Patch Extent) . . . . .14
Adjusting the Expression Pedal (Calibration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Restoring the Factory Settings (Factory Reset) . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Patch Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Exchanging Patches (Exchange) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Inserting a Patch (Insert) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Initializing a Patch (Initialize) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Error Message List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Main Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Cutting-edge modeling guitar powered by COSM
The GP-10 provides a wide range of modeling guitars powered by COSM technology, including Stratocaster, Telecaster, Les Paul, Jazz Guitar, Acoustic Guitar, and Sitar. In
addition, it can also create new dimensions of sound that are unavailable from conventional electric guitars, such as a Wide Range model that gives you a fat sound while
preserving the wide range of a single-coil pickup, and a Bright Humbucker model that keeps the rich mid- and low-range of a humbucker while oering a crisp high end.
A variety of alternate tunings
You can choose from alternate tunings such as Drop-D, Open-G, and D-MODAL. Without swapping guitars or changing the string tension, you can instantly switch between
a wide variety of alternate tunings. There’s also a 12-string guitar mode. You can even use “USER” to specify your own tuning.
Powerful eects and amp modeling
High quality eects and amp modeling are built in. There is also a dedicated “Poly FX” specically for the GK pickup, which allows you to extract an independent string
signal for each string. This lets you experience completely new sounds that were impossible for a guitar of the past, equipped with a conventional pickup.
2
EXP 2/CTL 3, 4 jack (Connecting to External Pedals)
Connections
OUTPUT jacks
Connect these jacks to
your guitar amp or to PA
(LINE).
* If your system is monaural,
use only the L/MONO jack.
USB ( ) port
Use a commercially available USB 2.0 cable to connect this port to your
computer. It can be used to transfer USB MIDI and USB audio data. You must
install the USB driver before connecting the GP-10 to your computer.
Download the USB driver and the GP-10 special software from the Roland
website. For details, refer to Readme.htm which is included in the download.
http: //www.roland.com/support/
AUX IN jack
Use a stereo mini-plug cable
to connect your audio player
here.
* To adjust the input level of the
AUX IN jack, adjust the volume
of the connected device (audio
player, etc.).
PHONES jack
Connect a set of headphones (sold
separately) here.
* When you connect a stereo-mini plug
to this jack, the internal guitar amp
simulator will be automatically on so
that you can also enjoy the powerful
guitar sound with your
headphones. In this case,
the sound from OUTPUT
jacks will have the same
eect.
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
DC IN jack
Connect the included AC
adaptor here.
* Use only the included
AC adaptor. Using any
other adaptor may cause
overheating and malfunction.
Turning the Power On/O
This turns the power on/o.
* After you’ve made connections correctly, be sure to turn on
the power in the order of the GP-10 rst, and then the
connected system. Powering-on in the incorrect order may
cause malfunctions or damage. When turning the power o,
power-o the connected system rst, and then the GP-10.
* This unit is equipped with a protection circuit. A brief interval (a
few seconds) after turning the unit on is required before it will
operate normally.
* Before turning the unit on/o, always be sure to turn the
volume down. Even with the volume turned down, you might
hear some sound when switching the unit on/o. However, this
is normal and does not indicate a malfunction.
Auto O function
The power to this unit will be turned o automatically after a
predetermined amount of time has passed since it was last used
for playing music, or its buttons or controls were operated (Auto
O function).
If you do not want the power to be turned o automatically,
disengage the Auto O function (p. 14).
* Any settings that you are in the process of editing will be lost
