Instrukcja obsługi Boss 760DI


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Boss 760DI (30 stron) w kategorii Radia samochodowe. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/30
This radio is equipped with the most advanced "TOUCH SENSE PANEL", so that it is
easy and convenient to use while driving.
Tips; Here are some tips to show you how easy it is to use this touch sense panel:
Tips
Using a very light touch on the radio panel will activate that feature. You will not need to
"PRESS" hard on the panel to make this radio change features.
The power button along with some of the buttons that have dual functions, will need to be
"TOUCHED" from 2 to 3 seconds to make the change.
The best area to "TOUCH" on the panel to make it activate is the illuminated or lighted area. For
example, just touch for 2 to 3 seconds the illuminated power symbol and the unit will turn on or
off.
1. INSTALLATION
Before finally installing the unit, connect the wiring temporarily and make sure it is all
connected up properly and the unit and system work properly.
Use only the parts included with the unit to ensure proper installation. The use of
unauthorized parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or other
modifications of the vehicle.
Install the unit where it does not get in the driver's way and cannot injure the passenger if
there is a sudden stop, like an emergency stop.
If installation angle exceeds 30 from horizontal, the unit might not give its optimum
performance.
°
Avoid installing the unit where it would be subject to high temperature, such as from direct
sunlight, or from hot air, from heater, or where it would be subject to dust dirt or excessive
vibration.
Be sure to remove the front panel before installing the unit.
DIN FRONT/REAR-MOUNT
This unit can be property installed either from “Front” (conventional DIN Front-mount) or “Rear”(DIN
Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details,
refer to the following illustrated installation methods A and B.
DIN FRONT-MOUNT (Method A)
Installation the unit
1. Dashboard
2. Holder
After inserting the half sleeve into the
dashboard, select the appropriate tab
according to the thickness of the
dashboard material and bend them
inwards to secure the holder in place.
3. Screw
1
7
4
23
5
61. Dashboard
2. Nut (5mm)
3. Spring washer
4. Screw (4x12mm)
5. Screw
6. Support Strap
Be sure to use the support strap to secure
the back of the unit in place. The strap can
be bent by hand to the desired angle.
7. Plain washer
182
53
12
3
2


Specyfikacje produktu

Marka: Boss
Kategoria: Radia samochodowe
Model: 760DI

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Boss 760DI, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Radia samochodowe Boss

Boss

Boss MR63UAB Instrukcja

11 Grudnia 2024
Boss

Boss UTV4B Instrukcja

5 Października 2024
Boss

Boss BVD9988B Instrukcja

3 Października 2024
Boss

Boss BV6860BH Instrukcja

3 Października 2024
Boss

Boss BVCP9800W Instrukcja

3 Października 2024
Boss

Boss BVCPA10W Instrukcja

3 Października 2024
Boss

Boss BCPA8W Instrukcja

3 Października 2024
Boss

Boss Elite BEHDIN98 Instrukcja

29 Września 2024
Boss

Boss ATV654 Instrukcja

29 Września 2024
Boss

Boss ATVB6.5R Instrukcja

28 Września 2024

Instrukcje Radia samochodowe

Najnowsze instrukcje dla Radia samochodowe