Instrukcja obsługi Bestway 58386

Bestway Niesklasyfikowane 58386

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bestway 58386 (33 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/33

S-S-000541

B版: 英/德/芬/荷/希/俄/瑞

Filter Pump

Model: #58117

220-240V~, 50Hz, 45W

Model: #58118

220-240V~, 50Hz, 85W

3,028 L/h (800 Gal./h)

Hmax 1.0m Hmin 0.19m IPX5

OWNER’S MANUAL

www.bestway-service.com

S-S-000541

READ AND FOLLOW ALL INSTRUCTIONS

WARNING

–

TO REDUCE THE RISK OF INJURY,do not permit children to use this product unless they are closely supervised at all times.

WARNING

–

RISK OF ELECTRIC SHOCK

–

The pump must be supplied by an isolating transformer or supplied through a residual current device(RCD)

having a rated residual operating current not exceeding 30mA.

WARNING

–

RISK OF ELECTRIC SHOCK

–

The pump must be supplied by an isolating transformer or supplied through a circuit of alternative residual

power (DDR) 30mA maximum. (For France Only)

WARNING

–

RISK OF ELECTRIC SHOCK

–

The pump cannot be using while people are inside the pool.

DO NOT BURY CORD.Locate cord to minimize abuse from lawn mowers,hedge trimmers,and other equipment.

WARNING

–

To reduce the risk of electric shock,IF FILTER PUMP POWER CORD BECOMES DAMAGED IN ANY WAY, THE PUMP MUST BE

DISCARDED.

WARNING

–

To reduce the risk of electric shock,do not use extension cord to connect unit to electric supply;provide a properly located outlet.

CAUTION

–

This pump is for use with storable pools only.Do not use with permanently-installed pools.A storable pool is constructed so that it is capable of

being readily disassembled for storage and reassembled to its original integrity.A permanently-installed pool is constructed in or on the ground or in a

building such that it cannot be readily disassembled for storage.

IMPORTANT

–

Using the pump with an unmatched electrical supply is dangerous and will result in catastrophic failure of pump.

RISK OF ELECTRICAL SHOCK

–

When working with electricity, turn the electrical power off at the circuit breaker and lock breaker door. Failure to do so

will result in increased risk of shock, injury and possibly death.

DO NOT REMOVE THE GROUNDING PRONG OR MODIFY THE PLUG IN ANY WAY. DO NOT USE ADAPTOR PLUGS. Consult a qualified electrician

for any questions related to the validity of your plugs grounding.

Handle the pump with care. Do not pull or carry the pump by the power cord. Never pull a plug from the outlet by yanking the power cord. Keep cord

free from abrasions. Sharp objects, oil, moving parts, and heat should never be exposed to the filter pump.

WARNING

– This appliance is not intended for use by persons (including children) with reduced physical, sensor or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children

should be supervised to ensure that they do not play with the appliance.

NOTE:

Please examine equipment before use. Notify Bestway at the customer service address listed on this manual for any manufacturing defect or missing parts

at the time of purchase. Verify that the equipment components represent the filter pump model that you had intended to purchase.

NOTE:

Place pump on a solid and level ground. Pay attention to position of pool and pump so adequate ventilation, drainage, and access for cleaning is available.

Never place pump in an area that may accumulate water, or in an area where foot traffic will flow around the pool.

Please ensure the filter pump is at least 2 meters away from the pool side. (For France only)

It is necessary to have the plug accessible after installation of the pool.

The plug of pump shall be at least 3,50 m away from the pool. (For France only)

Electric installations should fulfill the requirements of standards NFC 15-100. (For France only)

NOTE:

Atmospheric conditions may affect the performance and life span of your filter pump. Unnecessary wear and tear may occur during periods of cold, heat

and exposure to sun. Whenever possible shelter pump from these conditions.

It is important to ensure the factory equipped stopper plugs for the inlet and outlet ports replace the screens before removal or maintenance on the pump is

attempted.

NOTE:

Do not run the pump more than 15 hours per day.

NOTE:

Do not add chemicals in the filter pump.

SAVE THESE INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Pump Installation Directions

Pedestal Fixing

EN60335-2-41 TEST standard requires the filter pump must be vertically fixed on ground or a certain pedestal made of wood or concrete before

use. There should be two holes 9mm in diameter on the pedestal, the space between which should be 162mm. Put filter pump on the pedestal and

fix them together by fasten the bolts and nuts. All the pedestal parts should weigh over 18kgs at least to prevent the pump from accidental falling.

PART I

Internal Filter Pump Inspection

1) Remove the Filter Cap by unscrewing the Filter Cap Retainer.

2) Inspect the Filter Cartridge ensuring it is centered in the Filter Pump.

3) After inspection, check that the Filter Cap Seal is in place, replace the Filter Cap and screw the Filter Cap Retainer into position.

PART II

Attach the Hoses to the Filter Pump and the Pool

1) Place the loose Hose Clamps on both the ends of the Hoses.

2) Attach the Hoses to the corresponding letters on both the pool and the Filter Pump (A to A, B to B).

3) Tighten the Hose Clamps to the Filter Pump by screwing the fly nut clockwise .

4) Remove the Stopper Plugs from the pool’s Inlet and Outlet Valves and insert the Debris Screens.

5) With the Hoses and the Debris Screens in position, tighten the Hose Clamps.

NOTE: It is important to ensure all elements: Hoses, Debris Screens and Inlet/Outlet Valves are properly aligned.

NOTE: After pump is attached to pool, refer to pool manual for filling instructions.

Bestway®

S-S-000541

Specyfikacje produktu

Marka:	Bestway
Kategoria:	Niesklasyfikowane
Model:	58386

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bestway 58386, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Bestway

Bestway 43644 Instrukcja

12 Stycznia 2025

Bestway 58775 Instrukcja

25 Grudnia 2024

Bestway 58767 Instrukcja

5 Października 2024

Bestway 52646 Instrukcja

4 Października 2024

Bestway 58764 Instrukcja

4 Października 2024

Bestway SaluSpa 60024 Instrukcja

4 Października 2024

Bestway 21096 Instrukcja

3 Października 2024

Bestway Hydro-Force 65303 Instrukcja

24 Września 2024

Bestway 25044 Instrukcja

23 Września 2024

Bestway SaluSpa 60032 Instrukcja

22 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Rock N Roller R14G Instrukcja

29 Stycznia 2025

Rock N Roller R6RT Instrukcja

29 Stycznia 2025

QSC TSC-8 Instrukcja

29 Stycznia 2025

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025

Sunding SD-581G Instrukcja

29 Stycznia 2025

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025

Shimbol Memory I PRO Instrukcja

29 Stycznia 2025

OSEE TX402 Instrukcja

29 Stycznia 2025

GOgroove Record Cleaning Kit Instrukcja

29 Stycznia 2025