Instrukcja obsługi Black & Decker BDL300S

Black & Decker wskaźnik laserowy BDL300S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker BDL300S (16 stron) w kategorii wskaźnik laserowy. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

VEA EL ESPAÑOL EN LA CONTRAPORTADA.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.

ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

INSTRUCTION

MANUAL

336

660

00˚

˚˚

AAu

uut

tto

LLa

aas

sse

eer

LLe

eev

vve

eel

BEFORE RETURNING THIS PRODUCT

FOR ANY REASON PLEASE CALL

1-800-544-6986

IF YOU SHOULD HAVE A QUESTION OR EXPERIENCE A

PROBLEM WITH YOUR BLACK & DECKER PRODUCT,

CALL 1-800-544-6986

BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No., TYPE No., AND

DATE CODE (e.g. 20000130M). IN MOST CASES, A REPRESENTATIVE CANBLACK & DECKER

RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU HAVE ASUGGESTION OR COMMENT, GIVE

US A CALL. YOUR FEEDBACK IS VITALTO BLACK & DECKER.

Catalog No.

BDL300S

586017-00 BDL300S laser 7/30/03 8:51 AM Page 1

WARNING: Read and understand all

instructions. Failure to follow all

instructions listed below may result in

electric shock, fire and/or serious personal

injury.

SAVE THESE INSTRUCTIONS

Safety Instructions

• Do not operate the laser in explosive

atmospheres, such as in the presence of

flammable liquids, gases, or dust.

• Use the laser only with the specifically

designated batteries. Use of any other

batteries may create a risk of fire.

• Store idle laser out of reach of children

and other untrained persons. Lasers are

dangerous in the hands of untrained

users.

• Use only accessories that are

recommended by the manufacturer for

your model. Accessories that may be

suitable for one laser, may create a risk of

injury when used on another laser.

• Do not use optical tools such as a

telescope or transit to view the laser

beam. Serious eye injury could result.

• Do not place the laser in a position which

may cause anyone to intentionally or

unintentionally stare into the laser beam.

Serious eye injury could result

• Turn the laser off when it is not in use.

Leaving the laser on increases the risk of

staring into the laser beam.

• Repairs and servicing MUST be

performed by a qualified repair facility.

Repairs performed by unqualified

personnel could result in serious injury.

• WARNING: DO NOT DISASSEMBLE

THE LASER. There are no user

serviceable parts inside. Disassembling

the Laser will void all warranties on the

product. Do not modify the product in any

way. Modifying the tool may result in

Hazardous Laser Radiation Exposure.

• Do not operate the laser around children

or allow children to operate the laser.

Serious eye injury may result.

• Do not remove or deface warning labels.

Removing labels increases the risk of

exposure to radiation.

• Position the laser securely. Damage to the

laser or serious injury could result if the

laser falls.

• CAUTION: Use caution when drilling,

nailing or cutting into walls, floors and

ceilings which may contain electrical

wiring or pipes. Always turn off the

power when working near electrical

wires.

CAUTION: Use of controls or

adjustments or performance of procedures

other than those specified in this manual

may result in hazardous laser radiation

exposure.

The label on your tool may include the

following symbols.

V ................................volts

mW ............................milliwatts

nm..............................wavelength in

..................................nanometers

IIIa..............................Class IIIa Laser

For your convenience and safety, the

following labels are on your laser.

586017-00 BDL300S laser 7/30/03 8:51 AM Page 2

INSTALLING THE BATTERY

Ensure laser on/off switch is in the left “OFF” position.

Remove the battery compartment cover by pressing the

tab of the cover in towards the center of the laser and out

as shown in figure 3. Connect a fresh 9 volt alkaline

battery making sure to match (+) and (-) terminals

correctly. Replace the battery compartment cover.

ASSEMBLY / SET-UP

UNFOLDING THE LASER LEGS

To open the 360° Laser:

1.) Choose a relatively smooth and level surface away

from other work site activity to position the tripod.

2.) Unfasten the strap that is around the outside portion of

the laser and unfold the three sections of the laser

housing which become the legs of the tripod.

3.) Lock the legs in place, by pushing in on the top portion

of the hinge until it snaps into place as shown in figure 4.

CAUTION: Make sure tripod is secure and sitting

on a flat and stable surface.

ADJUSTING THE TRIPOD

The tripod is adjustable from its

lowest position of approximately 27

inches (686mm) shown in figure 5 to

a maximum height of 5 feet

(1524mm) shown in figure 6.

Extend any or all of the 5 sections of the tripod to reach the

approximate desired height. Extend each section by gently sliding

each tube out until it stops and then pull slightly harder on each

section to lock.

When the approximate desired height is obtained, use the fine

adjust knob shown in figure 8 to raise the laser to the final desired

height. The fine adjustment knob will raise the laser up to an

additional 7 inches (178mm) high.

First, loosen the lock knob as shown in figure 7.

Turn the fine adjust knob (figure 8) until the desired height is

reached. Tighten the lock knob (fig. 7) to secure the tripod at the

adjusted height.

Lock Knob

Fine Adjust

Knob

586017-00 BDL300S laser 7/30/03 8:51 AM Page 3

Specyfikacje produktu

Marka:	Black & Decker
Kategoria:	wskaźnik laserowy
Model:	BDL300S
Kolor produktu:	Czarny
Formaty kompresji:	H.264,M-JPEG,MPEG4
Pojemność pamięci wewnętrznej:	2048 MB
Procesor wbudowany:	Intel® Core™2 Quad
Liczba kanałów:	16 kan.
Taktowanie procesora:	2000 Mhz
Wymiary produktu (SxGxW):	440 x 552 x 180 mm
Zasilanie:	100 - 240V, 50/60 Hz
Rodzaj interfejsu sieci Ethernet:	Gigabit Ethernet
Dołączone oprogramowanie:	Windows XP
Obsługiwane protokoły sieciowe:	TCP/IP, UDP
Pojemność HDD:	8192 GB
Wejścia BNC:	16