Instrukcja obsługi Bosch AutoDome VG4-MCAM-22

Bosch Kamera monitorująca AutoDome VG4-MCAM-22

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bosch AutoDome VG4-MCAM-22 (12 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
CCTV | AutoDome Modules and Accessories
The Bosch AutoDome modular camera system is a
revolutionary new concept in dome cameras. The entire
AutoDome system is based on five interchangeable
modules: the Central Processing Unit (CPU), camera,
housing, communications, and power supply. Simply swap
one of the AutoDome’s interchangeable modules and
quickly upgrade from analog to IP, color to day/night, or add
motion detection, and AutoTrack. Never before have you
had the ability to adapt a security system to your changing
needs this quickly or inexpensively.
The Bosch AutoDome also features a selection of power
supply and mounting accessories with clear or tinted
bubbles.
Interchangeable modules
Five interchangeable modules allow you to update camera
functionality quickly and cost-effectively. Using common
components lets you install a basic camera system today
and migrate to a more advanced version tomorrow –
without having to replace the entire dome, thus protecting
your initial investment.
By using the same housing components, all installations
have a consistent look, and observers have no idea which
type of camera (if any) is watching over them. This unique,
modular design also gives you the flexibility to move
cameras between different housings when special coverage
is needed, or as site plan requirements change. For
example, an 18x PTZ camera over a specific area could
easily be “hot-swapped” to a 26x day/night without
removing the power. AutoDome’s Ethernet communications
module allows you to add IP functionality while maintaining
connectivity to existing analog inputs and outputs.
Functions
CPU Modules
100 Series CPU Module
The 100 Series CPU module provides fixed camera
functionality, “hotswap” camera module replacement,
pluggable communications module upgrades, and built-in
surge suppression.
200 Series CPU Module
The 200 Series CPU module delivers fast 360° per second
pan/tilt/zoom speeds, “hotswap” camera module
replacement, pluggable communications module upgrades,
built-in surge suppression, advanced diagnostics, and
multilingual displays.
This module supports 64 pre-positions and a single preset
tour. The preset tour has the capacity for up to 64 pre-
positions with a configurable dwell time between pre-
positions.
AutoDome Modules and Accessories
▶Interchangeable Central Processing Unit (CPU),
Camera, Housing and Communications modules
▶Analog and Hybrid (analog/IP) Communications
module options
▶24 VAC, 120 VAC, and 230 VAC Power Supply Units
with an optional Fiber Optic Module
▶Roof, Pipe, and Pendant Arm Mounting Systems
▶Analog and IP Fiber Optic Communication Units
▶Rugged Polycarbonate and High-resolution Acrylic
Bubble Options
www.boschsecurity.com
2 | AutoDome Modules and Accessories
300 Series CPU Module
The 300 Series CPU module includes all of the features of
the 200 Series plus additional presets and tours, cable
compensation to extend cabling distances, and third-party
protocol support. The Advanced Series also supports
privacy masking and advanced alarm handling via a built-in
rules engine.
500i Series CPU Module
The 500i Series CPU module includes all of the features of
the 300 Series plus AutoTrackII motion tracking and video
motion detection.
Camera Modules
High-performance Fixed Camera
The high-performance fixed cameras have a 1/3-inch
interline CCD with Bosch’s unique 15-bit Dinion digital
imaging technology to deliver a 32-fold sensitivity
improvement and a full 540 horizontal lines of resolution.
Available in color and day/night versions, these cameras
incorporate a number of features not found in other fixed
dome cameras.
High-performance 18x PTZ Color Camera
The high-performance 18x PTZ color cameras have a 1/4-
inch color CCD. With 470/480 TVL (NTSC/PAL) horizontal
resolution and sensitivity down to 0.5 lux, this camera offers
exceptional performance at an affordable price. A rugged
motor with fewer moving parts mean that this camera uses
less power and is extremely reliable, making it ideal for high-
usage applications.
High-performance 18x and 26x PTZ Day/Night Camera
The high-performance PTZ day/night cameras have
470/480 TVL (NTSC/PAL) horizontal resolution. These
cameras are available with either an 18x or a 26x optical
zoom lens, and all cameras offer a full 12x digital zoom. The
AutoScaling (proportional zoom) and AutoPivot
(automatically rotates and flips the camera) features ensure
optimal control.
High-performance 36x PTZ Day/Night Camera
Bosch offers the industry-leading 36x optical zoom lens
with a full 12x digital zoom. The 36x camera provides a full
540 TVL of horizontal resolution for outstanding clarity and
image detail. The 36x camera also incorporates an
advanced backlight compensation technology that
dramatically improves the dynamic range by 128 times,
resulting in clear image reproduction in extreme high-
contrast environments.
Housing Modules
All housings feature recessed screws and latches for
increased tamper resistance.
AutoDome pendant housings (indoor and outdoor) are
rated to provide IP 66 protection. In addition, the pendant
housings come equipped with a low-impact, high-resolution
acrylic bubble for enhanced image clarity
AutoDome in-ceiling housings provide IP 54 protection and
are rated IK 8 (IEC 62262). These housings feature an
impact-resistant polycarbonate Rugged Bubble to protect
your camera from vandalism. The Rugged Bubble can
withstand impacts equivalent to a 4.5 kg (10 lb) weight
dropped from a height of 3 m (10 ft).
Outdoor EnviroDome housings provide an operating
temperature range down to -40°C (-40°F). The optional “XT”
extreme temperature kit allows an AutoDome to operate in
