Instrukcja obsługi BenQ XL2720T
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BenQ XL2720T (70 stron) w kategorii monitor. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 10 użytkowników na średnio 3.5 gwiazdek
Strona 1/70
XL Series
User Manual
2
Copyright
Copyright © 2016 by BenQ Corporation. All rights reserved. No part of this publication may
be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any
language or computer language, in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, manual or otherwise, without the prior written permission of BenQ
Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or
fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this
publication and to make changes from time to time in the contents hereof without obligation of
BenQ Corporation to notify any person of such revision or changes.
The performance of flicker-free may be affected by external factors such as poor cable quality,
unstable power supply, signal interference, or poor grounding, and not limited to the above
mentioned external factors. (Applicable for flicker-free models only.)
Power Safety
• The AC plug isolates this equipment from the AC supply.
• The power supply cord serves as a power disconnect device for pluggable equipment. The
socket outlet should be installed near the equipment and be easily accessible.
• This product should be operated from the type of power indicated on the marked label. If you
are not sure of the type of power available, consult your dealer or local power company.
• An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0.75mm2 must
be used.
Care And Cleaning
• Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD
monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass
cleaners.
• Slots and openings on the back or top of the cabinet are for ventilation. They must not be
blocked or covered. Your monitor should never be placed near or over a radiator or heat
source, or in a built-in installation unless proper ventilation is provided.
• Never push objects or spill liquid of any kind into this product.
Please follow these safety instructions for best performance, and long life for your monitor.
3
Servicing
Do not attempt to service this product yourself, as opening or removing covers may expose
you to dangerous voltages or other risks. If any of the above mentioned misuse or other
accident such as dropping or mishandling occurs, contact qualified service personnel for
servicing.
BenQ ecoFACTS
BenQ has been dedicated to the design and development of greener product as part of its
aspiration to realize the ideal of the "Bringing Enjoyment 'N Quality to Life" corporate vision
with the ultimate goal to achieve a low-carbon society. Besides meeting international regulatory
requirement and standards pertaining to environmental management, BenQ has spared no
efforts in pushing our initiatives further to incorporate life cycle design in the aspects of
material selection, manufacturing, packaging, transportation, using and disposal of the products.
BenQ ecoFACTS label lists key eco-friendly design highlights of each product, hoping to ensure
that consumers make informed green choices at purchase. Check out BenQ's CSR Website at
http://csr.BenQ.com/ for more details on BenQ's environmental commitments and
achievements.
4
Table of Contents
Copyright ......................................................................................................................................2
Disclaimer .....................................................................................................................................2
Power Safety .................................................................................................................................2
Getting started .............................................................................................................................6
Getting to know your monitor ................................................................................................8
Front view.................................................................................................................................................... 8
Back view ..................................................................................................................................................... 8
How to assemble your monitor hardware ........................................................................ 11
How to detach the stand and the base ....................................................................... ..... 18...................
Adjusting the monitor height ................................................................................................................ 21
Rotating the monitor .............................................................................................................................. 22
Viewing angle adjustment ..................................................................... .................................. ................ 23
Using the monitor wall mounting kit ................................................................................................... 24
Getting the most from your BenQ monitor ...................................................................... 25
How to install the monitor on a new computer ................................................. ........... 26..................
How to upgrade the monitor on
an existing computer .........
........................................................ 27
How to install on Windows 10 system (selected models only) ................................................... 28
How to install on Windows 8 (8.1) system (selected models only) ............................................ 29
How to install on Windows 7 system ................................................................................................ 30
How to watch 3D content on your monitor ........................ ............... 31.............................................
How to adjust your monitor ................................................................................................. 33
The control panel..................................................................................................................................... 33
The S Switch ................................................................ ........................... 34...................................................
Basic menu operation.............................................................................................................................. 35
Initial setup for playing games ............................................................ ................................... ................ 37
Picture optimization ........................................................................ .................................. ...................... 39
Customizing the hot keys..................................................................... .................................. ................ 39
Setting up your own game mode ................................................................ .................................. ....... 39
Downloading more game modes using Game Mode Loader ........................................................ 40
Adjusting display mode ........................................................................................................................... 40
Using Smart Scaling ........................................................ ....................... 41...................................................
Using Instant Mode......................................................... .................................................... ..................... 41
Switching between Classic and G-SYNC modes (for models with G-SYNC module only) .. 41
Navigating the main menu ...................................................................................................... 43
OSD menus for models with G-SYNC module................................................................................ 43
Display menu ............................................. ........... 44.....................................................................................
Engine Switch menu ....................................................... ..................................................... ..................... 46
Picture menu ............................................. ........... 47.....................................................................................
Picture Advanced menu ...................................................................... ................................... ................ 50
Save Settings menu .......................................................................... ...................................... 54..................
Audio menu ..................................................................................................... ...... 55....................................
System menu ............................................. ................ ........... 56...................................................... ...............
G-SYNC mode: Engine Switch menu ..................................................................................................60
G-SYNC mode: Picture menu .................................................................. ................................... ..........61
G-SYNC mode: Picture Advanced menu ............................................................................. 3..............6
G-SYNC mode: System menu ...............................................................................................................65
Troubleshooting ........................................................................................................................68
Frequently asked questions (FAQ)....................................................................................................... 68
Need more help?...................................................................................................................................... 70
6 Getting started
Getting started
When unpacking please check you have the following items. If any are missing or damaged,
please contact the place of purchase for a replacement.
