Instrukcja obsługi Beko RFNE200E32WN

Beko ZAMRAŻARKI RFNE200E32WN

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Beko RFNE200E32WN (138 stron) w kategorii ZAMRAŻARKI. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/138
GF200E40WCHN - RFNE200E40WN - RFNE200E32WN
58 5315 0000AD
1/2
EN / DE / FR / IT
Bedienungsanleitung
Gefrierschrank
Congélateur
Manuel d'utilisation
Manuale utente
Congelatore
Freezer
User manual
Please read this user manual first!
Dear Customer,
We hope that your product, which has been produced in modern plants and
checked under the most meticulous quality control procedures, will provide you
an effective service.
Therefore, read this entire user manual carefully before using the product and
keep it as a reference. If you handover the product to someone else, give the
user manual as well.
The user manual will help you use the product in a fast and safe
way.
Read the manual before installing and operating the product.
Make sure you read the safety instructions.
Keep the manual in an easily accessible place as you may need it later.
Read the other documents given with the product.
Remember that this user manual is also applicable for several other models.
Differences between models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
CImportant information or useful tips.
AWarning against dangerous conditions for life and property.
BWarning against electric voltage.
A
A
SUPPLIER’S NAME MODEL IDENTIFIER (*)
INFORMATION
C
The model information as stored in the product data base
can be reached by entering following website and searching
for your model identifier (*) found on energy label.
https://eprel.ec.europa.eu/
EN
4
1 Your Freezer 5
2 Important Safety Warnings 6
Intended use ...............................................6
General safety ............................................ 7
For products with a ................................ 11
water dispenser; ...................................... 11
Child safety ................................................ 11
Compliance with WEEE Directive and
Disposing of the Waste Product: .....12
Package information ..............................12
HC warning .................................................12
Things to be done for energy saving 13
3 Installation 14
Points to be paid attention to when the
relocation of the freezer ......................14
Electrical connection .............................15
Disposing of the packaging .................15
Disposing of your old freezer .............15
Placing and Installation.........................16
4 Preparation 18
5 Using your freezer 19
5.1 How to Freeze Fresh Foods ...... 20
5.2 Recommendations for
Preservation of Frozen Foods ............21
5.3 Defrosting ...........................................21
5.4 Deep Freezer Information ............21
5.5 Defrosting the frozen foods ....... 22
5.6 Recommended Temperature
Settings ...................................................... 22
6 Maintenance and
cleaning 25
Protection of plastic surfaces .......... 25
7 Troubleshooting 26
CONTENTS
EN
5
C Figures that take place in this instruction manual are schematic and may not
correspond exactly with your product. If the subject parts are not included in the
product you have purchased, then it is valid for other models.
1 Your Freezer
1. Thermostat
2. Flap (Fast-Freeze compartment)
3. Drawers
4. Adjustable front feet
1
4
4
2
3
*
EN
6
2 Important Safety Warnings
Please review the
following information.
Failure to observe this
information may cause
injuries or material
damage. Otherwise, all
warranty and reliability
commitments will
become invalid.
Original spare parts will
be provided for 10 years,
following the product
purchasing date.
Intended use
A
WARNING:
Keep ventilation
openings, in the
appliance enclosure
or in the built-in
structure, clear of
obstruction.
A
WARNING:
Do not use
mechanical devices
or other means
to accelerate the
defrostingprocess,
other than those
recommended by
the manufacturer.
A
WARNING:
Do not damage the
refrigerant circuit.
A
WARNING :
Do not use
e l e c t r i c a l
appliances inside
the food storage
c o m p a r t m e n t s
of the appliance,
unless they
are of the type
recommended by
the manufacturer.
A
WARNING:
Do not store
e x p l o s i v e
substances such
as aerosol cans
with a flammable
propellant in this
appliance.
This appliance is
intended to be used in
household and similar
applications such as
– staff kitchen areas in
shops, offices and other
working environments;
farm houses and by
clients in hotels, motels
EN
8
Do not damage the
parts, where the
refrigerant is circulating,
with drilling or cutting
tools. The refrigerant
that might blow out
when the gas channels
of the evaporator, pipe
extensions or surface
coatings are punctured
causes skin irritations
and eye injuries.
Do not cover or block
the ventilation holes on
your refrigerator with
any material.
Electrical devices must
be repaired by only
authorised persons.
Repairs performed by
incompetent persons
create a risk for the user.
In case of any failure or
during a maintenance or
repair work, disconnect
your refrigerators mains
supply by either turning
off the relevant fuse
or unplugging your
appliance.
Do not pull by the cable
when pulling off the
plug.
Ensure highly alcoholic
beverages are stored
securely with the lid
fastened and placed
upright.
Never store spray cans
containing flammable
and explosive
substances in the
refrigerator.
Do not use mechanical
devices or other means
to accelerate the
defrosting process,
other than those
recommended by the
manufacturer.
This product is not
intended to be used by
persons with physical,
sensory or mental
disorders or unlearned
or inexperienced
people (including
children) unless they are
attended by a person
who will be responsible
for their safety or who
will instruct them
accordingly for use of
the product
Do not operate a
damaged refrigerator.
EN
9
Consult with the service
agent if you have any
concerns.
Electrical safety of your
refrigerator shall be
guaranteed only if the
earth system in your
house complies with
standards.
Exposing the product
to rain, snow, sun and
wind is dangerous with
respect to electrical
safety.
Contact authorized
service when there is a
power cable damage to
avoid danger.
Never plug the
refrigerator into the
wall outlet during
installation. Otherwise,
risk of death or serious
injury may arise.
This refrigerator is
intended for only
storing food items. It
must not be used for
any other purpose.
Label of technical
specifications is located
on the left wall inside
the refrigerator.
Never connect
your refrigerator to
electricity-saving
systems; they may
damage the refrigerator.
If there is a blue light
on the refrigerator, do
not look at the blue light
with optical tools.
For manually controlled
refrigerators, wait for at
least 5 minutes to start
the refrigerator after
power failure.
This operation manual
should be handed in to
the new owner of the
product when it is given
to others.
Avoid causing damage
on power cable when
transporting the
refrigerator. Bending
cable may cause fire.
Never place heavy
objects on power cable.
Do not touch the plug
with wet hands when
plugging the product
EN
10
Do not plug the
refrigerator if the wall
outlet is loose.
Water should not be
sprayed on inner or
outer parts of the
product for safety
purposes.
Do not spray
substances containing
inflammable gases such
as propane gas near the
refrigerator to avoid fire
and explosion risk.
Never place containers
filled with water on top
of the refrigerator; in
the event of spillages,
this may cause electric
shock or fire.
Do not overload the
refrigerator with food.
