Instrukcja obsługi Beko WMB 71041

Beko pralka WMB 71041

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Beko WMB 71041 (56 stron) w kategorii pralka. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/56

Washing Machine

Lave-linge

WMB 71041

WMB 71241

WMB 71241 S

2EN

1 Important safety instructions

This section contains safety instructions that will

help protect from risk of personal injury or property

damage. Failure to follow these instructions shall void

any warranty.

General safety

• 8yearsandolderchildrenandpeoplewith

reduced physical, sensory, and mental abilities

as well as unskilled or inexperienced persons

can use this appliance provided that they are

supervised and instructed on safe use of the

appliance as well as to the related dangers.

Children should not play or tamper with the

appliance. Cleaning and user maintenance

should never be performed by children unless

supervised by a responsible adult.

• Neverplacetheproductonacarpet-covered

floor; otherwise, lack of airflow beneath the

machine will cause electrical parts to overheat.

This will cause problems with your product.

• Donotoperatetheproductifthepowercable

/ plug is damaged. Call the Authorized Service

Agent.

• Haveaqualifiedelectricianconnecta

16-Amperefusetotheinstallationlocationofthe

product.

• Iftheproducthasafailure,itshouldnotbe

operated unless it is repaired by the Authorized

Service Agent. There is the risk of electric shock!

• Thisproductisdesignedtoresumeoperating

in the event of powering on after a power

interruption.Ifyouwishtocancelthe

programme, see "Cancelling the programme"

section.

• Connecttheproducttoagroundedoutlet

protected by a fuse complying with the values

inthe"Technicalspecifications"table.Donot

neglect to have the grounding installation made

byaqualifiedelectrician.Ourcompanyshall

not be liable for any damages that will arise

when the product is used without grounding in

accordance with the local regulations.

• Thewatersupplyanddraininghosesmustbe

securely fastened and remain undamaged.

Otherwise,thereistheriskofwaterleakage.

• Neveropentheloadingdoororremovethefilter

whilethereisstillwaterinthedrum.Otherwise,

risk of flooding and injury from hot water will

occur.

• Donotforceopenthelockedloadingdoor.The

loading door will be ready to open just a few

minutes after the washing cycle comes to an

end.Incaseofforcingtheloadingdoortoopen,

the door and the lock mechanism may get

damaged.

• Unplugtheproductwhennotinuse.

• Neverwashtheproductbyspreadingorpouring

water onto it! There is the risk of electric shock!

• Nevertouchtheplugwithwethands!Never

unplug by pulling on the cable, always pull out

by grabbing the plug.

• Usedetergents,softenersandsupplements

suitable for automatic washing machines only.

• Followtheinstructionsonthetextiletagsandon

the detergent package.

• Theproductmustbeunpluggedduring

installation, maintenance, cleaning and repairing

procedures.

• Alwayshavetheinstallationandrepairing

procedures carried out by the Authorized

Service Agent. Manufacturer shall not be

held liable for damages that may arise from

procedures carried out by unauthorized

persons.

Intended use

• Thisproducthasbeendesignedfordomestic

use.Itisnotsuitableforcommercialuseandit

must not be used out of its intended use.

• Theproductmustonlybeusedforwashingand

rinsing of laundry that are marked accordingly.

• Themanufacturerwaivesanyresponsibility

arisen from incorrect usage or transportation.

Children's safety

• Electricalproductsaredangerousforthe

children. Keep children away from the product

whenitisinuse.Donotletthemtotamperwith

theproduct.Usechildlocktopreventchildren

from intervening with the product.

• Donotforgettoclosetheloadingdoorwhen

leaving the room where the product is located.

2 Installation

Refer to the nearest Authorised Service Agent for

installation of the product. To make the product ready

for use, review the information in the user manual

and make sure that the electricity, tap water supply

and water drainage systems are appropriate before

callingtheAuthorizedServiceAgent.Iftheyarenot,

callaqualifiedtechnicianandplumbertohaveany

necessary arrangements carried out.

C Preparation of the location and electrical, tap

water and waste water installations at the place

of installation is under customer's responsibility.

B Installationandelectricalconnectionsofthe

product must be carried out by the Authorized

Service Agent. Manufacturer shall not be

held liable for damages that may arise from

procedures carried out by unauthorized

persons.

A Prior to installation, visually check if the product

hasanydefectsonit.Ifso,donothaveit

installed.Damagedproductscauserisksfor

your safety.

C Make sure that the water inlet and discharge

hoses as well as the power cable are not

folded, pinched or crushed while pushing the

product into its place after installation or cleaning

procedures.

Appropriate installation location

• Placethemachineonarigidfloor.Donotplace

it on a long pile rug or similar surfaces.

• Totalweightofthewashingmachineandthe

dryer-withfullload-whentheyareplaced

ontopofeachotherreachestoapprox.180

kilograms. Place the product on a solid and flat

floor that has sufficient load carrying capacity!

3EN

• Donotplacetheproductonthepowercable.

• Donotinstalltheproductatplaceswhere

temperaturemayfallbelow0ºC.

