Instrukcja obsługi Beko WMD26101T

Beko pralka WMD26101T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Beko WMD26101T (48 stron) w kategorii pralka. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/48
-1- ENG
Control Panel
Program Selection and Starting Machine
1
Plug your machine to outlet. Turn on the machine by pressing
“On / Off” key. Open the door by pulling the handle and load the
machine without exceeding loading capacity and close the door.
Specify the appropriate program by looking at program selec-
tion table according to type of laundry, degree of soiledness and
washing temperature. Position program selection key to desired
washing program-temperature. Select convenient spin speed re-
lated to selected program. If you are using auxiliary function press
desired auxiliary function key.
Afterwards place appropriate detergent and softener to your
machine’s detergent drawer. Start your machine by pressing
Start/Pause/Cancel button. Start/Pause/Cancel key’s led will be
on. After your machine starts, you can follow from the program
progress display at which step your machine is.
Program selection table
* Energy Labeling Program (EN 60456)
6
7
1 4 52 3
Wa s h i ng Ma c h i ne | U s er s Ma n u a l
WMD 26121 T
Program Type of laundry Max
Load
(kg)
Program
Duration
(min.)
Water
Con-
sumption
(lt)
Energy
Con-
sumption
(kWh)
Ex-
press
Rinse
Plus
Anti-
Creasing
Prewash + Cotton 90 Heavy soiled Durable fabrics made of cotton and linen
6 160 60 2.60
Cotton 90 Heavy soiled Durable fabrics made of cotton and linen
6 150 55 2.00
Cotton 60* Normal soiled cotton and linen durable to heat
6 140 49 1.14
Cotton 40 Less soiled cotton and linen sensitive to heat
6 125 49 0.70
Cotton cold Heavy soiled Durable fabrics made of cotton and linen
5 120 55 0.21 • •
Baby 65 Heavy soiled Durable fabrics made of cotton and linen (baby clothes etc.)
6 170 65 1.40
Prewash + Synthetic 60 Heavy soiled cotton/synthetic blended durable to heat
3 125 60 1.00
Synthetic 60 Normal soiled cotton/synthetic blended durable to heat
3 115 55 0.90
Synthetic 40 Less soiled cotton/synthetic blended durable to heat
3 105 55 0.50
Synthetic cold Very Less soiled or cotton/synthetic blended sensitive to heat
2.5 90 55 0.12
Mix 40 Normal soiled cotton and linen sensitive to heat
3.5 95 55 0.50 • •
Delicate 40 Delicate, sensitive synthetic, cotton blended
2 70 60 0.35 • •
Delicate 30 Delicate, sensitive synthetic, cotton blended
2 65 60 0.25 • •
Woolen 40 Woolen and delicate blended with machine wash label
1.5 55 55 0.30
Woolen cold Woolen and delicate laundry with machine wash sign
1.5 45 55 0.03
Handwash 30 Special program for silk, cashmere or laundry with no machine wash sign
1 40 35 0.15
Mini 30 Special program for Less soiled linens
2.5 30 45 0.25
Rinse Rinse Program
6 23 13 0.04
Spin Spin Program
6 13 - 0.03
WMD 26101 T
-2- ENG
This product is designed for home use.
If the fuse in your house is less than 16A than have a certied
electrician deploy an 16A fuse.
In case of transformer or non-transformer use, grounding
installation must be performed with a licensed electrician. Any
use before grounding is not our responsibility.
Please call certied service for a failure of electric plug / cable.
Never place your machine over a carpet covered oor.
At rst use, washing must be performed at Cotton 90°C
program without loading with laundry for getting your machine
ready for washing.
Performance of your washing machine depends on the quality
of water and hygiene compound used. If low quality and unt-
ting cleaning material is used the stains will be xed.
Because of quality control procedures there might be little
amount of water in your machine. This does not have any
damage to your machine.
• Your machine is programmed for starting operation again
when electricity is off and on afterwards. You can not press
On / Off button to cancel program. Machine will go on pro-
gram when electricity is on. To CANCEL the program press
>Start/Pause/Cancel< button for three seconds. (See. Can-
celling a program)
After your machine starts operation, if Start/Pause/Cancel key
starts blinking than door is not locked. Open and close the
door again begin washing program again.
If the “washing” led on the program progress display is blink-
ing either there is no water or tap is off. Check your taps. Turn
your machine off and on. If the problem persists unplug your
machine, turn off tap water and call authorized service.
If program is started and program selection can not be
performed your machine might be in protection mode due to
infrastructure problem (voltage, water pressure, etc.) Press
and hold the > Start/Pause/Cancel < button for 3 seconds in
order to switch machine to factory settings.
Before starting your machine please beware of below mentioned
points:
Did you plug the cable?
Did you connect draining hose correctly?
Did you close front door?
Did you open tap water?
Sorting the Laundry
Sort laundry according to type of fabric, color, level of dirtiness
and allowed washing temperature. Do not wash white laundry
together with colored ones. Remove hard parts like belt, wrist
button, curtain buttons, etc. or place laundry in a cloth bag.
Empty pockets. Zip up and button up. Very tiny laundry like baby
clothes may get into inside of drum, midst of bellow, pump lter,
hose, etc. in order to prevent this it is advised to place such laun-
dry in a special laundry string bag or large laundry. Your machine
can wash “Machine Wash” or “No-matting” labeled woolen with
special woolen program. Delicate laundry with “Do not wash”
or “hand wash” label (silk, cashmere, pure wool, etc.) can be
washed in the special hand-wash program.
Opening front door
Pull the handle to open the front door. Your machine’s front door
is designed for opening during only machine is not operating. If
the led displays “door” than door can open.
Loading machine with laundry
Fill the machine by unfolding and not squeezing laundry. Place
hand-woven garments inside-out to the machine. Make sure there
is no laundry jammed between bellow and front-door.
Close the loading door by pushing. If loading door is not properly
closed machine will not start.
Selection of detergent and softener
Quantity of the detergent used depends on hardness of water and
how soiled laundry is. Recommended values are indicated on the
package. If your laundry is low soiled and/or hardness of water is
low use less detergent as indicated on the package. Otherwise it
may result in excessive foam.
You should use detergent specially designed for automatic wash-
ing machines. Avoid using bleach product containing sulfur or chlo-
rine. Place powder detergent and softener in appropriate drawer
compartment and close detergent dispenser.
a. powder detergent drawer for pre-wash.
b. powder detergent drawer for main wash.
c. Softener dispenser
d. Siphon
Fill the softener as indicated (usually <100ml; 1 tea bag) on pack-
age. Never ll more than “MAX” level. Excess amount will drain to
suction cup and be wasted. You might need to ll softener again.
If softener is thickened over time add some water for thinning.
Softener may obstruct siphon and block ow.
Auxiliary Functions
Express: Shortens washing time for lightly soiled fabrics. This
function can be used for cotton and synthetic programs for tem-
peratures below 60°C.
Rinse plus: By using this function your machine will add another
rinse process to the three rinse processes that it has already
done. This additional rinse will reduce any affects on sensitive skin
by washing leftover detergent.
Anti-creasing: To avoid wrinkling of your clothes, select this
function. When anti-creasing is chosen please load less cloth,
this way a special washing and spinning profile will reduce the
wrinkles and your clothes will be easy to iron.
3Warning
4Preparation
Technical Features of Your Washing Machine
There may be changes in the technical features
without prior notice in order to enhance prod-
uct quality.
The gures in the manual are schematic and
may not represent your actual machine one-to-
one.
Labelling on your product and ones declared
in the documents accompanying product are
the values obtained under laboratory conditions
with given standards. These values may vary
according to usage and environmental condi-
tions.
2
Model WMD 26121 T WMD 26101 T
Maximum dry laundry capacity (kg.) 6 6
Height x Width x Depth (cm.) 84 x 60 x 54 84 x 60 x 54
Net Weight (kg.) 70 70
Electricity (V/Hz.) 230/50 230/50
Total Current (A) 10 10
Total Power (W) 2200 2200
Washing -rinsing cycle (cyc/min) 52 52
Spinning cycle (max cyc/min) 1200 1000
-3- ENG
Detergent Dispenser
Powder detergent residue may accumulate in drawer after a
while. In order to clean detergent drawer press the marked point
of the siphon on softener compartment and push the drawer
towards yourself. Wash the drawer with water
Siphon
Do not neglect cleaning suction cup when it becomes soiled. In
order take suction cup out rst take detergent drawer out. Clean
it in order to eliminate blocking by softener residue. After cleaning
place suction cup to its place and make sure it is placed properly.
5Care and maintanence
Spin speed selection knob: You can spin the laundry up to
1200 cycle / min. with the models having cycle selection button.
Your machine will spin not more than 800 cycle / min. for syn-
thetic programs and 600-400 cycle/min. for woollen programs. In
addition if you do not want to spin your laundry you may choose
“No Spin” position.
Pressing “On/Off”
By pressing “On/Off” button you can make your machine ready
for selecting program. When “On/Off” key is pressed “door” led
will light on meaning “door can open”. Press “On/Off” key again
for turning your machine off.
Pressing “On/Off” does not mean program started operation. You
must press “Start/Pause/Cancel” for starting the program.
Child-proof lock
During washing laundry in order to
maintain that program progress is not
affected by pressing keys by children
there is child-proof lock. To enable
child-proof lock, after washing begins,
press Express and Rinse Plus function
buttons together simultaneously for three seconds. Pre-wash ad-
ditional function led will always blink.
After program ends in order to start a new program or alter the
program you have to disable child-proof lock. To do this press
same buttons for three seconds and Child-proof lock led will be
off.
Function Selection
Additional functions selectable according to selected program can
be selected by pressing related key. Led of selected function will
be on.
If not selected together some additional functions go off when it
is not selected with other one. For example; when using cotton
program, exspress and rinse plus auxillary functions can not be
selected together. After selecting express program, if rinse plus
key is pressed fast program will be on and express function led
will go off.
Program Progress
After machine starts operation relevant program led on program
progress display will be on. When a step is completed that step’s
led is off and next step’s led is on. When program is completed
“Door” led will be on again.
During machine operation you can press “Start/Pause/Cancel”
key for getting machine to “Pause” position. In this case “Start/
Pause/Cancel” led will blink.
Changing Program
You can use this feature for washing laundry in the same textile
group for washing at lower or higher temperatures. For example,
instead of Cotton60, Cotton40 can be used. For selecting Cot-
ton40 instead of Cotton60 by pressing “Start/Pause/Cancel” key
machine is switched to pause position. Program knob is turned
for selecting Cotton40 program.
Even when the program selection knob is changed during the
program initially selected program will be executed. For changing
washing program continuing program must be cancelled.
Although selected auxillary functions must be compatible with
washing program.
Adding laundry
If you want to add laundry to your machine after program begins
press Start/Pause key for switching machine to pause mode. If
water level in the machine is appropriate “door” led on program
progress display is on and laundry can be added to the machine.
If “door” led is not on after one minute than water level in the ma-
chine is not appropriate and laundry can not be added. You can
press “Start/Pause/Cancel” key for continuing program.
Time delay for program start
Using time delay key you can delay the
starting of the selected program for 3
hours, 6 hours or 9 hours.
When time delay key is pressed once
3hours delay is adjusted and led will light
on. If same key is pressed once more delay
is 6hours, and if it is pressed once more 9
hours delay is selected. If time delay key is pressed again delay
is cancelled. After the selection of time delay when “Start/Pause/
Cancel” is pressed program can be started with delay. During
delay period door can be opened or laundry can be added
After time delay is initiated by pressing “Start/Pause/Cancel” you
can switch machine to “Pause” mode and change delay time.
Canceling a Program
For canceling a program “Start/Pause/Cancel” key is pressed for
three seconds. After this period “Start/
Pause/Cancel” and all other leds will
be off .You can select a new program
and start washing.
If cancel task is performed during
washing “Spin” led on display will
light on, machine will pump and when
“Spin” led is off “door” led will be on,
door can be opened and new pro-
gram can be selected.
After machine starts operation even if spin speed or washing
temperature is changed, initial speed and temperature is valid. In
order to change spin speed or temperature after pressing “Start/
Pause/Cancel” new cycle or temperature can be selected.
End of Program
When program ends “ door” led will light on and door can be
opened and machine is ready for next washing. Press “On/Off” for
turning machine off.
Emptying Laundry
After program ends machine automatically stops. Turn off tap wa-
ter. Pull the handle and open loading door. Turn off your machine
by pressing “On/Off”. After taking laundry out keep the loading
door open and let the drum ventilate. Check the bellow and clean.
3 h
6 h
9 h