when the power is turned o. If you have any settings that you
want to keep, you should save them beforehand.
* To restore power, turn the power on again.
If you connect an expression pedal (sold separately: Roland EV-5, FL-500H/L) or footswitch (sold separately: FS-5U, FS-6) to the EXP 2/CTL 3,4 jack, you can use a pedal to
control the volume or to turn eects on/o.
For details on the settings, refer to “Pedal and Switch Settings for Each Patch (Ctl: )” (p. 11), “System Settings for the Pedals and Switches (SysCtl: )” (p. 13).
POLARITY switch
When Connecting an FS-5U When Connecting Two FS-5Us When Connecting an FS-6When connecting EV-5
Cable:
Stereo 1/4” phone type
1/4” phone type x 2
MODE/POLARITY switch
Cable:
1/4” phone type
1/4” phone type
Ctl 3 Ctl 4 Ctl 3 Ctl 4 Ctl 3Exp 2
Connect the GK-compatible
guitar only with dedicated GK
cable (supplied with Roland GK-
compatible devices and optional
GK cables). Use of any other
cable may result in damage or
malfunction.
To prevent the inadvertent disruption
of power to your unit (should the plug
be pulled out accidentally), and to avoid
applying undue stress to the DC IN jack,
anchor the power cord using the cord hook,
as shown in the illustration.
Security slot ( )N
http: //www.kensington.
com/
GUITAR IN jack
Use this control if you’re directly inputting a conventional guitar.
* If you use a 1/4” phone plug to make connections, the modeling and alternate tuning functions will
not operate. Only the eect functions will operate.
GUITAR OUT jack
Normal pickup signals of the guitar are output.
* Use only the specied
expression pedal (Roland EV-5,
FL-500H/L; sold separately).
By connecting any other
expression pedals, you risk
causing malfunction and/or
damage to the unit.
GK IN connector
Connect a guitar equipped
with a GK pickup (Roland
GK-3/GK-2A) or a GK-
compatible guitar such as the
Roland V-Guitar GC-1 to this
connector.
Cable:
Stereo 1/4” phone type
Stereo 1/4” phone type
3
DeutschEnglish Français Italiano Español Português Nederlands
Initial Setup
Before using the GP-10 for the rst time, you’ll need to make the following initial
settings.
Basic procedure for initial setup
1. Press the [SYSTEM] button.
2. Use the [ ] [ ] buttons to select the desired parameter. Then use the K J
[VALUE] knob to edit the value.
GK1:Type
GK-3
Select a parameter
Edit the value
3. Press the [EXIT] button to return to the play screen.
MEMO
You can use the following button operations to jump to the / marks of this document + ,
(p. 13–).
Buttons Jump destination Buttons Jump destination
[SYSTEM] Next mark Next mark+[ ] + [ ] J K , +
[EXIT] + [SYSTEM] Previous mark Previous mark+[ ] + [ ] K J , +
* [ ] + [ ] mean that you should “hold down [ ] and press [ ].”J K J K
Specifying the Output System (Sys: Output)
Choose “Sys: Output,” and specify the device (amp) that’s connected to the OUTPUT
jacks.
Sys:Output
LINE/PHONES
* If headphones are connected, this will automatically be “LINE/PHONES” regardless
of the Output setting.
Value Explanation
LINE/PHONES This is the appropriate setting when using headphones, or for when the
GP-10 is connected to a keyboard amp, mixer, or digital recorder.
JC-120 Choose this setting if the GP-10 is connected to the guitar input of a Roland
JC-120 guitar amp.
SMALL AMP Choose this setting if the GP-10 is connected to a small guitar amp.
COMBO AMP
Choose this setting if the GP-10 is connected to the guitar input of a combo-
type guitar amp (i.e., an amp that contains the amp and speaker in a single
unit) other than the JC-120. Depending on the guitar amp you’re using,
using the “JC-120” setting might produce better results.
STACK AMP
Choose this setting if the GP-10 is connected to the guitar input of a stack-
type guitar amp (i.e., an amp in which the amp and speaker are separate
units).
JC-120 RETURN Choose this setting if the GP-10 is connected to the JC-120’s RETURN jack.
COMBO RETURN Choose this setting if the GP-10 is connected to the RETURN jack of a combo-
type guitar amp.
STACK RETURN
Choose this setting if the GP-10 is connected to the RETURN jack of a stack-
type guitar amp. You should also choose the “STACK RETURN” setting when
using the GP-10 with a guitar power amp and a speaker cabinet.
Setting Up the GK Pickups
GK settings are extremely important in order to play the GP-10 with the best possible
