Instrukcja obsługi Bogen OCS1


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bogen OCS1 (8 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
© 2003 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-2089-01C 0711
Orbit Ceiling Speaker
OCS1
Installation and Use Manual
Product Description
Thank you for choosing NEAR Orbit Loudspeakers. You have purchased one of the®
finest ceiling loudspeakers available today, the NEAR Model OCS . Please familiarize1
yourself with this product by reading and reviewing the descriptions and diagrams in
this manual.
All NEAR products include similar technical and design aspects that are unique to
the market. NEAR invented and patented the "spiderless" woofer (MLS™), which
features a high-gauss ferrofluid to guide the voice coil through the magnetic field. The
benefits over conventional woofers with cloth spiders are several, including the
ability to constantly adjust voice coil alignment, extend linear excursion, and the
most efficient path for cooling the voice coil.
In addition, the use of metal-alloy cone structures provides several benefits over the
usual paper or plastic cone, such as elimination of cone flex or "break-up" in the
operating ranges, additional thermal path for the voice coil to stay cool, and an
extremely stable cone structure unaffected by changes in temperature.
The NEAR OCS Ceiling Loudspeaker is a full-range, wide dispersion system providing1
high-quality background and foreground music. It can be installed in either suspended
ceiling structures or hard surfaces such as sheetrock. It comes ready to install with
integral swinging arm clamps. An optional mounting bracket (TBCR) is available for
additional support (recommended for all suspended ceiling applications). The brack-
et can also be used for new construction ceilings, providing a cutout guide behind
the sheetrock surface and as a C-ring to stiffen the edges of the cutout opening.
A variety of speaker power levels are easily selected via a front panel rotary switch.
Settings for both 70V and 00V high-impedance systems, as well as a low-impedance1
(16-ohm) position, are provided.
The OCS features a removable snap-lock input connector, providing easy wire 1
connection for input as well as loop-through to the next speaker.
IMPORTANT
The OCS is not an outdoor speaker. Do not expose the speaker to rain or 1
moisture. The OCS1should be installed by qualified personnel.
Product Diagrams
OCS1Front Drawing (grille removed)
1. Coaxial Driver Assembly
2. Bass Tuning Vents (x2)
3. Grille Retention Groove
4. Power Tap Selection Switch
5. Mounting Clamp Screws (x4)
OCS1Rear Drawing
6. Metal Back Can
7. Snap-Lock Input Connector
8. Mounting Clamps (x4)
OCS1Rear Drawing (terminal cover)
9. Terminal Covers (2 identical halves)
10. Eyelets (x2)
11. Mounting Screws (x4)
12. Wire Exit Slot
13. Conduit Knock Out (x2)
OCS1Front Drawing
(grille removed)
OCS1Rear Drawing
OCS1Rear Drawing
(terminal cover)
1


Specyfikacje produktu

Marka: Bogen
Kategoria: głośnik
Model: OCS1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bogen OCS1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Bogen

Bogen

Bogen WMT1AS Instrukcja

11 Grudnia 2024
Bogen

Bogen CSD1X2 Instrukcja

30 Września 2024
Bogen

Bogen AE-2s2 Instrukcja

29 Września 2024
Bogen

Bogen NEAR S5T Instrukcja

23 Września 2024
Bogen

Bogen CSD2X2 Instrukcja

20 Września 2024
Bogen

Bogen KFLDS30T Instrukcja

20 Września 2024
Bogen

Bogen G8G Instrukcja

20 Września 2024
Bogen

Bogen IG8s2M Instrukcja

19 Września 2024
Bogen

Bogen MB8TSL Instrukcja

18 Września 2024
Bogen

Bogen HFSF1 Instrukcja

18 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik