Instrukcja obsługi Bionaire BASF1516

Bionaire Wentylator BASF1516

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bionaire BASF1516 (52 stron) w kategorii Wentylator. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/52
Belgium: +32 38 70 86 86
Czech Republic: +420 48 513 03 03
Finland: +358 207 599 860
Germany: +49 89 5480195-0
Hungary: +36 1 37 17 970
Latvia +371 7514081
Lebanon: +961 1 81 49 46
Lithuania +370 52 772388
Netherlands: +31 79 36 37 310
Norway: +47 55982770
Poland: +48 23 662 68 01
Slovakia: +421 41 723 47 09
Spain: +34 902 051 045
Sweden: +46 300567370
Turkey: +90 212 210 99 14
United Arab Emirates: +971 42 97 95 52
Holmes Products (Europe) Ltd.
1 Francis Grove
London SW19 4DT
England
Fax: +44 (0)20 8947 8272
Email: enquiriesEurope@jardencs.com
Website address: www.bionaire.com/europe
UK - Free phone Customer Service Helpline – 0800 052 3615
Holmes Products France
1015, Rue du Maréchal Juin
Z.I Vaux - Le - Pénil
77000 Melun – France
Phone: +33 1 64 10 45 80
Fax: +33 1 64 10 02 32
FRANCE - SERVICE CONSOMMATEURS
0 825 85 85 82
English 2
Français/French 4
Deutsch/German 7
Español/Spanish 11
Nederlands/Dutch 14
Svenska/Swedish 17
Suomi/Finnish 20
Norsk/Norwegian 23
Dansk/Danish 26
Polski/Polish 29
EKKHNIKA/Greek 32
РУССКИЙ/Russian 35
Italiano/Italian 39
Magyar/Hungarian 42
Česká Republika/Czech Republic 45
Português/Portuguese 48
© 2010 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved.
Distributed by Holmes Products (Europe) Ltd., 1 Francis Grove, London SW19 4DT, United Kingdom. Printed in PRC
© 2010 Sunbeam Products, Inc. faisant affaires sous le nom de Jarden Consumer Solutions. Tous droits réservés.
Distribué par Holmes Products (Europe) Ltd., 1 Francis Grove, London SW19 4DT, United Kingdom.
Imprimé en RPC
P.N. 141409
INSTRUCTION MANUAL
NOTICE D’UTILISATION
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUAL DE INSTRUÇÕES
MANUALE D'USO
INSTRUCTIEHANDLEIDING
BRUKERHÅNDBOK
KÄYTTÖOPAS
BRUKSANVISNING
BRUGERVEJLEDNING
INSTRUKCJA
ECVEIQIDIO ODGCIXM VQGRGR
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
HASZNÁLATI UTASÍTÁS
NÁVOD K OBSLUZE
MODEL# BASF1516
pure indoor living
SPR-100710
2-in-1 DUAL DESK/STAND
FAN
PLEASE READ AND SAVE THESE
INSTRUCTIONS
GENERAL DESCRIPTION (SEE FIG. 1)
A Front Grill
B. Fan Blade
C. Securing Screw
D. Grill Mounting Nut
E. Rear Grill
F. Motor Shaft
G. Plastic Sleeve
H. Motor Housing
I. Selector (Speed) Control
J. Oscillation Control
K. Tilt Head Adjustment Knob
L. Fan Head Locking Knob
M. Fan Head's Neck
N. Inner Pole Extension
O. Pole Locking Knob
P. Outer Pole
Q. Additional Short Pole
R. Base Cover
S. Weight
T. Washer
U. T-Shaped Locking Lever
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic safety
precautions should always be taken including the
following:
• Use the fan only for purposes described in the
instruction manual.
• To protect against electrical shock, do not
immerse the fan, plug or cord in water or spray
with liquids.
• Close supervision is necessary when any
appliance is used by or near children.
• Unplug from the electrical outlet when not in
use, when moving the fan from one location to
another, before putting on or taking off parts
and before cleaning.
• Avoid contact with any moving parts.
• Do not operate in the presence of explosive
and/or flammable fumes.
• Do not operate fan until fully assembled with all
parts properly in place.
• To avoid fire hazard, NEVER place the cord
under rugs or any parts near an open flame,
cooking or other heating appliance.
• Ensure that the fan is switched off from the
supply mains before removing the guard.
• Do not operate any appliance with a damaged
cord, plug, after the appliance malfunctions, or
has been dropped/damaged in any manner.
• The use of attachments not recommended or
sold by the appliance manufacturer may cause
hazards.
• Do not use outdoors.
• Do not let the cord hang over the edge of a
table or counter, or come into contact with hot
surfaces.
• To disconnect from the electrical supply, grip
the plug and pull from the wall outlet. DO NOT
pull on the cord.
• Always use on a dry, level surface.
• Do not operate without the fan grills properly in
place.
• This product is intended for household use
ONLY and not for commercial or industrial
applications.
• Should the fan stop working, first check the
fuse in the plug (UK only) or fuse/circuit
breaker at the distribution board is operating,
before contacting the manufacturer or service
agent.
• If the supply cord or plug is damaged, it must
be replaced by the manufacturer or its service
agent or a similarly qualified person in order to
avoid hazard.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety. Children should be
supervised to ensure that they do not play with
the appliance.
MISSING A PART FOR YOUR FAN?
Please call 0800 052 3615 for assistance.
ASSEMBLY INSTRUCTIONS
Base/Pole assembly
You will need the base cover (R), weight (S),
outer pole (P), washer (T) and T-shaped locking
lever (U).
1. Turn the base cover upside down and place the