Specyfikacje produktu

Marka: Beko
Kategoria: pralka
Model: WMD26101T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Beko WMD26101T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje pralka Beko

Beko

Beko B5W5941D Instrukcja

14 Października 2024
Beko

Beko BM1WU3741 Instrukcja

14 Października 2024
Beko

Beko B5W1241A Instrukcja

14 Października 2024
Beko

Beko BM3WT4841I Instrukcja

14 Października 2024
Beko

Beko B5W59411A Instrukcja

14 Października 2024
Beko

Beko B3W31041 Instrukcja

14 Października 2024
Beko

Beko BM3WT4104I Instrukcja

14 Października 2024
Beko

Beko BM3WT3841 Instrukcja

14 Października 2024
Beko

Beko B3W5941I Instrukcja

14 Października 2024
Beko

Beko BM1WT3721 Instrukcja

14 Października 2024

Instrukcje pralka

Najnowsze instrukcje dla pralka

Candy

Candy CS 15102D3-80 Instrukcja

15 Października 2024
GE

GE GSD3715FAA Instrukcja

15 Października 2024
Siemens

Siemens iQ700 WI14W540EU Instrukcja

15 Października 2024
LG

LG WTP22BK Instrukcja

15 Października 2024
Freggia

Freggia WTIE148 Instrukcja

15 Października 2024
Freggia

Freggia WISE126R Instrukcja

15 Października 2024
Freggia

Freggia WISE126B Instrukcja

15 Października 2024
Freggia

Freggia WISE126 Instrukcja

15 Października 2024
Freggia

Freggia WISA105 Instrukcja

15 Października 2024
Freggia

Freggia WISA106 Instrukcja

15 Października 2024