temperatures down to -60°C (-76°F), ensuring reliable
operation in even the harshest environments.
The Pressurized Environmental Housing is rated to provide
IP 67 protection for a VG4 Series AutoDome ® Modular
Camera System from the elements, both natural and
manmade. It is the ideal surveillance solution for
applications that require frequent wash-down, including
traffic, transit, bridges, tunnels and coastal installations
where salt, moisture, dust, insects and fumes threaten the
long-term operation of the camera.
Communications Modules
Fixed Communications Module
The Fixed Communications Module (standard on the
AutoDome 100 Series) supports a variety of standard video
and data transmission methods, including Bilinx (over coax
and UTP) remote control, configuration, and firmware
updates can also be performed over these cables, offering
you unparalleled control of your cameras.
Standard Analog Communications Module
The Standard Analog Communications Module (standard on
the AutoDome 200 and 300 Series) supports a variety of
data transmission methods, including Bilinx (over coax and
UTP) and fiber. Remote control, configuration, and
firmware updates can also be performed over these cables,
offering you unparalleled control of your cameras. Cable
compensation provides extended coaxial and UTP distance
runs while preventing the image quality degradation caused
by signal losses from long cable lengths.
Alternative Protocol Communications Module
The Alternative Protocol Module allows you to control a VG4
AutoDome from an American Dynamics Manchester or
Sensormatic RS-422 PTZ control device.
TCP/IP Communications Module
The TCP/IP Communications Module is an integral part of
Bosch’s AutoDome Modular Camera System, adding
network connectivity to any AutoDome 100, 200, 300 or
500i Series camera. The TCP/IP module provides complete
network-based control of all dome functionality including
pan/tilt/zoom operation, presets, tours, and alarms as well
as web-based configuration of all dome settings.
AutoDome Modules and Accessories | 3
AutoDome cameras equipped with the TCP/IP
Communications Module deliver true hybrid operation.
With both Ethernet and analog BNC connections, network-
enabled AutoDome cameras provide direct network
connection while simultaneously supporting existing analog
equipment. The TCP/IP Communications Module uses the
latest compression technology, bandwidth throttling, and
tri-streaming capabilities to efficiently manage bandwidth
and storage requirements while delivering outstanding
image quality.
Power Supplies
Bosch offers a variety of power supply units that are
available with 24 VAC, 120 VAC, or 230 VAC transformers,
come with an optional analog, multimode Fiber Optic video
transmitter/data receiver module, and are NEMA-rated.
Accessories
Fiber Optic Kits
The VG4-SFIBER-MM (multimode) is an analog, fiber optic
conversion kit for use with VG4 Series AutoDomes using
either the Fixed or the Standard Communications Modules.
This module is a video transmitter/data receiver modules
designed to be mounted directly into a VG4 AutoDome
power supply box.
The VG4-SFPSCKT is a unique media converter module for
use with VG4 series AutoDomes incorporating the Ethernet
(TCP/IP) Communications Module. This media converter
module is designed to accept any of the 10/100 Mbps SFP
modules described below.
The media converter module along with the SFP module is
user installed directly into the AutoDome's power supply
box to provide an integrated fiber optic solution.
Mounts
Bosch offers three mounting options for the AutoDomes:
roof, pipe, or pendant arm mounts. The pendant arm
mounts come with a connected power supply unit. In
addition, Bosch offers an accessory to mount a unit in an
upright position on a flat surface.
Bubbles
All housings feature recessed screws and latches for
increased tamper resistance. AutoDome in-ceiling models
feature an impact-resistant rugged polycarbonate bubble to
protect your camera from vandalism. Designed to meet
stringent strength standards without compromising optical
clarity, the Rugged Bubble can withstand impacts
equivalent to a 10 pound (4.5 kilograms) weight dropped
from a height of 10 feet (3 meters). AutoDome pendant
cameras come equipped with a low-impact, high-resolution
acrylic bubble for enhanced image clarity, but can easily be
upgraded to the Rugged Bubble when needed.
Both the rugged polycarbonate and the high-resolution
acrylic bubbles are available in clear, tinted (smoke), gold
and chrome. The clear bubble offers maximum sensitivity by
allowing as much light through as possible. The tinted, gold
and chrome bubbles offer covertness by making it difficult
to see the direction the camera is looking from the outside.
Certifications and Approvals
Region Certification
Europe CE VG4-1ab-cdefgh, VG4-2ab-cdefgh,
VG4-3ab-cdefgh, VG4-5ab-cdefgh, VG4-
A-PAxx, VG4-A-PSUxx
Electromagnetic Com-
patibility (EMC)
Complies with FCC Part 15, ICES-003, and CE
regulations
Product Safety Complies with CE regulations, UL, CSA, EN, and
IEC Standards
Technical Specifications
Central Processor Unit Modules
VG4-MCPU-100 Unity Pass-through CPU, 100 Series
VG4-MCPU-200 Basic CPU, 200 Series
VG4-MCPU-300 Standard CPU, 300 Series
VG4-MCPU-500 Advanced CPU with Video Content Analysis, 500 Ser-
ies
Camera Modules
2.7–13.5 mm Fixed Color Camera
Availability 100 Series only
VG4-MCAM-51 PAL
VG4-MCAM-61 NTSC
Imager 1/3 in. Interline CCD
(752 x 582 PAL)/(768 x 492 NTSC)
Lens
Iris Automatic
Field of View 78.3° to 18.5°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Off, auto (with adjustable limit), and manual
Synchronization Line-Lock (0° to 358° vertical phase adjust) or
internal crystal
Aperture Correction Horizontal and vertical
Horizontal Resolution 540 TVL (NTSC)/540 TVL (PAL)
Sensitivity 30 IRE 50 IRE (typical)
SensUp Off 0.29 lx 0.9 lx
SensUp On (15x) 0.029 lx 0.09 lx
www.boschsecurity.com