If overloaded, the food
items may fall down and
hurt you and damage
refrigerator when you
open the door.
Never place objects on
top of the refrigerator;
otherwise, these
objects may fall down
when you open or close
the refrigerators door.
As they require a precise
temperature, vaccines,
heat-sensitive medicine
and scientific materials
and etc. should not be
kept in the refrigerator.
If not to be used for a
long time, refrigerator
should be unplugged.
A possible problem in
power cable may cause
fire.
Refrigerator may move
if adjustable legs are not
properly secured on the
floor. Properly securing
adjustable legs on the
floor can prevent the
refrigerator to move.
When carrying the
refrigerator, do not hold
it from door handle.
Otherwise, it may be
snapped.
When you have to place
your product next to
another refrigerator or
freezer, the distance
EN
14
3 Installation
BThe manufacturer will not be
liable for any event caused by
disregarding the information
supplied in this user manual.
Points to be paid attention
to when the relocation of
the freezer
1. Your freezer should be
unplugged.Before transportation of
your freezer, it should be emptied
and cleaned.
2. Before it is re-packaged,
shelves, accessories, crisper, etc.
inside your freezer should be fixed
with adhesive tape and secured
against impacts. Packaging should
be adequate and the transportation
rules on the package should be
strictly observed.
3. Original packaging and foam
materials should be kept for future
transportations or moving.
Before you start the freezer,
Check the following before you
start to use your freezer:
1. Attach 2 plastic wedges as
illustrated below. Plastic wedges
are intended to keep the distance
which will ensure the air circulation
between your freezer and the
wall. (The picture is drawn up as
a representation and may not be
identical with your product.)
2. Clean the interior of the freezer
as recommended in the “Maintenance
and cleaning” section.
3. Connect the plug of the freezer
to the wall socket. When the freezer
door is opened,freezer internal lamp
will turn on.
The condenser of your appliance is located on the back as shown below. In order
to achieve better energy efficiency with lower energy consumption, please pull
the condenser towards yourself as illustrated in picture below.
*may not be available in all models
PULL
PULL
better energy
efficiency
initial position
EN
16
Placing and Installation
A If the entrance door of the room
where the freezer will be installed is
not wide enough for the freezer to
pass through, then carefully remove
the doors of your freezer and pass it
sideways through the door.
1. Install your freezer to a place
that allows ease of use.
2. Keep your freezer away from
heat sources, humid places and direct
sunlight.
3. There must be appropriate
air ventilation around your freezer
in order to achieve an efficient
operation. If the freezer is to be
placed in a recess in the wall, there
must be at least 5 cm distance with
the ceiling and at least 5 cm with the
wall. Do not place your product on the
materials such as rug or carpet.
4. Place your freezer on an even
floor surface to prevent jolts.
5. Your product requires adequate
air circulation to function efficiently.
If the product will be placed in an
alcove, remember to leave at least 5
cm clearance between the product
and the ceiling, rear wall and the side
walls.
6. If the product will be placed
in an alcove, remember to leave at
least 5 cm clearance between the
product and the ceiling, rear wall and
the side walls. Check if the rear wall
clearance protection component is
present at its location (if provided
with the product). If the component
is not available, or if it is lost or fallen,
position the product so that at least
5 cm clearance shall be left between
the rear surface of the product and
the wall of the room. The clearance
at the rear is important for efficient
operation of the product.
EN
18
4 Preparation
For a freestanding appliance;
‘this refrigerating appliance is not
intended to be used as a built-in
appliance’ .
Your refrigerator should be installed
at least 30 cm away from heat
sources such as hobs, ovens, central
heater and stoves and at least 5
cm away from electrical ovens and
should not be located under direct
sunlight.
The ambient temperature of
the room where you install your
refrigerator should at least be -15°C.
Operating your refrigerator under
colder conditions than this is not
recommended.
Please make sure that the interior
of your refrigerator is cleaned
thoroughly.
If two refrigerators are to be
installed side by side, there should
be at least 2 cm distance between
them.
When you operate your refrigerator
for the first time, please observe the
following instructions during the
initial six hours.
The door should not be opened
frequently.
It must be operated empty without
any food in it.
Do not unplug your refrigerator. If
a power failure occurs out of your
control, please see the warnings in
the “Recommended solutions for
the problemssection.
Original packaging and foam
materials should be kept for future
transportations or moving.
The baskets/drawers that are
provided with the chill compartment
must always be in use for low energy
consumption and for better storage
conditions.
Food contact with the temperature
sensor in the freezer compartment
may increase energy consumption
of the appliance. Thus any contact
with the sensor(s) must be avoided.
In some models, the instrument
panel automatically turns off 5
minutes after the door has closed.
It will be reactivated when the door
has opened or pressed on any key.
Due to temperature change as
a result of opening/closing the
product door during operation,
condensation on the door/body
shelves and the glass containers is
normal.
Since hot and humid air will not
directly penetrate into your
product when the doors are not
opened, your product will optimize
itself in conditions sufficient to
protect your food. Functions and
components such as compressor,
fan, heater, defrost, lighting,
display and so on will operate
according to the needs to
consume minimum energy under
these circumstances.
EN
19
5 Using your freezer
C Figures that take place in this instruction manual are schematic and may not
correspond exactly with your product. If the subject parts are not included in the
product you have purchased, then it is valid for other models.
1 2 3 4
1.Freezer Set Function
This function allows you to make the
freezer compartment temperature
setting.
Press this button to set the
temperature of the freezer
compartment to - (warmest), --, ---,
----, ----- (coldest) respectively.
2.High Temperature Error /
Warning Indicator
This light comes on during high
temperature failures and error
warnings.
3- Quick Frezee Indicator
This icon lits when the Quick Freeze
function is active.
4-Quick Frezee Function
When you press Quick Freeze button,
the temperature of the compartment
will be colder than the adjusted values.
This function can be used for food
placed in the freezer compartment
and required to be cooled down rapidly.
If you want to cool large amounts
of fresh food, it is recommended to
active this feature before putting the
food into the freezer.
Quick Freezer indicator will remain
lit when the Quick Freezer function is
enabled. To cancel this
function press Quick Freezer button
again. Quick Freezer indicator will turn
off and return to its normal settings.
If you do not cancel it, Quick Fridge
will cancel itself automatically
after 25 hours or when the freezer
compartment reaches to the required
temperature. This function is not
recalled when power restores after a
power failure.


