Instrukcja obsługi Bogen S86T725PG8W

Bogen głośnik S86T725PG8W

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bogen S86T725PG8W (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Features
Ceiling Speaker
Grille Assemblies
• 4-watt capacity
• 8" cone speaker for excellent audio quality
• 6 different power taps available (4, 2, 1 1, /2, 1/4, 1/8 W)
• T725 4-watt transformer
• Off-white enamel over steel grille (“W” versions)
• Bright white enamel over steel grille (“U” versions)
• Pre-assembled for faster installation
• Works with both 70V and 25V amplifier outputs
• Available with volume control – recessed or with
knob (VR and VK models only)
• Screw terminals (BR models only)
• 6 oz. or 0 oz. magnet weights1
Specifications subject to change without notice.
© 2008 Bogen Communications, Inc.
54-7777-08A 0808
S86T725PG8WBR
Description
Bogen’s Ceiling Speaker Assemblies consist of an 8" Cone Speaker (S86 or S81 10) pre-assembled onto a 3"
steel ceiling grille painted with off-white (PG8W) or bright white (PG8U) enamel. Options for these assem-
blies are recessed volume control (VR), volume control with knob (VK), and rear-mounted screw terminal
strip for power taps (BR).
S86T725PG8WVK
Technical
Specifications
Model
Power Taps
(in Watts)
Frequency
Response
Sensitivity
(4 ft./1W)
Magnet Weight
No Volume
Control
Recessed Volume
Control (VR)
Volume Control
w/Knob (VK)
Screw Terminals
(BR)
Off-White (W)
Bright White (U)
Shipping Weight
(6/Carton)
Dimensions
S86T725PG8W
4, 2, 1 1, /2, /4, /81 1
@ 25 & 70V
50 Hz-
12 kHz
95
dBspl 6 oz.
●●
27 lb. /
carton
13" Dia x
3-1/4" D
S86T725PG8WVR ● ●
S86T725PG8WVK ● ●
S86T725PG8WBR ● ● ●
28 lb. /
carton
S86T725PG8WBRVR ● ● ●
S86T725PG8WBRVK ●●●
S86T725PG8U ● ●
27 lb. /
carton
S86T725PG8UVR ● ●
S86T725PG8UVK ● ●
S86T725PG8UBR ● ● ●
28 lb. /
carton
S86T725PG8UBRVR ●●●
S86T725PG8UBRVK ● ● ●
S8 0T725PG8W1
70 Hz-
15 kHz
96
dBspl 10 oz.
● ●
30 lb. /
carton
S810T725PG8WVR ● ●
S810T725PG8WVK ● ●
S8 0T725PG8U1● ●
S810T725PG8UVR ● ●
S810T725PG8UVK ● ●
S86T725PG8W & Variations The loudspeaker assembly shall be a Bogen model S86T725PG8W (or
S86T725PG8WVR S86T725PG8WVK S86T725PG8WBR S86T725PG8WBRVR, , , , or
S86T725PG8WBRVK), or equivalent, 8" cone-type loudspeaker, having a frequency response of at least 50
Hz to 12 kHz. Axial sensitivity shall be 95 dB, measured at -watt/4 feet. The loudspeaker shall have a 6 oz.1
ceramic magnet and a 3/4" voice coil. A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or
70-volt line, and providing power taps of 4, 2, 1 1, /2, 1/4, and /8 watts shall be included. The loudspeaker shall1
be assembled on a 3" steel ceiling grille, finished in off-white semi-gloss enamel. Assembly depth shall be 3-1 1/4".
(For S86T725PG8WVR add) A recessed volume control shall be included.
(For S86T725PG8WVK add) A volume control knob shall be accessible from the front of the grille.
(For S86T725PG8WBR add) A terminal strip shall be included for connection of the audio line.
(For S86T725PG8WBRVR add) A terminal strip shall be included for connection of the audio line.
A recessed volume control shall be included.
(For S86T725PG8WBRVK add) A terminal strip shall be included for connection of the audio line. A vol-
ume control knob shall be accessible from the front of the grille.
S86T725PG8U & Variations The loudspeaker assembly shall be a Bogen model (orS86T725PG8U
S86T725PG8UVR S86T725PG8UVK S86T725PG8UBR S86T725PG8UBRVR, , , , or
S86T725PG8UBRVK), or equivalent, 8" cone-type loudspeaker, having a frequency response of at least 50
Hz to 12 kHz.Axial sensitivity shall be 95 dB, measured at 1-watt/4 feet.The loudspeaker shall have a 6 oz.ceram-
ic magnet and a 3/4" voice coil.A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt
line, and providing power taps of 4, 2, ,1 1/2, 1/4, and 1/8 watts shall be included.The loudspeaker shall be assem-
bled on a 3" steel ceiling grille, finished in bright white semi-gloss enamel. Assembly depth shall be 3-1 1/4".
(For S86T725PG8UVR add) A recessed volume control shall be included.
(For S86T725PG8UVK add) A volume control knob shall be accessible from the front of the grille.
(For S86T725PG8UBR add) A terminal strip shall be included for connection of the audio line.
(For S86T725PG8UBRVR add) A terminal strip shall be included for connection of the audio line.
A recessed volume control shall be included.
(For S86T725PG8UBRVK add) A terminal strip shall be included for connection of the audio line. A volume
control knob shall be accessible from the front of the grille.
S810T725PG8W & Variations The loudspeaker shall be a Bogen model S810T725PG8W (or
S8 S810T725PG8WVR, or 10T725PG8WVK), or equivalent, 8" cone-type loudspeaker, having a frequen-
cy response of at least 70 Hz to 5 kHz. Axial sensitivity shall be 96 dB, measured at -watt/4 feet. The loud-1 1
speaker shall have a 0 oz. ceramic magnet and a " voice coil. A transformer, capable of matching an 8-ohm1 1
loudspeaker to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1 1, /2, 1/4, and /8 watts shall be1
included. The loudspeaker shall be assembled on a 3" steel ceiling grille, finished in off-white semi-gloss enamel.1
Assembly depth shall be 3-1/4".
(For S810T725PG8WVR add) A recessed volume control shall be included.
(For S810T725PG8WVK add) A volume control knob shall be accessible from the front of the grille.
S810T725PG8U & Variations The loudspeaker shall be a Bogen model S810T725PG8U (or
S8 S810T725PG8UVR, or 10T725PG8UVK), or equivalent, 8" cone-type loudspeaker, having a frequency
response of at least 70 Hz to 5 kHz. Axial sensitivity shall be 96 dB, measured at -watt/4 feet. The loudspeaker1 1
shall have a 0 oz. ceramic magnet and a " voice coil. A transformer, capable of matching an 8-ohm loudspeaker1 1
to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1 1, /2, 1/4, and /8 watts shall be included. The1
loudspeaker shall be assembled on a 3" steel ceiling grille, finished in bright white semi-gloss enamel. Assembly1
depth shall be 3-1/4".
(For S810T725PG8UVR add) A recessed volume
control shall be included.
(For S810T725PG8UVK add) A volume control
knob shall be accessible from the front of the grille.
Architect
and Engineer
Specifications
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 201-934-8500; FAX: 20 -934-9832; www.bogen.com1
Ceiling Speaker
Assembly
Variations
No Volume Control RecessedVolume Control - (VR suffix) Volume Control Knob - (VK suffix) Screw Terminal Strip - (BR suffix)
Rear View