Specyfikacje produktu

Marka: Bosch
Kategoria: Kamera monitorująca
Model: AutoDome VG4-MCAM-22

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bosch AutoDome VG4-MCAM-22, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kamera monitorująca Bosch

Bosch

Bosch VDC‑445V04‑10 Instrukcja

7 Października 2024
Bosch

Bosch 7000i Instrukcja

7 Października 2024
Bosch

Bosch FLEXIDOME IP indoor 4000 IR Instrukcja

4 Października 2024
Bosch

Bosch VDI-240 Instrukcja

30 Września 2024
Bosch

Bosch BRS-TOW-4100A Instrukcja

29 Września 2024
Bosch

Bosch BRS-RAC2-8100A Instrukcja

29 Września 2024
Bosch

Bosch DIVAR IP 5000 Instrukcja

29 Września 2024
Bosch

Bosch Smart Home Eyes Instrukcja

26 Września 2024
Bosch

Bosch AutoDome Easy II Instrukcja

25 Września 2024
Bosch

Bosch AUTODOME 4000 Instrukcja

25 Września 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Trebs

Trebs CCD-401C Instrukcja

15 Października 2024
Hikvision

Hikvision DS-2CE56D5T-AIRZ Instrukcja

15 Października 2024
D-Link

D-Link DCS-7510 Instrukcja

15 Października 2024
Ubiquiti Networks

Ubiquiti Networks UniFi Video UVC-G3-AF Instrukcja

14 Października 2024
Hikvision

Hikvision DS-2TD2137-7/VP Instrukcja

13 Października 2024
Alecto

Alecto DVC-215IP Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2CD2325FWD-I Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2CD2323G2-IU Instrukcja

12 Października 2024