BenQ LCD Monitor
Monitor Stand
Monitor Base
S Switch (Swift Switch)
Quick Start Guide
CD-ROM
Power Cord
(Picture may differ from product supplied
for your region.)
7 Getting started
USB Cable
Video Cable: D-Sub
(Optional accessory for models with
D-Sub inputs, sold separately)
Video Cable: DVI-D Dual Link
Video Cable: HDMI
(Optional accessory, sold separately)
Video Cable: DP
(XL2420G / XL2420GE only)
NVIDIA 3D Vision Kit
(XL2420TX only)
Protective cover
Headphone hook
(Pre-installed, can be removed)
• Available accessories and the pictures shown here may differ from the actual contents and the product
supplied for your region. For cables that are not supplied with your product, you can purchase them
separately.
• Consider keeping the box and packaging in storage for use in the future when you may need to transport the
monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Always keep the product and accessories out of reach of small children.
8 Getting to know your monitor
Getting to know your monitor
Front view
Back view
1. Infrared (IR) sensor (XL2420TX
only)
2. Control buttons
3. Power button
4. Infrared (IR) emitter indicator
2
3
1
4
1. AC Power Input jack
2. Cable management hole
3. Kensington lock slot
4. Headphone hook
5. Handle
1 2
5
4
3
9 Getting to know your monitor
Back view (for models with G-SYNC module)
6. S Switch socket
7. DisplayPort socket
8. D-Sub socket
9. DVI-D socket
10. HDMI socket x 2
11. USB port (upstream; connecting
to the PC)
12. USB port (downstream;
connecting to USB devices)
13. Headphone jack
14. USB port x 2 (downstream;
connecting to USB devices)
15. VESA mount release button
6 7 8
9
10
11
14
13
12
15
1. AC Power Input jack
2. Cable management hole
3. Service port (Service only. Do
not remove the seal or the
warranty is void.)
4. Kensington lock slot
5. Headphone hook
6. Handle
1 2
6
5
43
10 Getting to know your monitor
7. S Switch socket
8. DVI-D socket
9. HDMI socket x 2
10. DisplayPort socket
11. USB port (upstream; connecting
to the PC)
12. Headphone jack
13. USB port x 2 (downstream;
connecting to USB devices)
14. VESA mount release button
7 8
9
10
13
12
11
14
11 How to assemble your monitor hardware
How to assemble your monitor hardware
• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. Available input and output jacks may vary depending on
the purchased model.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item
like the monitor packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean padded surface.
(For XL2420)
Orient and align the stand base socket with the end
of the stand arm. Make sure that the locking tabs at
the end of the stand bypass the retaining plates on
the stand, then push the stand and the base
together. If the base is properly attached, the arrow
at the end of the stand should point to RISER
UNLOCK.
XL2420
Locking tab
Retaining plate
12 How to assemble your monitor hardware
(For XL2420)
Turn the stand counterclockwise to align the arrow
at the end of the stand with the one on the
monitor base ( ). Raise the thumbscrew lid ( )
and tighten the thumbscrew as illustrated ( ).
Then push the lid back.
Gently attempt to pull them back apart to check
that they have properly engaged.
XL2420
(For XL2720)
Lift up one end of the stand slightly to ensure a
successful installation ( ). Attach the monitor
stand to the monitor base as illustrated ( ). Make
sure to align the arrow on the end of the stand to
the one on the monitor base.
XL2720
Turn the stand clockwise until you cannot go
further.
XL2720
1
3
2
1
2
13 How to assemble your monitor hardware
Raise the thumbscrew lid ( ) and tighten the
thumbscrew as illustrated ( ). Then push the lid
back.
XL2720
Orient and align the stand arm with the monitor
( ), push them together until they click and lock
into place ( ).
Gently attempt to pull them back apart to check
that they have properly engaged.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
To move the monitor, you must hold the handle and the
bottom of the stand base at the same time as illustrated. You
can protect the monitor using the supplied protective cover.
You might want to adjust the monitor stand height.
See Adjusting the monitor height on page 21 for
more information.
2
1
1
2
14 How to assemble your monitor hardware
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
2. Connect the power cable to the monitor.
Plug one end of the power cord into the socket
labelled on the rear of the monitor. Do not
connect the other end to a power outlet just yet.
3. Connect to the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your region.
4. Connect the PC video cable
Available input and output jacks may vary depending on the purchased model. For models with
G-SYNC module, refer to Modes and the required input source on page 41 for the available
input source and the related menus.
Do not use both DVI-D cable and D-Sub cable on the same PC. The only case in which both cables can be used is
if they are connected to two different PCs with appropriate video systems.
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end
without the ferrite filter) to the monitor video
socket. Connect the other end of the cable (at the
end with the ferrite filter) to the computer video
socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
-5
-5
-5
-5
-5
-5
O
O
O
O
O
O
~ +20
~ +20
~ +20
~ +20
~ +20
~ +20
O
O
O
O
O
-5
O
~ +20
O
Either
15 How to assemble your monitor hardware
To Connect the DVI-D Dual Link Cable
Connect the plug of the DVI-D Dual Link cable to
the monitor video socket. Connect the other end of
the cable (at the end with the ferrite filter) to the
computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
To Connect the HDMI Cable
Connect the plug of the HDMI cable to the HDMI
port on the monitor. Connect the other end of the
cable to the HDMI port of a digital output device.
