Instrukcja obsługi BenQ SP820

BenQ Projektor SP820

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BenQ SP820 (48 stron) w kategorii Projektor. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/48
Copyright
This publication, including all photographs, illustrations and software, is protected under international copy-
right laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be
reproduced without written consent of the author.
© Copyright July, 2007
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no repre-
sentations or warranties with respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
Trademark Recognition
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations and pend-
ing applications in other countries throughout the world.
All other product names used in this manual are the properties of their respective owners and are ac-
knowledged.
i
D
D
DL
L
LP
P
P
P
P
Pr
r
ro
o
oj
j
je
e
ec
c
ct
t
to
o
or
r
r
U
U
Us
s
se
e
er
r
r
s
s
s
M
M
Ma
a
an
n
nu
u
ua
a
al
l
l
ii
Important Safety Information
Congratulations on purchasing the DLP projector!
Important:
It is strongly recommended that you read this section carefully before using the projector. These
safety and usage instructions will ensure that you enjoy many years of safe use of the projector.
Keep this manual for future reference.
Symbols Used
Warning symbols are used on the unit and in this manual to alert you of hazardous situations.
The following styles are used in this manual to alert you to important information.
Note:
Provides additional information on the topic at hand.
Important:
Provides additional information that should not be overlooked.
Caution:
Alerts you to situations that may damage the unit.
Warning:
Alerts you to situations that may damage the unit, create a hazardous environment, or cause per-
sonal injury.
Throughout this manual, component parts and items in the OSD menus are denoted in bold font as in this
example:
“Push the Menu button on the remote control to open the Main menu.”
Remote Control
Some remote controls have a laser for pointing out items on a screen.
DANGER: Do not point the laser in the eyes. Doing so can damage the eyes permanently.
General Safety Information
¾ Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts in
the unit. For servicing, contact qualified service personnel.
¾ Follow all warnings and cautions in this manual and on the unit case.
¾ The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into the
lens when the lamp is on.
¾ Do not place the unit on an unstable surface, cart, or stand.
¾ Avoid using the system near water, in direct sunlight, or near a heating device.
¾ Do not place heavy objects such as books or bags on the unit.
P
P
Pr
r
re
e
ef
f
fa
a
ac
c
ce
e
e
– – iii
Power Safety
¾ Only use the supplied power cord.
¾ Do not place anything on the power cord. Place the power cord where it will not be in the way of
foot traffic.
¾ Remove the batteries from the remote control when storing or not in use for a prolonged period.
Replacing the Lamp
Replacing the lamp can be hazardous if done incorrectly. Refer to Replacing the Projection Lamp on page
29 for clear and safe instructions for this procedure. Before replacing the lamp:
¾ Unplug the power cord.
¾ Allow the lamp to cool for about one hour.
Cleaning the Projector
¾ Unplug the power cord before cleaning. Refer to Cleaning the Projector on page 32.
¾ Allow the lamp to cool for about one hour.
Regulatory Warnings
Before installing and using the projector, read the regulatory notices in the Regulatory Compliance section
on page 42.


Specyfikacje produktu

Marka: BenQ
Kategoria: Projektor
Model: SP820

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z BenQ SP820, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Projektor BenQ

BenQ

BenQ TK700ST Instrukcja

23 Grudnia 2024
BenQ

BenQ DCP10 Instrukcja

9 Grudnia 2024
BenQ

BenQ GV50 Instrukcja

8 Października 2024
BenQ

BenQ HT3560 Instrukcja

5 Października 2024
BenQ

BenQ LH720 Instrukcja

2 Października 2024
BenQ

BenQ LU935 Instrukcja

30 Września 2024
BenQ

BenQ LW855UST Instrukcja

29 Września 2024
BenQ

BenQ LK935 Instrukcja

29 Września 2024
BenQ

BenQ LH856UST Instrukcja

29 Września 2024
BenQ

BenQ LU960ST2 Instrukcja

29 Września 2024

Instrukcje Projektor

Najnowsze instrukcje dla Projektor