Instrukcja obsługi Black & Decker VP510T
Black & Decker
szlifierka
VP510T
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker VP510T (18 stron) w kategorii szlifierka. Ta instrukcja była pomocna dla 29 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/18
EN G L I S H
1
WARNING: IMPORTANT SAFETY WARNINGS
AND INSTRUCTIONS
TO REDUCE RISK OF INJURY:
• Before any use, be sure everyone using this tool reads and understands all
safety instructions and other information contained in this manual.
• Save these instructions and review frequently prior to use and in instructing
others.
•WARNING: When using electric tools, basic safety precautions should
always be followed to reduce risk of fire, electric shock, and
personal injury, including the following.
READ ALL INSTRUCTIONS
GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL TOOLS
NOTE: Refer to battery and/or charger manual for battery and charger safety and
usage information.
•KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.
•CONSIDER WORK AREA ENVIRONMENT. Keep work area well lit. Do not use
tool in presence of flammable liquids or gases. Motors in these tools normally
spark, and the sparks may ignite the fumes.
•GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded
surfaces. For example; pipes, radiators, ranges, and refrigerator enclosures. Do
not contact any exposed electrical terminals with the tool. Use extreme caution
when drilling, driving or cutting into walls, floors ceilings or other areas or
wherever live electrical wires may be encountered, DO NOT TOUCH ANY
METAL PARTS OF THE TOOL. Hold the tool only by the plastic handle to
prevent electric shock.
•KEEP CHILDREN AWAY. Do not permit children and visitors to contact the tool.
All children and visitors should be kept away from work area.
•STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high or
locked-up place — out of reach of children.
•DON’T FORCE TOOL. It will do the job better and safer at the rate for which it
was intended.
•USE RIGHT TOOL. Don’t force small tool or attachment to do the job of a heavy-
If you have any questions, call 1-800-54-HOW-TO
KEY INFORMATION YOU SHOULD KNOW:
• Charge batteries before first use.
•Charger may hum; batteries or charger may become warm
while charging (batteries and charger sold separately).
• Not for use on drywall or plaster.
• Ensure sandpaper is correctly installed before using.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
POUR LE FRANÇAIS, VOIR LA COUVERTURE ARRIÈRE.
1-800-762-6672
INSTRUCTION
MANUAL
7.2 Volt Cordless Detail
Sander
VP510
SAVE THIS
MANUAL FOR
FUTURE REFERENCE.
If you have any questions,
call 1-800-762-6672
R
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
380850/VP510 5/1/02 11:00 AM Page 1
3
Sandpaper
Papier abrasif
Papel de lija
Platen
Plaque
Platina
4
5
Release Buttons
Boutons de dégagement
Botones de liberación
380850/VP510 5/1/02 11:00 AM Page 2
3
duty tool. Don’t use tool for purpose not intended — for example — don’t use
circular saw for cutting tree limbs or logs.
•DRESS PROPERLY. Do not wear loose clothing or jewelry. They can be caught
in moving parts. Rubber gloves and non-skid footwear are recommended when
working outdoors. Wear protective hair covering to contain long hair.
•USE SAFETY GLASSES. Also use face or dust mask if tool operation is dusty.
•SECURE WORK. Use clamps or a vise to hold work. It’s safer than using your
hand and it frees both hands to operate tool.
•DON’T OVERREACH. Keep proper footing and balance at all times.
•MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories.
Inspect tool periodically and if damaged, have repaired by authorized service
facility only. Keep handles dry, clean, and free from oil and grease.
•DISCONNECT/LOCK OFF TOOLS when not in use, before servicing, and when
changing accessories, such as blades, bits, cutters.
•REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see
that keys and adjusting wrenches are removed from tool before turning it on.
•AVOID UNINTENTIONAL STARTING. Don’t carry tool with finger on switch. Be
sure switch is in the off position (lock off if available) when carrying.
•STAY ALERT. Watch what you are doing. Use common sense. Do not operate
tool when you are tired or otherwise impaired.
•CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part
that is damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and any other conditions
that may affect its operation. A guard or other part that is damaged should be
properly repaired or replaced by an authorized service center unless otherwise
indicated elsewhere in this instruction manual. Have defective switches replaced
by authorized service center. Do not use tool if switch does not turn it on and off.
•REPAIRS AND SERVICE. Repairs, maintenance and adjustment should be
performed by authorized service centers or other qualified service organizations,
always using identical replacement parts.
•THE USE OF OTHER ACCESSORIES. The use of any other accessory not
recommended for use with this tool could be hazardous.