To Connect the DP Cable
Connect the plug of the DP cable to the monitor
video socket. Connect the other end of the cable to
the computer video socket.
If there is more than one video transmission method available
to you, you might want to take the picture quality of each
video cable into consideration before making the connection.
- Better quality: HDMI / DVI-D / DP
- Good quality: D-Sub
The video cables included in your package and the socket
illustrations on the right may vary depending on the product
supplied for your region.
5. Connect the headphones.
You may connect headphones to the headphone
jack found on the left side of the monitor.
Or
Or
Or
16 How to assemble your monitor hardware
6. Connect USB devices.
Connect the USB cable between the PC and the
monitor (via the upstream USB port at the back).
This upstream USB port transmits data between
the PC and the USB devices connected to the
monitor.
Connect USB devices via other USB ports
(downstream) on the monitor. These downstream
USB ports transmit data between connected USB
devices and the upstream port.
See picture on the right.
7. Connect the S Switch to the monitor.
Connect the S Switch to the S Switch socket found
on the back of the monitor. And place the S Switch
next to your monitor base.
You can place the S Switch either on the left or on the right
of the monitor base.
8. Organize the cables.
TV OUT
PDIF-OUT
SDIF-O UT
17 How to assemble your monitor hardware
9. Turn on the power.
Turn on the monitor by pressing the power button
on the monitor.
Turn on the computer too, and follow the
instructions in Getting the most from your BenQ
monitor on page 25 to install the monitor
software.
To extend the service life of the product, we recommend
that you use your computer's power management function.
When the monitor is powered on, to prevent overheating,
do not cover the monitor with the supplied protective cover
or obstruct the ventilation holes.
19 How to assemble your monitor hardware
Turn the stand clockwise so that the arrow on the
bottom of the stand points to RISER UNLOCK
( ). And then detach the base from the stand
( ).
(For XL2720)
Raise the thumbscrew lid ( ) and release the
thumbscrew as illustrated ( ).
XL2720
Turn the stand counterclockwise until you cannot
go further.
XL2720
2
1
2
1
20 How to assemble your monitor hardware
And then detach the base from the stand. XL2720
You can remove the headphone hook as illustrated. Keep the
headphone hook somewhere safe.
21 How to assemble your monitor hardware
Adjusting the monitor height
To adjust the monitor height, hold both the left and the
right sides of the monitor to lower the monitor or lift
it up to the desired height.
• Avoid placing hands on the upper or lower part of the
height-adjustable stand or at the bottom of the monitor, as
ascending or descending monitor might cause personal injuries.
Keep children out of reach of the monitor while performing this
operation.
• If the monitor has been rotated to portrait mode and height adjustment is desired, you
should be noted that the wide screen will keep the monitor from being lowered to its
minimum height.
22 How to assemble your monitor hardware
Rotating the monitor
1. Pivot the display.
Before rotating the monitor with a portrait viewing orientation, the display has to be rotated 90
degrees.
Right-click the desktop and select Screen resolution from the popup menu. Select Portrait in
Orientation, and apply the setting.
Depending on the operating system on your PC, different procedures should be followed to adjust the screen
orientation. Refer to the help document of your operating system for details.
2. Fully extend the monitor and tilt it.
Gently lift the display up and extend it to the maximum
extended position. Then tilt the monitor.
The monitor should be vertically extended to allow to rotate
from landscape to portrait mode.
3. Rotate the monitor 90 degrees clockwise as
illustrated.
To avoid the edge of the LCD display hitting the monitor base
surface while it is being rotated, do tilt and extend the monitor
to the highest position before you start to rotate the display. You
should also make sure there are no obstacles around the monitor
and there is enough room for cables.
90
23 How to assemble your monitor hardware
Viewing angle adjustment
You may position the screen to the desired angle with -5° to + 20° monitor tilt, 70° (left and
right total) monitor swivel, and 130 mm monitor height.
(For XL2720) You may position the screen to the desired angle with -5° to + 20° monitor tilt,
90° (left and right total) monitor swivel, and 140 mm monitor height.
4. Adjust the monitor to the desired viewing
angle.
-5
-5
-5
-5
-5
-5
O
O
O
O
O
O
~ +20
~ +20
~ +20
~ +20
~ +20
~ +20
O
O
O
O
O
-5
O
~ +20
O
-35
-35
-35
-35
-35
-35
O
O
O
O
O
O
~ +35
~ +35
~ +35
~ +35
~ +35
~ +35
O
O
O
O
O
-35
O
~ +35
O
130 mm
-5
-5
-5
-5
-5
-5
O
O
O
O
O
O
~ +20
~ +20
~ +20
~ +20
~ +20
~ +20
O
O
O
O
O
-5
O
~ +20
O
-45
-45
-45
-45
-45
-45
O
O
O
O
O
O
~ +45
~ +45
~ +45
~ +45
~ +45
~ +45
O
O
O
O
O
-45
O
~ +45
O
140 mm
XL2720
24 How to assemble your monitor hardware
Using the monitor wall mounting kit
The back of your LCD monitor has a VESA standard mount with 100mm pattern, allowing the
installation of a wall mount bracket. Before starting to install a monitor wall mounting kit,
please read the precautions carefully.
Precautions
• Install your monitor and monitor mounting kit on a wall with flat surface.
