Instrukcja obsługi Bogen NEAR S5T

Bogen głośnik NEAR S5T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bogen NEAR S5T (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Description
Features
High sensitivity and exceptional power handling
Two models: S5 for 8 ohms; S5T for 70V & 8 ohms
150W at 8 ohms (S5 & S5T)
70V Power settings: 32, 16, 8, 4, 2, 1 watts (S5T Only)
Hemispherical mounting system makes it simple to
mount, aim, and lock-in position of loudspeaker
5-1/4” metal-alloy MDTTM mid/bass speaker cone is
extremely stable in all environments
Patented MLSTM Ferrofluid voice coil centering replaces
distortion-causing mechanical spider and seals
magnet gap
Professional Grade 1-1/2” diameter woofer voice coil
provides higher output level and ultra-low distortion
1” horn-loaded titanium high frequency driver delivers
clear, articulate response and consistent long-term
performance
Wide, even coverage over listening area
High-density, injection-molded cabinet provides an
exceptional cosmetic finish
Low-resonance cabinet structure
Precisely designed low-frequency tuning for proper
balance
Advanced polymer compound cone surrounds resist UV
rays, chemicals, and salt spray
Aluminum-alloy & Titanium cones, UV-protected ABS
cabinets, and powder-coated aluminum grilles and
mounting brackets assure long-term cosmetic
and sonic durability
Pressure clamping input terminals for quick installation
The S5 & S5T compact, versatile speakers feature NEARʼs unique
driver technologies to produce the highest sound quality in the most
durable and reliable loudspeakers available. Precise sound repro-
duction is achieved with mid/bass drivers employing NEARʼs MDTTM
and patented MLS
TM technologies for superior sound and long-term
durability. The high-frequency driver is a 1” titanium diaphragm
which perfectly complements the metal-alloy LF driver. A built-in
32W transformer (S5T) makes it compatible with 70V sound
systems. The S5T speaker can switch between 70V or low-imped-
ance systems by using a power tap selection switch. NEARʼs
patented spiderless technology (MLS
TM) and advanced materials
deliver out-of-the-box performance year after year.
Unique MDT™ (Metal Diaphragm Technology):
High rigidity and low mass of metal versus traditional papers
and plastics (extremely stable cone structure over long
periods of time)
Fast transmission of sound through the diaphragm means
low energy storage
Special anodizing process creates a ceramic coating for
increased stiffness
Efficient heat-sinking of voice coils under long-term,
high-power situations
Speaker diaphragms are manufactured with materials that
will not be altered by constant exposure to UV rays or water,
cold or heat, or extremely high or low humidity
Patented MLS™ (Magnetic Liquid Suspension):
Voice coil is constantly centered for lower distortion
Voice coil is more efficiently heat-sinked by fluid instead of air
Greater linearity is accomplished because the mechanical
spider is eliminated
Constant lubrication of the gap prevents oxidation from
humid environments
High-Performance
Foreground Loudspeakers
Models S5/S5T
Specifications subject to change without notice.
© 2010 Bogen Communications, Inc.
54-8023-50B 1010
Technical
Specifications
The loudspeaker shall be NEAR Model S5 or S5T with
a power handling capacity of 150 watts @ 8 ohms, or
32W @ 70V input (S5T), or approved equivalent. The
loudspeaker shall consist of one 5-1/4 inch metal-alloy
low-frequency diaphragm transducer and one horn-
loaded 1-inch titanium high-frequency diaphragm
transducer. A crossover network provides dividing and
smoothing of frequencies between the transducers.
A mathematically-aligned and vented molded enclosure
shall house all components. High-density ABS cabinet
material and powder-coated aluminum grille material will
assure long-term cosmetic stability.
