Instrukcja obsługi Blomberg WDT 5431

Blomberg Wasmachine WDT 5431

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blomberg WDT 5431 (8 stron) w kategorii Wasmachine. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
WDT 5431
Uputstvo za upotrebu
Perilica-sušilica
sa gornjim punjenjem
2
Full programming (combined with drying or not) Lights and/or display
Programming
Ein / Aus
Vorwäsche
Extra
spülen
Start / Pause
Schleudern
Startzeit
Trockenzeit
Bügelleicht
Energie sparen
Intensiv
ƈ
Waschen Trocknen Knitterschutz
R
On/Off
Cycle progress Display
Type of washing and temperature
AB1
Selector for the spin speed,
drying and
delay start functions
Spin speed,drying time
and delay start setting
Start/Pause: press briefly
Cancelled: long press
Sleekare, Eco, Intensive wash options
Prewash, Rinse Plus options
2 R 3 4 5
Press in the «On/Ofbutton
(Ein/Aus)
(1).
Turn the selector to select the programme and the washing
temperature. The machine proposes the recommended spin speed for
the type of textile selected.
Use the setting button
:
-
Either to alter the proposed spin speed.
-
Or to select stopping with the drum full of water.
The machine will stop with the drum full of water before the final spin.
• Select, or not, any of the following options:
- «Prewash» (Vorwäsche) and/or «Rinse Plus» (Extra Spülen) via button
- «Sleekare» (Bügelleicht) and/or «ECO» (Energie sparen) and «Intensiv
(Intensiv) via button
- Subsequent immediate drying via button then, via button , set the desired
drying time (for the washing load to be dried, see the Programmes table)
Select immediate start by pressing the «Start/Pausbutton
...
... Or select a start delayed by 1 - 19 hours by using button to select this
option (Startzeit) and then using button to set the period of the delay.
R
3
2
R3
5
4
R
1Light
«Schleudern»
+
spin speed
recommended on
Light
«Schleudern»
+ e.g.:
or
+ selected options
+ «Trockenzeit»
+ e.g.
Light
«Waschen»
+
display of washing
time remaining
Light
«Startzeit»
+ display of time
remaining before the
cycle starts
A
A
A
Apart from the «On/Ofbutton (Ein/Aus), all the buttons are sensitive and therefore do not remain
depressed.
During programming, all the buttons except for «Start/Pause» can be kept depressed but, for more precise
adjustment, we recommend that you operate them with a series of brief presses.
You should operate the «Start/Pausby pressing it briefly except when cancelling the programme, in
which case it should be kept depressed.
(*) Details of the function are provided in the following pages.
If one of the cycle progress lights is lit when you switch on, cancel before carrying out any other
operation.
Warning: the «On/Off» button cannot cancel a programme.
B
• Press in the «On/Of button (Ein/Aus).
Turn the selector to select a normal (Intensiv Trocknen) or mixed
(Schonen Trocknen) drying programme to suit your type of washing
Select the «Sleekar option (gelleicht), or not, via button . This
option finishes your programme with a 2 hour «Resting» period (see
Function Details)
Set the desired time via button (only dry washing that has been
spun at least at 800 rpm)
• Select immediate start by pressing the «Start/Pause» button ...
• ... Or select a start delayed by 1 - 19 hours by using button to select
this option and then using button to set the period of
R
3
2
R
5
1
3
Light
«Trockenzeit»
and selected option
+ e. g.
Light
«Trocke
+ countdown of the remaining
cycle time on
or
display of time remaining
before the cycle starts
A
A
Programming a Drying Only cycle:
After spinning, the machine positions the drum automatically
with the opening at the top to help you in removing your
laundry. This operation takes 3 minutes at most.
Then the message «-0-» appears on the display, indicating the
end of the cycle (2).
Wait a moment of two for the lid to unlock so that you can
remove your laundry. Release the «On/Ofbutton
(Ein/Aus)
(3).
Full programming (continued):Lights and/or display
Programming
For more information, please refer to the section on «DETAILS OF THE FUNCTIONS».
Important: If you have stopped your machine by pressing the «On/Off» button (Ein/Aus) or after a power failure,
when the power is restored the washing cycle automatically returns to the point at which it was interrupted.
Maintaining your washing machines performance:
At the end of the cycle, you must clean the dryer filter (see the Chapter on “RUNNING MAINTENANCE”).
• Press the «Start/Pausbutton to interrupt the cycle.
Add or remove the items of laundry.
• Press the «Start/Pausbutton to restart the cycle.
(*) The lid may take 1-2 minutes to unlock
If you have selected a «Delay Start», you can instantaneously access
the drum at any time during the phase before the washing cycle starts,
without having to interrupt and restart the cycle.
2
2Flashing light
+
counter stopped
Light permanently lit
+
counter restarts
A
B
A
B
Adding or removing an item during the cycle(impossible during spin):
Cancelling during programming or washing or during a pause:
Hold down the «Start/Pausbutton for at least 1 second.
This can be done at any time during the cycle or during
programming, or even during a pause.
If you do this while the machine is waiting to start during a delay start,
only the delay start is cancelled.
2Return to initial display
(1) -
Before starting your machine, check that the power cable is plugged in and the water
tap is open. Also ensure that the drum doors and the lid are firmly closed.
(2) - During the «end of cycle» phase, the machine will not recognize your pressing one of
the , , , or buttons but does allow you to return to «programming» mode.
(3) - As a safety measure, it is advisable to unplug the power cable and turn off the water tap.
R5432

Specyfikacje produktu

Marka: Blomberg
Kategoria: Wasmachine
Model: WDT 5431

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Blomberg WDT 5431, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Wasmachine Blomberg

Instrukcje Wasmachine

Najnowsze instrukcje dla Wasmachine

Rex

Rex POCKET630T Instrukcja

4 Października 2024
Rex

Rex JET600L Instrukcja

4 Października 2024
Rex

Rex M42TX Instrukcja

4 Października 2024
Rex

Rex R42TX Instrukcja

4 Października 2024
Whirlpool

Whirlpool FFB10658BEVF Instrukcja

4 Października 2024
Rex

Rex RL654 Instrukcja

4 Października 2024
LG

LG F1081TD5 Instrukcja

4 Października 2024
Rex

Rex RI1200MX Instrukcja

4 Października 2024
Beko

Beko B3D58545UW Instrukcja

4 Października 2024
Rex

Rex M62TX Instrukcja

4 Października 2024