Instrukcja obsługi Bogen HFCS1LP

Bogen głośnik HFCS1LP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bogen HFCS1LP (8 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
© 2006 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-2091-01E 1302
High-Fidelity
Ceiling Speakers
Models
HFCS1 & HFCS1LP (Off-white),
HFCS1B & HFCS1LPB (Black)
Installation and Use Manual
Product Description
Bogen’s coaxial 2-way hi-fi ceiling speakers deliver unsurpassed performance and value. The
steel back can and front exit venting allow for deep bass response, enhancing the quality and
intelligibility of both speech and music. The HFCS LP uses a smaller, low-profile back can that1
allows for a greater range of installations. The speakers are available with off-white finish or
black finish (B versions).
Both speakers can be installed either in suspended ceiling structures or hard
surfaces (such as sheetrock). They come ready to install with integral swinging arm clamps.
An optional mounting bracket (TBCR) is available for additional support (recommended for
all suspended ceiling applications). The bracket can also be used for new construction ceilings,
providing a cutout guide behind the sheetrock surface and as a C-ring to stiffen the edges of
the cutout opening.
A variety of speaker power levels are easily selected via a front panel rotary switch. Settings
for both 70V and 100V high-impedance systems, as well as a low-impedance (16-ohm)
position, are provided.
The speakers feature a removable snap-lock input connector, providing easy wire connection
for input as well as loop-through to the next speaker.
IMPORTANT
The HFCS LP(B) are not outdoor speakers. Do not expose1 and 1(B) HFCS
the speakers to rain or moisture. The HFCS LP(B) should1 and 1(B) HFCS
only be installed by qualified personnel.
Always follow these basic safety precautions when installing and using the unit:
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean unit with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade, or the third prong, are provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer. An operation manual is
provided with the product.
12. Unplug this apparatus during lightning storms or when not used for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
Product Diagrams
Front Drawing (grille removed)
1. Coaxial Driver Assembly
2. Bass Tuning Vents (x2, HFCS1;
x1, HFCS1LP)
3. Grille Retention Groove
4. Power Tap Selection Switch
5. Mounting Clamp Screws (x4)
Rear Drawing
6. Metal Back Can
7. Snap-Lock Input Connector
8. Mounting Clamps (x4)
Rear Drawing (terminal cover)
9. Terminal Covers (2 identical halves)
10. Eyelets (x2)
11. Mounting Screws (x4)
12. Wire Exit Slot
13. Conduit Knockout (x2)
Front Drawing
(grille removed)
Rear Drawing
Rear Drawing
(terminal cover)
1

Specyfikacje produktu

Marka: Bogen
Kategoria: głośnik
Model: HFCS1LP

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bogen HFCS1LP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Bogen

Bogen

Bogen WMT1AS Instrukcja

11 Grudnia 2024
Bogen

Bogen CSD1X2 Instrukcja

30 Września 2024
Bogen

Bogen AE-2s2 Instrukcja

29 Września 2024
Bogen

Bogen NEAR S5T Instrukcja

23 Września 2024
Bogen

Bogen CSD2X2 Instrukcja

20 Września 2024
Bogen

Bogen KFLDS30T Instrukcja

20 Września 2024
Bogen

Bogen G8G Instrukcja

20 Września 2024
Bogen

Bogen IG8s2M Instrukcja

19 Września 2024
Bogen

Bogen MB8TSL Instrukcja

18 Września 2024
Bogen

Bogen HFSF1 Instrukcja

18 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025
Hifonics

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025
Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
ION

ION Insta Sound Instrukcja

15 Stycznia 2025
Pure Acoustics

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025
Yamaha

Yamaha WX-010 Instrukcja

15 Stycznia 2025
Polk

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025
Sennheiser

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025