IMPORTANT SAFETY INSTRUCTIONS (FOR BATTERY AND CHARGER)
WARNING: When using electric tools, basic safety precautions should
always be followed to reduce risk of fire, electric shock, and personal injury,
including the following:
READ ALL INSTRUCTIONS
• Do not store or carry battery so that metal objects can contact exposed metal end
shown in Figure 1. For example, do not place battery in aprons, pockets, tool
boxes, drawers etc. with loose nails, screws, keys, etc. without battery cap.
Battery could short circuit causing fire or burns or damage to battery.
• Battery caps are provided for use when carrying batteries or while battery is
stored in a pocket, tool box, etc. Remove cap before placing battery in charger or
tool (see Figure 2).
• Never attempt to open the battery for any reason. If the housing of the battery
breaks or cracks, immediately discontinue use and do not recharge.
• Do not incinerate the batteries. They can explode in a fire. A small leakage of
liquid from the battery cells may occur under extreme usage, charging or
temperature conditions. This does not indicate a failure. However, if the outer
seal is broken and this leakage gets on your skin:
a. Wash quickly with soap and water.
b. Neutralize with a mild acid such as lemon juice or vinegar.
c. If the battery liquid gets in your eyes, flush them with clean water for a minimum
of 10 minutes and seek immediate medical attention.
MEDICAL NOTE: The liquid is a 25-35% solution of potassium hydroxide.
STORAGE &
CARRYING
CAP
STORAGE &
CARRYING
CAP
Battery Cap
Metal End
If you have any questions, call 1-800-54-HOW-TO
EN G L I S H
1
380850/VP510 5/1/02 11:00 AM Page 3
Specyfikacje produktu
| Marka: | Black & Decker |
| Kategoria: | szlifierka |
| Model: | VP510T |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Black & Decker VP510T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje szlifierka Black & Decker
8 Października 2024
29 Września 2024
23 Września 2024
19 Września 2024
13 Września 2024
12 Września 2024
5 Września 2024
27 Sierpnia 2024
25 Sierpnia 2024
24 Sierpnia 2024
Instrukcje szlifierka
- szlifierka AEG
- szlifierka Worx
- szlifierka Kawasaki
- szlifierka Milwaukee
- szlifierka Bosch
- szlifierka Yato
- szlifierka Parkside
- szlifierka Global
- szlifierka Toolcraft
- szlifierka Festool
- szlifierka Bavaria By Einhell
- szlifierka SW-Stahl
- szlifierka Stanley
- szlifierka Mirka
- szlifierka Scheppach
- szlifierka Proxxon
- szlifierka Adler
- szlifierka Hazet
- szlifierka RIKON
- szlifierka DeWalt
- szlifierka Einhell
- szlifierka Silverline
- szlifierka ECG
- szlifierka Makita
- szlifierka Ozito
- szlifierka RYOBI
- szlifierka Chicago Pneumatic
- szlifierka Flex
- szlifierka GO/ON
- szlifierka DEDRA
- szlifierka Hilti
- szlifierka Rodcraft
- szlifierka Dremel
- szlifierka Handwerk
- szlifierka Meec Tools
- szlifierka Güde
- szlifierka Bavaria
- szlifierka Solo
- szlifierka DURO PRO
- szlifierka McKenzie
- szlifierka Westfalia
- szlifierka Fein
- szlifierka Ferm
- szlifierka Hitachi
- szlifierka Craftsman
- szlifierka Fieldmann
- szlifierka Ridgid
- szlifierka PowerPlus
- szlifierka Alpha Tools
- szlifierka Vonroc
- szlifierka Powerfix
- szlifierka HiKOKI
- szlifierka Workzone
- szlifierka Proviel
- szlifierka Porter-Cable
- szlifierka Metabo
- szlifierka Skil
- szlifierka ABB
- szlifierka Aquapur
- szlifierka Toolland
- szlifierka Profitec
- szlifierka United Office
- szlifierka Maktec
- szlifierka Steren
- szlifierka Bort
- szlifierka Tanaka
- szlifierka Yamato
- szlifierka Malmbergs
- szlifierka Power Craft
- szlifierka Bunn
- szlifierka Eibenstock
- szlifierka Gamma
- szlifierka Kress
- szlifierka Dolmar
- szlifierka Duro
- szlifierka Pattfield
- szlifierka Defort
- szlifierka Max
- szlifierka Truper
- szlifierka Bruder Mannesmann
- szlifierka Meister Craft
- szlifierka Batavia
- szlifierka Holzmann
- szlifierka Graphite
- szlifierka Stomer
- szlifierka Dolmar(Makita)
- szlifierka Sthor
- szlifierka Ergofix
- szlifierka Neo
- szlifierka Victoria Arduino
- szlifierka Felisatti
- szlifierka ATI-ZDL
- szlifierka Gude Pro
- szlifierka Einhell Bavaria
- szlifierka Gladiator
Najnowsze instrukcje dla szlifierka
15 Października 2024
14 Października 2024
14 Października 2024
12 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024