• Placetheproductatleast1cmawayfromthe

edges of other furniture.

Removing packaging reinforcement

Tilt the machine backwards to remove the packaging

reinforcement. Remove the packaging reinforcement

by pulling the ribbon.

Removing the transportation locks

A Donotremovethetransportationlocksbefore

taking out the packaging reinforcement.

A Remove the transportation safety bolts before

operating the washing machine, otherwise, the

product will be damaged.

1. Loosen all the bolts with a spanner until they

rotate freely (C).

2. Remove transportation safety bolts by turning

them gently.

3. AttachtheplasticcoverssuppliedintheUser

Manual bag into the holes on the rear panel. (P)

C Keep the transportation safety bolts in a safe

place to reuse when the washing machine

needs to be moved again in the future.

C Never move the product without the

transportation safety bolts properly fixed in

place!

Connecting water supply

C Thewatersupplypressurerequiredtorunthe

productisbetween1to10bars(0.1–10MPa).

Itisnecessarytohave10–80litersofwater

flowing from the fully open tap in one minute

to have your machine run smoothly. Attach a

pressure reducing valve if water pressure is

higher.

C Ifyouaregoingtousethedoublewater-inlet

productasasingle(cold)water-inletunit,you

must install the supplied stopper to the hot

water valve before operating the product.

(Applies for the products supplied with a blind

stopper group.)

C Ifyouwanttousebothwaterinletsofthe

product, connect the hot water hose after

removing the stopper and gasket group from

the hot water valve. (Applies for the products

supplied with a blind stopper group.)

A Models with a single water inlet should not be

connectedtothehotwatertap.Insuchacase

the laundry will get damaged or the product will

switch to protection mode and will not operate.

A Donotuseoldorusedwaterinlethoseson

thenewproduct.Itmaycausestainsonyour

laundry.

1. Connect the special hoses supplied with the

product to the water inlets on the product. Red

hose(left)(max.90ºC)isforhotwaterinlet,blue

hose(right)(max.25ºC)isforcoldwaterinlet.

A Ensure that the cold and hot water connections

are made correctly when installing the product.

Otherwise,yourlaundrywillcomeouthotatthe

end of the washing process and wear out.

2. Tighten all hose nuts by hand. Never use a

wrench when tightening the nuts.

3. Openthetapscompletelyaftermakingthe

hose connection to check for water leaks at

theconnectionpoints.Ifanyleaksoccur,turn

off the tap and remove the nut. Retighten the

nut carefully after checking the seal. To prevent

water leakages and damages caused by them,

keep the taps closed when the machine is not in

use.

Connecting to the drain

• Theendofthedrainhosemustbedirectly

connected to the wastewater drain or to the

washbasin.

A Your house will be flooded if the hose comes out

of its housing during water discharge. Moreover,

there is risk of scalding due to high washing

temperatures! To prevent such situations and to

ensure smooth water intake and discharge of

the machine, fix the end of the discharge hose

tightly so that it cannot come out.

• Thehoseshouldbeattachedtoaheightofat

least40cm,and100cmatmost.

• Incasethehoseiselevatedafterlayingiton

the floor level or close to the ground (less than

40cmabovetheground),waterdischarge

becomes more difficult and the laundry may

come out excessively wet. Therefore, follow the

heights described in the figure.

Specyfikacje produktu

Marka:	Beko
Kategoria:	pralka
Model:	WMB 71041

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Beko WMB 71041, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje pralka Beko

Beko WTV8814MMC1 Instrukcja

15 Stycznia 2025

Beko WMY71464STR1 Instrukcja

15 Stycznia 2025

Beko wmd 26145 Instrukcja

15 Stycznia 2025

Beko WTK72011 Instrukcja

15 Stycznia 2025

Beko WML 51021 EI Instrukcja

15 Stycznia 2025

Beko WEC84P64E2 Instrukcja

15 Stycznia 2025

Beko WTV 8140 XW0 Instrukcja

15 Stycznia 2025

Beko WMD 25100 TBL Instrukcja

15 Stycznia 2025

Beko BMWU3721A Instrukcja

14 Stycznia 2025

Beko BMWSU4721A Instrukcja

14 Stycznia 2025

Instrukcje pralka

Najnowsze instrukcje dla pralka

Samsung p 1453 gw Instrukcja

15 Stycznia 2025

Bauknecht WA Black 714 BW BK Instrukcja

15 Stycznia 2025

Daewoo DWD-FD1441 Instrukcja

15 Stycznia 2025

Indesit W 144 XS Instrukcja

15 Stycznia 2025

Whirlpool AWE 6720 Instrukcja

15 Stycznia 2025

Indesit WN860WSK Instrukcja

15 Stycznia 2025

Whirlpool WGD7000D Instrukcja

15 Stycznia 2025

AEG-Electrolux l 88819 Instrukcja

15 Stycznia 2025

AEG-Electrolux L88489FL Instrukcja

15 Stycznia 2025

Whirlpool AWO 8166 Instrukcja

15 Stycznia 2025