• Ensure that the wall material and the standard wall mount bracket (purchased separately) are
stable enough to support the weight of the monitor. Refer to the product specifications for
weight information.
• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.
The maximum dimensions of the VESA mounting bracket compatible with your monitor are 125mm x 125mm.
1. Remove the monitor stand.
Detach the monitor stand as instructed in step 1~2
in How to detach the stand and the base on page
18.
2. Remove the screws on the back cover.
Use a cross-pointed screwdriver to release the
screws on the back cover. The use of a
magnetic-head screwdriver is recommended to
avoid of losing the screws.
In case you intend to use your monitor on the stand in the
future, please keep the monitor base, monitor stand, and
screws somewhere safe for future use.
3. Follow the instruction manuals of the wall
mount bracket you purchased to complete
the installation.
Use four M4 x 10 mm screws to fix a VESA standard wall
mount bracket to the monitor. Make sure that all screws are
tightened and secured properly. Consult a professional
technician or BenQ service for wall mount installation and
safety precautions.
25 Getting the most from your BenQ monitor
Getting the most from your BenQ monitor
To gain the most benefit from your new BenQ color LCD flat screen monitor, you should
install the custom BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor
CD-ROM.
The circumstances under which you connect and install your BenQ LCD Monitor will
determine which process you need to follow to successfully install the BenQ LCD Monitor
driver software. These circumstances relate to which version of Microsoft Windows you are
using, and whether you are connecting the monitor and installing the software onto a new
computer (without existing monitor driver software), or whether you are upgrading an existing
installation (which already has existing monitor driver software) with a newer monitor.
In either case however, the very
next time you turn on your
computer (after connecting the
monitor to your computer), Windows will automatically recognize the new (or different)
hardware, and will launch its Found New Hardware wizard.
Follow the wizard instructions until it asks you to
select a monitor model.
At that point, click
the
Have Disk
button, insert the BenQ LCD Monito
r CD-ROM and select the appropriate
monitor model. Further details and step-by-step instructions for either an automatic (new) or
upgrade (existing) installation, see:
• How to install the monitor on a new computer on page 26.
• How to upgrade the monitor on an existing computer on page 27.
• If you require a User Name and Password to login to your Windows computer, you must be logged on as an
Administrator or as a member of the Administrators group in order to install the monitor driver software.
Furthermore, if your computer is connected to a network which has security access requirements, network
policy settings may prevent you from installing software on your computer.
• To check the name of the purchased model, refer to the specification label on the back of the monitor.
26 Getting the most from your BenQ monitor
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver
software on a new computer which has never had a monitor driver installed before. This
instruction is only suitable for a computer which has never been used before, and for which the
BenQ LCD Monitor is the first ever monitor to be connected to it.
1. Follow the instructions in How to assemble your monitor hardware on page 11.
When Windows starts, it will automatically detect the new monitor and launch the Found
New Hardware Wizard. Follow the prompts until it displays the option to Install Hardware
Device Drivers.
2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
3. Check Search for a suitable driver for my device option, and click Next.
4. Check the option for CD-ROM drives (uncheck all others) and click Next.
5. Look to confirm that the wizard has selected the correct name of your monitor and click
Next.
6. Click Finish.
7. Restart the computer.
If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor
connected to it (and has monitor driver software installed), you should not be following these instructions. You
should instead be following the instructions for How to upgrade the monitor on an existing computer.
To find the suitable driver files for the purchased model, refer to the following table.
Driver files Suitable models
XL2420t XL2420T
XL2420te XL2420TE
XL2420Z XL2420Z / XL2420ZE
XL2420TX XL2420TX
XL2420G XL2420G / XL2420GE
XL2720T XL2720T
XL2720Z XL2720Z / XL2720ZE
27 Getting the most from your BenQ monitor
How to upgrade the monitor on an existing computer
This instruction details the procedure for manually updating the existing monitor driver
software on your Microsoft Windows computer. It is currently tested as compatible for
Windows 10, Windows 8 (8.1), and Windows 7 Operating System (OS).
Installing monitor driver software involves selecting an appropriate information file (.inf) on the
BenQ LCD Monitor CD-ROM for the particular model monitor you have connected, and
letting Windows install the corresponding driver files from the CD. You need only steer it in
the right direction. Windows has an Upgrade Device Driver Wizard to automate the task and
guide you through the file selection and installation process.
See:
• How to install on Windows 10 system (selected models only) on page 28.
• How to install on Windows 8 (8.1) system (selected models only) on page 29.
• How to install on Windows 7 system on page 30.
The BenQ LCD Monitor driver for your model may well function perfectly with other versions of Windows,
however, as at the time of writing, BenQ has done no testing of this driver on other versions of Windows and
cannot guarantee its operation on those systems.
28 Getting the most from your BenQ monitor
How to install on Windows 10 system (selected models only)
1. Open Display Properties.
Go to Start, Settings, Devices, Devices and Printers and right-click the name of your
monitor from the menu.
2. Select Properties from the menu.
3. Click the Hardware tab.
4. Click Generic PnP Monitor, and then the Properties button.
5. Click the Driver tab and the Update Driver button.
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
7. In the Update Driver Software window, select the option Browse my computer for
driver software.
8. Click Browse and navigate to the following directory: d:\BenQ_LCD\Driver\ (where d is
the drive letter designator for the CD-ROM drive).