The high-frequency driver shall utilize a rigid titanium
diaphragm and integral compounded rubber surround
for proper damping and long-term reliability.
The low-frequency driver shall utilize a metal-alloy
diaphragm with deep-anodized surface treatment for
rigidity and corrosion resistance. The cone shall provide
a heat transfer thermal path for the voice coil under
high-power inputs. Compounded rubber cone surrounds
shall be formulated to provide a high degree of damping
and long-term performance without decay.
The voice coil will be centered via a high gauss, low
viscosity magnetic fluid (Ferrofluid), which increases
the heat transfer efficiency from the voice coil to the
speakerʼs mechanical structure under long-term high-
power use. The magnetic fluid shall provide corrosion
resistance in the magnet gap.
The mounting bracket provided with the speaker shall
be designed to provide angular movement horizontally
and vertically to facilitate proper directional coverage. It
shall allow both vertical and horizontal orientation of the
loudspeaker. The bracket shall be formed from cast
metal-alloys with a scratch-resistant, powder-coated
finish. The input connectors for 8-ohm and 70V systems
shall be via a positive pressure-clamping device to facil-
itate connection of the speaker input wires.
Dimensions of the speaker shall not exceed 6-7/8” W x
9-3/4” H x 6-1/8” D without the bracket attached;
or, 6-7/8 W x 9-3/4 H x 8-1/8 D with the bracket
attached. Weight shall not exceed 8 lbs. for the S5,
or 9 lbs. for the S5T.
Architect & Engineer
Specifications
Models S5/S5T
Frequency Response (-10dB)*: 48 Hz to 17 kHz
Low-Frequency DesignMetal-Composite Cone
5-1/4” Nominal Dia.
Utilizing MLS Voice Coil Guidance System
High-Frequency Driver Titanium Cone: 1” Horn-Loaded
Sensitivity (1W/1m, Avg. 100 Hz - 15 kHz): 89dB SPL
Dispersion
Horizontal:
130 Degrees
Vertical:
110 Degrees
Impedance Ratings
Low:
Only (S5 version)
High:
70V and (S5T version)
Power Input (Maximum) 150W@ 8 ohms
Additional Taps: 32, 16, 8, 4, 2, 1 watts
Product Weight: S5: 8 lbs. / S5T: 9 lbs.
Speaker Dimensions (WxHxD)
Without Bracket:
6-7/8” H x 9-3/4” H x 6-1/8” D
With Bracket:
6-7/8” H x 9-3/4” H x 8-1/8” D
Enclosure Material: ABS
Product Color: White (“W” suffix) and Black (“B” suffix)
Mounting Bracket Material: Aluminum Alloy, Powder-Coated Finish
Grille Material: Perforated Aluminum, Powder-Coated Finish
Terminations: Pressure Clamp
Included Accessories: Color-Matched Mounting Bracket
Optional Accessories: Safety Cable CK10
*Half-Space Response
Horizontal
Polar
Response
Vertical
Polar
Response
Frequency
Curves
Response
-6-12-18-24-30-36 0
30
60
90
120
150
180
210
240
270
300
330
500 Hz
1000 Hz
2000 Hz
4000 Hz
8000 Hz
16000 Hz
0
30
60
90
120
150
180
210
240
270
300
330
-6-12-18-24-30-36
20 100 1K 10K200 500 2K 5K 20K (Hz)
(dBspl)
70
80
90
100
110
Half Space @ 1m
2W
4W
8W
8 Ω / 1W
16W
32W
-6
-12
-18
-24
-30
-36
0
30
60
90
120
150
180
210
240
270
300
330
500 Hz
1000 Hz
2000 Hz
4000 Hz
8000 Hz
16000 Hz
-6
-12
-18
-24
-30
-36
0
30
60
90
120
150
180
210
240
270
300
330
TOP
TOP
TOP TOP
TOP


Specyfikacje produktu

Marka: Bogen
Kategoria: głośnik
Model: NEAR S5T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bogen NEAR S5T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Bogen

Bogen

Bogen CSD1X2 Instrukcja

30 Września 2024
Bogen

Bogen AE-2s2 Instrukcja

29 Września 2024
Bogen

Bogen NEAR S5T Instrukcja

23 Września 2024
Bogen

Bogen CSD2X2 Instrukcja

20 Września 2024
Bogen

Bogen KFLDS30T Instrukcja

20 Września 2024
Bogen

Bogen G8G Instrukcja

20 Września 2024
Bogen

Bogen IG8s2M Instrukcja

19 Września 2024
Bogen

Bogen MB8TSL Instrukcja

18 Września 2024
Bogen

Bogen HFSF1 Instrukcja

18 Września 2024
Bogen

Bogen IH8A Instrukcja

18 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024