Specyfikacje produktu

Marka: Bogen
Kategoria: głośnik
Model: S86T725PG8W

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bogen S86T725PG8W, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Bogen

Bogen

Bogen VRS3 Instrukcja

11 Marca 2025
Bogen

Bogen ASWB1 Instrukcja

1 Marca 2025
Bogen

Bogen AMBSQ1 Instrukcja

1 Marca 2025
Bogen

Bogen AMBSL1 Instrukcja

1 Marca 2025
Bogen

Bogen CSD2X2U-V2 Instrukcja

1 Marca 2025
Bogen

Bogen FG20B Instrukcja

1 Marca 2025
Bogen

Bogen FG20W Instrukcja

1 Marca 2025
Bogen

Bogen MB8TSL(VR) Instrukcja

1 Marca 2025
Bogen

Bogen ACD2X2 Instrukcja

28 Lutego 2025
Bogen

Bogen WMT1AS Instrukcja

11 Grudnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Focal

Focal K2 Power M FRAK Instrukcja

5 Kwietnia 2025
Turbosound

Turbosound PQ12-SB Instrukcja

3 Kwietnia 2025
Trust

Trust Tytan GXT 658 Instrukcja

3 Kwietnia 2025
Turbosound

Turbosound PQ15-YB Instrukcja

3 Kwietnia 2025
Klipsch

Klipsch Synergy KSB-S1 Instrukcja

3 Kwietnia 2025
Klipsch

Klipsch Synergy KSF-10.5 Instrukcja

3 Kwietnia 2025
Klipsch

Klipsch kO-R1 Instrukcja

3 Kwietnia 2025
Klipsch

Klipsch Synergy SB-1 Instrukcja

3 Kwietnia 2025
Klipsch

Klipsch Reference RB-5 II Instrukcja

3 Kwietnia 2025
Klipsch

Klipsch Contractor CS-800-R Instrukcja

3 Kwietnia 2025