9. Select the correct folder name of your monitor from provided driver list, and click Next.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Close.
You may be prompted to restart your computer after the driver update is complete.
The drive letter for your CD drive may differ from the example above depending upon your system - it may be
'D:' or 'E:' or 'F:' etc.
29 Getting the most from your BenQ monitor
How to install on Windows 8 (8.1) system (selected models
only)
1. Open Display Properties.
Move the cursor to the lower-right of the screen or press the Windows + C buttons on
the keyboard to bring up the Charm bar. Go to Settings, Control Panel, Devices and
Printers and right-click the name of your monitor from the menu.
Alternatively, right-click the desktop and select Personalize, Display, Devices and Printers,
and right-click the name of your monitor from the menu.
2. Select Properties from the menu.
3. Click the Hardware tab.
4. Click Generic PnP Monitor, and then the Properties button.
5. Click the Driver tab and the Update Driver button.
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
7. In the Update Driver Software window, select the option Browse my computer for
driver software.
8. Click Browse and navigate to the following directory: d:\BenQ_LCD\Driver\ (where d is
the drive letter designator for the CD-ROM drive).
9. Select the correct folder name of your monitor from provided driver list, and click Next.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Close.
You may be prompted to restart your computer after the driver update is complete.
The drive letter for your CD drive may differ from the example above depending upon your system - it may be
'D:' or 'E:' or 'F:' etc.
31 Getting the most from your BenQ monitor
How to watch 3D content on your monitor
Your monitor supports playing three-dimensional (3D) content transferred through DVI-D
Dual Link or DP cable, depending on the purchased model. Yet you need to have the
appropriate hardware equipment and software programs that are compatible with 3D playback.
System requirements
• BenQ LCD Monitor (XL20 series)
• Compatible 3D glasses
• PC with Microsoft Windows 7 or Windows 8 (8.1) Operating System
• Compatible graphics processing units (GPU) with the latest driver files installed
• Compatible software programs that play 3D playback
For the compatible accessories, visit
http://www.nvidia.com/object/3d-vision-requirements.html. For the appropriate 3D players,
check with the 3D content providers.
Playing 3D content
Follow the instruction manuals of your 3D accessories to install the hardware and the
software. If the 3D glasses are properly connected and IR signal is detected, the IR emitter
indicator on the bottom right of the monitor and on the IR emitter module (purchased
separately for XL2420T / XL2420TE / XL2720) will light up.
To improve the performance of 3D glasses, you can do the following:
• On XL2420TX, check if there are any obstacles in front of the IR sensor located at the front
top of the monitor that keep the sensor from receiving signals from the 3D glasses.
Go to System
and Emitter Mode
and change the setting as needed. See Emitter Mode
(XL2420TX only) on page 58 for more information.
• Follow the instruction manuals of the 3D accessories to make adjustment.
If you want to adjust the brightness when watching 3D content, go to Picture
and
NVIDIA® 3D
LightBoost™. See Brightness (during 2D playback) / NVIDIA® 3D LightBoost™ (during 3D
playback) on page 47 for more information.
3D content can be transferred to XL2420TX through HDMI cable (version 1.3 or above) as well.
• Not all menu options are available for 3D playback.
• For models with G-SYNC module, 3D playback is available in G-SYNC mode only.
• Contact NVIDIA or visit NVIDIA website (http://www.nvidia.com/page/home.html) for the purchase and the
settings of the compatible GPU.
• Visit the NVIDIA website (www.nvidia.com/3DUpdate) for the latest GPU driver files.
32 Getting the most from your BenQ monitor
For models with G-SYNC module, adjust the brightness during 3D playback under G-SYNC
mode > Picture > NVIDIA® 3D LightBoost™. See Switching between Classic and G-SYNC
modes (for models with G-SYNC module only) on page 41 for details on mode switch.
Safety information for watching 3D content
• You may experience eye strain after watching 3D content for certain period of time. Take off
the 3D glasses and take a rest to relieve the eye strain.
• If you experience headaches, dizziness, or nausea, stop watching 3D content immediately. You
might need to consult a doctor if the symptoms last.
• Watching 3D content for a long period of time may increase health risks. For small children,
the elderly, the pregnant women or people who have high blood pressure or other health
concerns, consult a doctor before watching 3D content.
IR sensor is embedded in the front bezel of your XL2420TX and is not visible to you.
33 How to adjust your monitor
How to adjust your monitor
The control panel
All OSD (On Screen Display) menus can be accessed by the control keys.
No. Name Description
1. Control keys Accesses the functions or menu items displayed on the screen,
right next to each key.
2. Power key Turns the power on or off.
1
2
The control keys are embedded in a touchpad and are indicated by LED indicators. Touch of an LED indicator
represents pressing the corresponding control key.
34 How to adjust your monitor
The S Switch
Apart from the control keys, S Switch also provides a quick way to control and access the OSD
menus.
• You need to connect the S Switch to your monitor prior to use. Follow the instructions in Connect the
S Switch to the monitor. on page 16.
• For models with G-SYNC module, S Switch works in Classic mode only.
No. Name Function
1. Wheel • For Increase/Decrease adjustment.
• Scrolls Up/Down in a menu.
• Selects menu item by pressing once.
2. Return button Returns to the previous menu.
3. Gamer 1
button
• Press to switch to Gamer 1 (Picture Mode).