weight into the base cover.
2. Insert the threaded end of the T-shaped locking
lever into the hole of the washer, weight and
through the base cover.
3. Whilst holding the base cover and weight with
one hand vertically, connect the outer pole to
the base, sliding the T-shaped locking lever into
the bottom of the outer pole with your other
hand.
4. Turn the T-shaped locking lever clockwise to
securely attach the pole to the base.
5. Set the base on the floor, weight side down.
Fan head assembly
You are now ready to assemble the fan head.
ENGLISH 1. Unscrew grill mounting nut (D), turning counter-
clockwise, before positioning the rear grill (E)
over the motor shaft (F), making certain that the
vertical slots at the top and bottom of the rear
grill fit over the prongs on the motor housing
(H). Make sure that the carry handle is topmost
on the motor assembly.
2. Secure the rear grill (E) in its place using the
rear grill mounting nut (D). Turn this nut
clockwise and tighten firmly.
3. Slide the fan blade (B) onto the motor shaft
(F) through the rear protrusion, removing and
discarding plastic sleeve (G) if included.
Loosen securing screw (C) on side of
protrusion first. Then make sure securing
screw aligns with notch on motor shaft and
tighten. Avoid contact with sharpCAUTION:
end of blades.
4. Centre the front grill (A) by aligning the
Bionaire logo on the logo plate so that it is
horizontal and parallel with the floor. Then
place the bracket at the top over the front and
rear grills with the hole on the bracket going
through the center vertical bar. Affix the other
clips, making sure they go over both the front
and rear grills.
Final assembly
1. Slide the inner pole extension (N) up from the
outer pole (P), first loosening the pole locking
knob (O), to securely hold this position.
Tighten the pole locking knob (O).
2. Place the fan head assembly into this
extension pole, inserting the fan’s head neck
(M) into the pole opening.
3. Add the fan head locking knob (L) to the hole
in the fan head's neck (M), making sure holes
are aligned, and tighten.
NOTE: Fan head locking knob (L) may be in
additional short pole when shipped.
Converting to a table fan
An additional short pole (Q) is supplied which
allows the fan to be converted into a table fan.
To change to this short pole, remove the fan
head assembly from its position on top of the
inner pole extension (N) and unscrew the T-
shaped locking lever (U) at the base. Remove
the outer pole (P), replace with the short pole
(Q) and reassemble as detailed above.
OPERATING INSTRUCTIONS
1. Set the fan base on a dry level surface
2. Make sure the Selector (Speed) Control (H) is
in the OFF(0) position. Selector (Speed)
Control (H) is located on the top of the fan
motor housing.
3. Plug the cord into a suitable 220-240V. AC
outlet.
4. The SPEED is adjusted by turning the Selector
(Speed) Control (H) to the desired setting:
0-1-2-3.
5. The OSCILLATION control (I) is located
on the top of the fan motor housing. To start
oscillation, push the control knob down.
To stop oscillation, pull the control knob up.
ADJUSTMENT
Tilt adjustment
To adjust tilt, loosen the tilt head adjustment
knob (K) and tighten to desired angle.
Height adjustment
Follow these instructions to adjust the height of
the fan.
1. Turn the pole locking knob (O) counter-
clockwise to loosen the pole.
2. Adjust the pole to the desired height and firmly
tighten the locking knob in a clockwise
direction.
CLEANING AND MAINTENANCE
Follow these instructions to correctly and safely
care for your BionaireTM fan. Please remember:
• Always unplug the fan before cleaning or
assembly.
• Do not allow water to drip on or into the fan
motor housing.
• Be sure to use a soft cloth, moistened with a
mild soap solution.
• Do not use any of the following as a cleaner:
petrol, thinners or benzene.
Fan blade cleaning
(See instructions for fan head assembly)
1. To access the fan blade, remove the front grill
and securing screw.
2. Clean the fan blade, front and rear grills with
a soft moist cloth.
3. Replace the fan blade, tighten screw and
securely fasten the front grill.
Fan head, base and pole cleaning
Using a soft, moist cloth, with or without a mild
soap solution, carefully clean the fan base, pole
and head. Please use caution around the motor
housing area. Do not allow the motor or other
electrical components to be exposed to water.
FAN STORAGE
Your fan can be stored either partially
disassembled or assembled.
It is important to keep it in a safe, dry location.
• If stored disassembled, we recommend using
the original (or appropriately sized) box.
• If stored assembled or partially assembled,
remember to protect the fan head from dust.
GUARANTEE
Please keep your receipt as this will be required
for any claims under this guarantee.
This appliance is guaranteed for 3 years after
your purchase as described in this document.
During this guaranteed period, if in the unlikely
2 3
Fig.1
MODEL# BASF1516
A B C D E F H I J
K
M
N
O
P
L
R
S
TU
G
Q