Specyfikacje produktu

Marka: Beko
Kategoria: ZAMRAŻARKI
Model: RFNE200E32WN

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Beko RFNE200E32WN, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje ZAMRAŻARKI Beko

Beko

Beko FRFP 1685 Instrukcja

13 Października 2024
Beko

Beko FXS5043W Instrukcja

8 Października 2024
Beko

Beko HSA40520F Instrukcja

9 Sierpnia 2024
Beko

Beko RFNE270T31W Instrukcja

7 Sierpnia 2024
Beko

Beko RFNK290E23X Instrukcja

7 Sierpnia 2024
Beko

Beko FXS 5043 Instrukcja

7 Sierpnia 2024
Beko

Beko HSA 40541 Instrukcja

6 Sierpnia 2024

Instrukcje ZAMRAŻARKI

Najnowsze instrukcje dla ZAMRAŻARKI

Amana

Amana AUF150KW Instrukcja

15 Stycznia 2025
WLA

WLA VF5000 Instrukcja

14 Stycznia 2025
Summit

Summit SCFM92 Instrukcja

14 Stycznia 2025
Balay

Balay 3GFF563XE Instrukcja

14 Stycznia 2025
Zanker

Zanker ZKG120 Instrukcja

14 Stycznia 2025
Benavent

Benavent CBHM150 Instrukcja

13 Stycznia 2025
Summit

Summit FS21L Instrukcja

13 Stycznia 2025
Freggia

Freggia LC44 Instrukcja

13 Stycznia 2025