• Press and hold for 5 seconds to save the customized display settings
for Gamer 1.
4. Gamer 2
button
• Press to switch to Gamer 2 (Picture Mode).
• Press and hold for 5 seconds to save the customized display settings
for Gamer 2.
5. Gamer 3
button
• Press to switch to Gamer 3 (Picture Mode).
• Press and hold for 5 seconds to save the customized display settings
for Gamer 3.
1
2
3
4
5
S Switch is designed for BenQ LCD Monitor XL20 series exclusively. Do not connect it to other devices with
USB ports.
35 How to adjust your monitor
Basic menu operation
You can use the OSD menu to adjust all the settings on your monitor.
1. Press any of the control keys. Alternatively, press the wheel or the return button on the
S Switch.
2. The hot key menu is displayed. The top three controls are custom keys and are designated
for particular functions.
3. Select Menu to access the main menu.
4. In the main menu, follow the icons next to the control keys to make adjustments or
selection. See Navigating the main menu on page 43 for details on the menu options.
Blur Reduction
Picture Mode
Display Mode
Menu
Exit
Blur Reduction
Picture Mode
Display Mode
Menu
Exit
1 2
34
No. OSD in hot key
menu
OSD icon
in main
menu
Function
Custom Key 1 • By default, the key is the hot key for Blur Reduction
(Motion Blur Reduction) or Engine Switch (for
models with G-SYNC module). To change the default
settings, see Customizing the hot keys on page 39.
• For Up/Increase adjustment.
36 How to adjust your monitor
Controlling the display with Display Pilot (selected models only)
The provided Display Pilot software on the CD is an alternative to control the display. The
main functions include:
• Control of the OSD menus.
• Access to more game modes through Game Mode Loader.
To find out more about the software, go to System
> > Options User Manual
in the Display
Pilot.
Custom Key 2 • By default, the key is the hot key for Picture Mode.
To change the default settings, see Customizing the
hot keys on page 39.
• (When in G-SYNC mode) By default, the key is the
hot key for ULMB. To change the default settings, see
Customizing the hot keys on page 39.
• For Down/Decrease adjustment.
Custom Key 3
/
• By default, the key is the hot key for Display Mode.
To change the default settings, see Customizing the
hot keys on page 39.
• (When in G-SYNC mode) By default, the key is the
hot key for Black eQualizer. To change the default
settings, see Customizing the hot keys on page 39.
• Enters sub menus.
• Selects menu items.
Menu • Activates the main menu.
• Returns to the previous menu.
Exit Exits OSD menu.
No. OSD in hot key
menu
OSD icon
in main
menu
Function
• OSD = On Screen Display.
The hot keys only operate while the main menu is not currently displaying. Hot key displays will disappear after
a few seconds of no key activity.
• To unlock the OSD controls, press and hold any key for 10 seconds.
• Supported operating systems: Windows 7, Windows 8, and Windows 8.1.
• For models with G-SYNC module, Display Pilot works in Classic mode only.
37 How to adjust your monitor
Initial setup for playing games
You can optimize the monitor to enhance your gaming experience. You might want to start
with the following settings.
1. Set the screen refresh rate to 144 Hertz (144 Hz).
a. Right-click the desktop and select Screen resolution. Click Advanced settings. Under
the Monitor tab, change the screen refresh rate to 144 Hertz. And then click Apply and
Yes to confirm the change.
The highest refresh rate supported by XL2420TX/XL2720T is 120 Hz.
38 How to adjust your monitor
b. Go to the setup menu in your game, and change the frame rate or screen refresh rate to
144 Hz. Refer to the Help document that came with your game for details.
To check if the screen refresh rate has been changed, select Menu from the hotkey menu
on your monitor, and go to System and Information. The refresh rate in Current
Resolution should be 144 Hz.
2. Select a desired display mode. See Adjusting display mode on page 40.
3. Resize your display by Smart Scaling. See Using Smart Scaling on page 41.
4. Select an appropriate game mode for your game. FPS is for FPS games, while RTS is for
RTS games. For more game modes, please download by Game Mode Loader. See
Downloading more game modes using Game Mode Loader on page 40.
5. Adjust the brightness of your display. See Brightness (during 2D playback) / NVIDIA® 3D
LightBoost™ (during 3D playback) on page 47.
For models with G-SYNC module, adjust the brightness during 3D playback under
G-SYNC mode > Picture > NVIDIA® 3D LightBoost™. See Switching between Classic
and G-SYNC modes (for models with G-SYNC module only) on page 41 for details on
mode switch.
6. Adjust the brightness of the black shades by Black eQualizer. See Black eQualizer on page
48.
7. Adjust the monitor height. See Adjusting the monitor height on page 21.
Depending on the operating system on your PC, different procedures should be followed to adjust the screen
refresh rate. Refer to the Help document of your operating system for details.
If 144 Hz is not available in your menus, check the following:
• make sure the DVI-D Dual Link cable is properly connected to your computer and the monitor
• make sure your GPU supports 144 Hz
• make sure your game supports 144 Hz.
39 How to adjust your monitor
Picture optimization
The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the Auto
Adjustment
function. Go to Display
and Auto Adjustment
to optimize the currently
displayed image to the screen.
If you wish, you can always adjust the screen geometric settings manually using geometry menu
items. To assist you in this endeavour, BenQ has provided a screen test image utility which you
can use to check for screen color, grayscale and line gradient display.
