Instrukcja obsługi BenQ MX703

BenQ Projektor MX703

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BenQ MX703 (8 stron) w kategorii Projektor. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
Network Projector Operation Guide
Table of contents2
Table of contents
Preparation.......................................................................................3
Connecting the projector with your
computer ..........
..............................3 Wired connection...................................................................................................................... 3
Controlling the projector remotely through a web
browser.............................................................................................5
Supported Resolutions ....................................................................................6
PJLink Commands...........................................................................7
Preparation 3
Preparation
Your BenQ projector is equipped with the wired and/or wireless network function. You
can manage and control the projector from one or more remote computers using a web
browser when they are properly connected to the same local area network.
Connecting the projector with your computer
Wired connection
If you are in a DHCP environment:
1. Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the projector
and the other end to the RJ45 port on your Ethernet or router.
2. Do one of the following:
Press NETWORK SETTING on the remote control. The Network
Settings page is displayed.
Press MENU/EXIT and then press / until the SYSTEM SETUP:
Advanced menu is highlighted. Press to highlight Network Settings and
press MODE/ENTER. The Network Settings page is displayed.
3. Highlight Wired LAN and press MODE/ENTER.
4. Make sure the Status
is
Connect.
5. Press to highlight DHCP and press / to select On.
6. Press to highlight Apply and press MODE/ENTER.
7. Re-enter the Network Settings > Wired LAN page. The IP Address, Subnet
Mask, Default Gateway, and DNS settings will be displayed. Note down the IP
address displayed in the IP Address row.
If the IP Address still does not appear, contact your ITS administrator.
If you are in a non-DHCP environment:
1. Repeat steps 1-4 above.
2. Press to highlight DHCP and press / to select Off.
3. Contact your ITS administrator for information on the IP Address, Subnet Mask,
Default Gateway, and DNS settings.
4. Press to select the item you want to modify and press MODE/ENTER.
Wired LAN
Laptop computer
Desktop computer
Projector
RJ45 cable
RJ45 cable
RJ45 cable


Specyfikacje produktu

Marka: BenQ
Kategoria: Projektor
Model: MX703

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z BenQ MX703, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Projektor BenQ

BenQ

BenQ TK700ST Instrukcja

23 Grudnia 2024
BenQ

BenQ DCP10 Instrukcja

9 Grudnia 2024
BenQ

BenQ GV50 Instrukcja

8 Października 2024
BenQ

BenQ HT3560 Instrukcja

5 Października 2024
BenQ

BenQ LH720 Instrukcja

2 Października 2024
BenQ

BenQ LU935 Instrukcja

30 Września 2024
BenQ

BenQ LW855UST Instrukcja

29 Września 2024
BenQ

BenQ LK935 Instrukcja

29 Września 2024
BenQ

BenQ LH856UST Instrukcja

29 Września 2024
BenQ

BenQ LU960ST2 Instrukcja

29 Września 2024

Instrukcje Projektor

Najnowsze instrukcje dla Projektor