sound. You must be sure to make these settings correctly.
MEMO: GK settings
You can store three dierent sets of GK settings
(GK Setting: 1–3). If you’re switching between three
dierent guitars to use with the GP-10, you can
make separate GK settings for each guitar. If you’re
using only one guitar with the GP-10, choose “1” (the default setting).
Specifying the pickup type
Choose “GK1: Type,” and specify the type of pickup that’s installed on your guitar.”
GK1:Type
GK-3
Value Explanation Value Explanation
GK-3 PIEZO FRoland GK-3
Piezo Pickup
Fishman
GK-2A PIEZO GRoland GK-2A Graph Tech
GC-1 Roland V-Guitar GC-1 L.R. BaggsPIEZO L
PIEZO Piezo Pickup (at response) RMCPIEZO R
* A piezo pickup is a type of pickup that is mounted on the bridge of the guitar, and
uses a piezoelectric element to detect the vibrations of the strings.
* Choose “GK-2A” if you’re using a commercially available guitar that’s equipped with
GK pickup.
Specifying your guitar’s scale length
Choose “Scale,” and specify your guitar’s scale length (the distance between
the bridge and nut).
GK1:Scale
ST
Choose “ST” for a standard Stratocaster type, or choose “LP” for a Les Paul
type. Alternatively, choose the closest value in the range of 500–660 mm.
* This parameter is not shown if you select “GC-1” as the pickup type.
Specifying the distance from the bridge
Choose “Distance 1”–”Distance 6,” and specify the distance
(mm) from the center of the pickup to the bridge saddle.
GK1:Distance 1
20.0mm
* If the pickup type is set to “GC-1” or one of the piezo-
type pickups, this setting is not necessary.
Adjusting the pickup sensitivity
What is Pickup Sensitivity?
If the distance between each string
and the GK pickup is dierent, the
volume will also be dierent. The
pickup sensitivity adjustment allows
you to compensate for this dierence
in volume.
GK-pickup “
1. Choose “Sens,” and adjust the sensitivity for the 6th string.
GK1:Sens 6
[■■■■■■■■] 50
Play the 6th string as strongly as you ever expect to play it in actual performance, and
use the [VALUE] knob to adjust the sensitivity as high as possible without allowing the
meter to reach the full-scale position.
* If the level meter reaches the full-scale position, the level is excessive. Lower the
sensitivity.
* Depending on the guitar you’re using, the level meter might reach full-scale even
if the sensitivity is at minimum. If this is the case, adjust the distance between the
divided pickup and the string so it’s somewhat greater than the recommendation.
2. In the same way, adjust the sensitivity for the 5th through 1st strings as well.
3. Check the volume balance of the six strings.
Play each of the strings 6–1 at normal strength; if a string sounds unusually loud,
lower the sensitivity of that string to minimize any discrepancy in volume between
the strings.
This completes the initial setup. Now you’re ready to play the GP-10!
GK:Setting
1
Check the following points before using the GP-10
Is the GK-pickup correctly installed?
• After reading the instructions in the GK-pickup Owner’s Manual, check the
installation once more.
• On the Roland website, the “How to install the GK pickup” page provides an
explanation and photos on how to attach a GK pickup. Be sure to take a look!
http: //www.roland.com/GK/
You must set the GK pickup select switch to the “MIX” position!
If the switch is set to any position other than MIX, the unit won’t operate correctly
(there will be no sound).
Roland GK-3 users Roland V-Guitar GC-1 users
You must set this to the center (MIX) position!

Specyfikacje produktu

Marka: Boss
Kategoria: Niesklasyfikowane
Model: GP-10GK

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Boss GP-10GK, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Boss

Boss

Boss BCAM60 Instrukcja

5 Października 2024
Boss

Boss ME-90B Instrukcja

5 Października 2024
Boss

Boss Reverb RV-6 Instrukcja

2 Października 2024
Boss

Boss Reverb RV-200 Instrukcja

29 Września 2024
Boss

Boss GKC-AD Instrukcja

27 Września 2024
Boss

Boss SDE-3000D Instrukcja

27 Września 2024
Boss

Boss Modulation MD-500 Instrukcja

27 Września 2024
Boss

Boss GT-1000CORE Instrukcja

27 Września 2024
Boss

Boss Pocket GT Instrukcja

27 Września 2024
Boss

Boss Metal Zone MT-2W Instrukcja

27 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024