1. Run the test program auto.exe from CD-ROM. You could also use any other image, such as
the desktop of your operating system. However, we recommend that you use auto.exe. As
you run auto.exe, a test pattern displays.
2. Press any of the control keys, or the wheel, or the return button on the S Switch to bring
up the hot key menu. Select Menu to enter the main menu.
3. Go to Display and Auto Adjustment.
4. If you notice a vertical noise (like a curtain effect-shimmering
of vertical lines), select
Pixel
Clock and adjust the monitor until the noise disappears.
5. If you notice a horizontal noise, select Phase and adjust the monitor until the noise
disappears.
Customizing the hot keys
The top 3 control keys (also called custom keys) perform as hot keys to provide direct access
to pre-defined functions. You can change the default setting and designate different functions
for these keys.
1. Press any of the control keys, or the wheel, or the return button on the S Switch to bring
up the hot key menu.
2. Select Menu to access the main menu.
3. Go to System.
4. Select the custom key you want to change.
5. In the sub menu, select a function that can be accessed by this key. A pop-up message will
appear, showing that the setup is complete.
Setting up your own game mode
There are several preset picture modes on your monitor that are suitable for games. To better
suit your needs, you can change and save the related display settings, and switch to your own
game mode easily.
The default Picture Mode
might be set for a specific type of game.
If you prefer other picture modes, go to
Picture Advanced and change setting in Picture Mode.
When you connect a digital video output using a digital (DVI, HDMI, or DP) cable to your monitor, the Auto
Adjustment function will be disabled, because the monitor will automatically display the best image.
Please ensure that the connected graphic card on your computer is set to the native resolution of the monitor
when you use the Auto Adjustment function.
For models with G-SYNC module, you can also set the hot keys in G-SYNC
mode >
System. See Switching
between modes on page 41
and G-SYNC mode: System menu on page 65
for more information.
40 How to adjust your monitor
1. Adjust the related available settings in different OSD menus.
2. After all settings are done, go to Save Settings and save as one of the game modes.
Alternatively, press and hold one of the game mode buttons (labeled 1~3) on S Switch to
save as one of the game modes.
3. If you want to switch to your game mode at any time, go to Picture Advanced and
Picture Mode, and select the game mode you saved in Step 2. Your preferred display
settings will be applied all at once.
Alternatively, press one of the game mode buttons (depending on your settings in Step 2)
on S Switch to switch to the desired game mode quickly.
Downloading more game modes using Game Mode Loader
Instead of customizing your own display settings, you can download the game modes available
on the BenQ website and apply the settings directly.
(For XL2420T / XL2720T series)
1. Link to gaming.benq.com.
2. Download and install the game mode loader.
3. Follow the on-screen instructions to complete the setup.
4. Go to Picture Advanced and Picture Mode on your monitor, and select the game mode
you just downloaded to apply the settings directly.
(For XL2420Z / XL2720Z / XL2420G series)
1. Install Display Pilot from the provided CD.
2. Launch Display Pilot and select Tools > Game Mode Loader.
3. Click Check Now to check for new game modes.
4. To apply the downloaded game modes, select one from the drop-down list in Tools, and
click Apply.
Adjusting display mode
To display images of aspect ratios other than your monitor aspect ratio and sizes other than
your display size, you can adjust the display mode on the monitor. For the aspect ratio and
display size of your monitor, see the specifications on the CD.
1. Press any of the control keys, or the wheel, or the return button on the S Switch to bring
up the hot key menu, and press Menu to access the main menu.
2. Go to Picture Advanced and Display Mode.
3. Select an appropriate display mode. The setting will take effect immediately.
BenQ offers more optimized game modes on the website. If you prefer to use these settings, refer to
Downloading more game modes using Game Mode Loader on page 40.
• Internet connection is required for this operation.
• For models with G-SYNC module, Game Mode Loader is available in Classic mode only.
Switch to the desired display mode first, and follow the instructions in Using Smart Scaling on page 41 to adjust
the display size to precisely suit your needs.
41 How to adjust your monitor
Using Smart Scaling
You can resize your display by Smart Scaling.
1. Go to Picture Advanced and Smart Scaling.
2. Adjust the value.
Using Instant Mode
While playing games, you can diminish the input lag by activating Instant Mode.
1. Go to Picture and Instant Mode.
2. Select On.
Switching between Classic and G-SYNC modes (for models
with G-SYNC module only)
If your monitor came with a G-SYNC module, you might want to switch between the Classic
and G-SYNC modes to suit your needs. Note that each mode goes with its own OSD menus
and is available for certain input source only.
Modes and the required input source
Refer to the following table for modes and the required input source. You are recommended to
connect the DP cable only to your monitor if G-SYNC mode is desired to ensure all the
G-SYNC functions and settings work properly.
Switching between modes
1. Depending on the desired mode, connect the required input source to your monitor. See
Connect the PC video cable on page 14 for more information.
2. Press the first control key (designated for Engine Switch) and select the desired mode. It
takes a few seconds before the monitor is restarted and enters the selected mode.
3. For further setup, press any of the control keys to bring up the hot key menu, and select
Menu.
• If one of the custom keys is preset for Smart Scaling, you can press the custom key and adjust the value
directly.
• Your display may become unstable temporarily when being resized. This is a normal phenomenon and should
not be considered as manufacturing defect.
