Instrukcja obsługi Beko BLSF3682


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Beko BLSF3682 (12 stron) w kategorii Chłodzenie zamrożenia. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
EN /
User Manual
BL 20 - BL 21 - BLSF3682
Fully Integrated Larder
48 3898 0003 / AN
1
Congratulations on your choice of a quality Appliance which has been designed to give you service
for many years.
WARNING !
IMPORTANT !
DO NOT connect the appliance to the electricity supply until all packing and transit protectors have
been removed.
• Leave to stand for at least 4 hours before switching on to allow compressor oil to settle if
transported horizontally.
• If you are discarding an old refrigerator with a lock or latch tted to the door, ensure that it is
left in a safe condition to prevent the entrapment of children.
This fridge must only be used for its intended purpose i.e the storing of edible foodstuff.
• Do not dispose of the appliance on a re. At Beko, the care and protection of our environment is an
ongoing commitment. This appliance which is among the latest range introduced is
particularly environmentally friendly. Your appliance contains non CFC / HFC natural substances
in the cooling system (Called R600a) and in the insulation(Called cyclopentane) which are
potentially ammable if exposed to re. Therefore, take care not to damage, the cooling
circuit / pipes of the appliance in transportation and in use. In case of a damage do not expose
the appliance to re, potential ignition source and immediately ventilate the room where
the appliance is situated.
We suggest you contact your local authority for disposal information and facilities available.
We do not recommend use of this appliance in an unheated, cold room. (E.g.: garage,
conservatory, annex, shed, out-house etc.) See item 6 on Page 5.
To obtain the best possible performance and trouble free operation from your appliance it is
very important to carefully read these instructions.
• On delivery, check to make sure that the product is not damaged and that all the parts and
accessories are in perfect condition.
• Ensure that the plug remains readily accessible. Do not use a multiple adapter bar or extension cable.
• Failure to observe these instructions may invalidate your right to free service during the guarantee
period.
WARNING- Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.
WARNING- Do not use mechanical devices or other means to accelerate the defrosting process, other
than those recommended by the manufacturer.
WARNING- Do not damage the refrigerant circuit.
WARNING- Do not use electrical appliances inside the food storage compartments of the appliance,
unless they are of the type recommended by the manufacturer.
We suggest you keep these instructions in a safe place
for easy reference.
2
CONTENTS
SAFETY FIRST / ELECTRICAL REQUIREMENTS
TRANSPORTATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
REPOSITIONING THE DOOR
SUGGESTED ARRANGEMENT OF FOOD IN THE LARDER FRIDGE
TEMPERATURE CONTROL AND ADJUSTMENT
STARTING
DEFROSTING
CLEANING AND CARE
REPLACING THE INTERIOR LIGHT BULB
DO'S AND DON'TS
PROBLEM SOLVING/TROUBLE SHOOTING
INSTALLATION INSTRUCTIONS - DETAILED STEP BY STEP
GUARANTEE DETAILS
HOW TO OBTAIN SERVICE
3
4
5
6-7
11
12
13
13
14-19
PAGE
8-9
9
10
10
20
21
ELECTRICAL REQUIREMENTS
Before you insert the plug into the wall socket make sure that the voltage and the
frequency shown in the rating plate inside the appliance corresponds to your
electricity supply. Rating label is on the left hand side of fridge liner.
We recommend that this appliance is connected to the mains supply via a
suitable switched and fused socket in a readily accessible position.
Should the mains lead of the appliance become damaged or should it need
replacing at any time, it must be replaced by a special purpose made mains lead
which can only be obtained from a Beko Authorised Service Agent.
WARNING! THIS APPLIANCE MUST BE EARTHED
If the tted moulded plug is not suitable for your socket, then the plug should be
cut off and an appropriate plug tted. Destroy the old plug which is cut off as a
plug with bared cord could cause a shock hazard if inserted into a socket
elsewhere in the house.
The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse
need to be replaced an ASTABEAB approved BS 1362 fuse of the same rating must
be used. Do not forget to ret the fuse cover. In the event of losing the fuse cover
the plug must not be used until a replacement fuse cover has been tted. Colour
of the replacement fuse cover must be the same colour as that visible on the pin
face of the plug. Fuse covers can be obtained from a Beko authorised service
agent.
IMPORTANT! FITTING A DIFFERENT PLUG
As the colours of the wires in the
mains lead of this appliance may
not correspond with the coloured
markings identifying the terminals
in your plug proceed as follows:
(See diagram).
1. Connect the green-yellow or
green (Earth) wire to the terminal
in the plug marked 'E' or with
the symbol or coloured
green and yellow or green.
2. Connect the blue (Neutral) wire
to the terminal in the plug
marked 'N' or coloured black.
3. Connect the brown (Live) wire to
the terminal in the plug marked 'L'
or coloured red.
With alternative plugs a 13 A fuse must be tted either in the plug or adaptor or
in the main fuse box.
If in doubt contact a qualied electrician. 3
FITTED WITH
BS 1362 13A FUSE ALWAYS
FIT BS 1362 REPLACEMENT
CARTRIDGE FUSE
GREEN &
YELLOW
OR
GREEN
N
BLUE
OR
BLACK
L
BROWN
OR
RED
22mm.
6mm.
6mm.
6mm. 32mm.
12mm.
FUSE
CORD GRIP


Specyfikacje produktu

Marka: Beko
Kategoria: Chłodzenie zamrożenia
Model: BLSF3682

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Beko BLSF3682, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Chłodzenie zamrożenia Beko

Instrukcje Chłodzenie zamrożenia

Najnowsze instrukcje dla Chłodzenie zamrożenia

Koenic

Koenic KFZ 531 E NF Instrukcja

7 Października 2024
Respekta

Respekta KS1220 Instrukcja

6 Października 2024
Marynen

Marynen cm 2684 dt Instrukcja

5 Października 2024
Junker

Junker JC30KB30 Instrukcja

5 Października 2024
Marynen

Marynen CM 1700 TC Instrukcja

5 Października 2024
Marynen

Marynen cm 1894 t Instrukcja

5 Października 2024
Marynen

Marynen cm 2826 dt Instrukcja

5 Października 2024
Junker

Junker JC20GB20 Instrukcja

5 Października 2024
Marynen

Marynen CM 1040T Instrukcja

5 Października 2024
Marynen

Marynen CM 2890F Instrukcja

5 Października 2024