Specyfikacje produktu

Marka: Bionaire
Kategoria: Wentylator
Model: BASF1516

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bionaire BASF1516, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wentylator Bionaire

Bionaire

Bionaire BW2300 Instrukcja

8 Października 2024
Bionaire

Bionaire BT46R Instrukcja

8 Października 2024
Bionaire

Bionaire BT90R Instrukcja

8 Października 2024
Bionaire

Bionaire BAOF30G Instrukcja

8 Października 2024
Bionaire

Bionaire BAC14-I Instrukcja

8 Października 2024
Bionaire

Bionaire BASF1016G Instrukcja

8 Października 2024
Bionaire

Bionaire BMT50-I Instrukcja

8 Października 2024
Bionaire

Bionaire BT 14 Instrukcja

8 Października 2024
Bionaire

Bionaire BAC19 Instrukcja

23 Września 2024
Bionaire

Bionaire BBLF01 Instrukcja

20 Września 2024

Instrukcje Wentylator

Najnowsze instrukcje dla Wentylator

Ausclimate

Ausclimate EcoSmart ACAC300CB Instrukcja

14 Stycznia 2025
Breville

Breville the PopFan LFA100 Instrukcja

14 Stycznia 2025
Breville

Breville the AirDynamic 3D Connect LPF308 Instrukcja

14 Stycznia 2025
Ausclimate

Ausclimate EcoSmart ACAC230CB Instrukcja

14 Stycznia 2025
Emerio

Emerio FN-108784.1 Instrukcja

13 Stycznia 2025
Emerio

Emerio FN-114204.1 Instrukcja

13 Stycznia 2025
Emerio

Emerio FN-110475 Instrukcja

13 Stycznia 2025
Emerio

Emerio FN-110139.3 Instrukcja

13 Stycznia 2025
Emerio

Emerio FN-110477.2 Instrukcja

13 Stycznia 2025
Emerio

Emerio FN-114223.3 Instrukcja

13 Stycznia 2025