• For more information on Smart Scaling, go to Smart Scaling on page 52.
Check if a compatible graphics processing units (GPU) with the latest driver files have been installed to your
computer. Visit http://www.geforce.com/hardware/technology/g-sync for details.
Mode Input source
Classic DVI-D
HDMI
G-SYNC DP
42 How to adjust your monitor
4. If your are desired to switch to another mode, start with Step 2 again.
If you are prompted with the message No Cable Connected
or No Signal Detected
, check the following:
- if the cable connection required for the selected mode has been established properly.
- if the video source is available to your monitor.
If 2 input sources are connected to your monitor for Classic and modes separately, chances are that G-SYNC
the computer compatibility may lead to video signal output error on the monitor. Try the following to solve the
problem.
• Unplug and plug back the power cord of the monitor.
• Switch between Classic and G-SYNC modes again.
43 Navigating the main menu
Navigating the main menu
You can use the OSD (On Screen Display) menu to adjust all the settings on your monitor.
Press any of the control keys, or the wheel, or the return button on the S Switch to bring up
the hot key menu. Select Menu to enter the main menu. See Basic menu operation on page 35
for details.
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out. And keys that are not available will be
disabled and the corresponding OSD icons will disappear. For models without certain
functions, their settings and related items will not appear on the menu.
For more information on each menu, please refer to the following pages:
• Display menu on page 44
• Picture menu on page 47
• Picture Advanced menu on page 50
• Save Settings menu on page 54
• Audio menu on page 55
• System menu on page 56
OSD menus for models with G-SYNC module
If your monitor came with a G-SYNC module, you are provided with 2 sets of OSD menus
with their own options: Classic
and G-SYNC
.
For more information on each menu in Classic mode, please refer to the following pages:
• Engine Switch menu on page 46
• Picture menu on page 47
• Picture Advanced menu on page 50
• Save Settings menu on page 54
• Audio menu on page 55
• System menu on page 56
For more information on each menu in G-SYNC mode, please refer to the following pages:
• G-SYNC mode: Engine Switch menu on page 60
• G-SYNC mode: Picture menu on page 61
• G-SYNC mode: Picture Advanced menu on page 63
• G-SYNC mode: System menu on page 65
The OSD menu languages may differ from the product supplied to your region, see Language
on page 57
/
Language on page 66 under System and OSD Settings for more details.
44 Navigating the main menu
Display menu
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out. And keys that are not available will be
disabled and the corresponding OSD icons will disappear. For models without certain functions,
their settings and related items will not appear on the menu.
1. Select Menu from the hot key menu.
2. Use or to select Display.
3. Select to go to a sub menu, and then use or to select a menu item.
4. Use or to make adjustments, or use to make selection.
5. To return to the previous menu, select .
6. To exit the menu, select .
Item Function Range
Auto Adjustment Optimizes and adjusts the screen settings
automatically for you.
Not applicable to a digital input signal.
H. Position Adjusts the horizontal position of the screen image. 0 to 100
V. Position Adjusts the vertical position of the screen image. 0 to 100
Pixel Clock Adjusts the pixel clock frequency timing to
synchronize with the analog input video signal.
See also: Picture optimization on page 39.
Not applicable to a digital input signal.
0 to 100
50
Auto Adjustment
H.Position
V.Postion
Pixel Clock
Phase
Mode: Standard
Display
Picture
Picture Advanced
Save Settings
Audio
System
45 Navigating the main menu
Phase Adjusts the pixel clock phase timing to synchronize
with the analog input video signal.
See also: Picture optimization on page 39.
Not applicable to a digital input signal.
0 to 63
Item Function Range
46 Navigating the main menu
Engine Switch menu
(for models with G-SYNC module only)
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out. And keys that are not available will be
disabled and the corresponding OSD icons will disappear. For models without certain functions,
their settings and related items will not appear on the menu.
1. Select Menu from the hot key menu.
2. Use or to select Engine Switch.
3. Select to go to a sub menu, and then use or to select a menu item.
4. Use or to make adjustments, or use to make selection.
5. To return to the previous menu, select .
6. To exit the menu, select .
Item Function Range
G-SYNC Switches to G-SYNC mode.
It works when video source through DP cable is
connected to the monitor.
Classic Switches to Classic mode.
It works when video source through DVI-DL or HDMI
cable is connected to the monitor.
50
G-SYNC
Classic
Mode: Standard
Engine Switch
Picture
Picture Advanced
Save Settings
Audio
System
Specyfikacje produktu
| Marka: | BenQ |
| Kategoria: | monitor |
| Model: | XL2720T |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z BenQ XL2720T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje monitor BenQ
8 Kwietnia 2025
7 Kwietnia 2025
21 Lutego 2025
21 Lutego 2025
14 Stycznia 2025
13 Stycznia 2025
12 Stycznia 2025
11 Stycznia 2025
8 Stycznia 2025
9 Grudnia 2024
Instrukcje monitor
- monitor Viotek
- monitor Adj
- monitor Joy-It
- monitor Christie
- monitor ProXtend
- monitor Drawmer
- monitor Hercules
- monitor ProDVX
- monitor AORUS
- monitor Garmin
- monitor Chimei
- monitor Elite Screens
- monitor GlobalTronics
- monitor Tannoy
- monitor Corsair
Najnowsze instrukcje dla monitor
8 Kwietnia 2025
8 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025