Instrukcja obsługi BeamZ WH-248

BeamZ Maszyna efektów WH-248

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BeamZ WH-248 (8 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

V2.2

Ref. No.: 150.672

WH-248 LED WASH

24X 8W QUAD DMX

MANUAL

- 2 -

Thank you for purchasing one of our products. Before you use this product please read these instructions

carefully to enjoy optimal performance and a longer service life.

UNPACKING INSPECTIONS

Unpacking instructions

 Please unpack the carton and check the goods carefully when you receive it , if you discover any

packing damage, shortage or quality problems, please notify the shipper and reject the goods.

 Before using this product, please read the instructions carefully and store them in a safe place for

future reference.

SAFETY INSTRUCTIONS

 Always connect this product to a grounded circuit to avoid the risk of electrocution.

 Never put tiny metal objects such as a screwdriver, iron wire, etc. into this product in case of a short

circuit .

 Please make sure that the voltage of the outlet to which you are connecting this product is within

the range stated on the decal or rear panel of the product.

 Avoid physical damage to the product during transportation. Never carry this product from the

power cord or any moving part . Always use the hanging / mounting bracket or the handles.

 This product is for indoor use only. To avoid risk of re or shock, do not expose this product to rain

or moisture.

 Never pull or tug on the cord and change it for another one, stop using it when it is damaged or

becomes hot .

 Stop using the product once there are sparks when connecting it to the power socket.

 Do not operate this product with wet hands and never place it near water or any other liquids.

 Make sure there are no ammable materials close to the unit while operating. Always install it in a

location with adequate ventilation.

 When the original lightning source is damaged, do not replace it with a lightning source which has

dierent specications and rating s.

 Always disconnect this product from the power source before replacing the light source or the fuse.

 The maximum ambient temperature is 40°C(104°F).

 Never clean the unit with water, thinner or any other dissolving agent .

 Stop using the product in case of a serious operating problem and send it to our maintenance agent

immediately. Never get this product repaired by non-professional workers.

 Avoid direct eye exposure to the light source while this product is on.

 Never clean the xture by water, thinner or other dissolved agent .

 Stop using the product in case of a serious operating problem and send it to our maintenance agent

immediately. Never repair by non-professional workers .

 Avoid direct eye exposure to the light source while the product is on.

- 3 -

SPECIFICATION

Tilt movement:

220° manually

No. of LEDs:

24x 8W Quad LEDs

No. of patterns:

DMX channels:

1-4-8

IP Rating ”:

IP65

Power Supply:

220-240Vac / 50Hz

Consumption:

230W

MAINTENANCE

The unit should be cleaned periodically to ensure the optimal performance, smudginess can decrease the

life of the light source and the output of light is aected by the dust which can make the machine overheat.

It is advised to perform maintenance 2 times a month. Be sure to disconnect the unit from the power socket

before cleaning.

Do not clean until the unit recovers a normal temperature, use the lens tissue or soft cotton cloth with

alcohol and wipe gently.

The cleaning frequency depends on the environment in which this unit operates, damp, smoky or dirty

surroundings can cause greater accumulation of dirt on the optics. Never rub or press strongly on the panel.

FUNCTIONS INTRODUCTIONS

Main Functions

 1, 4 or 8 DMX channels.

 DMX, auto and master/slave mode .

 24x 8W Quad LEDs

 10 Built-in programs

 Electronic dimming 0 100% –

Specyfikacje produktu

Marka:	BeamZ
Kategoria:	Maszyna efektów
Model:	WH-248

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z BeamZ WH-248, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna efektów BeamZ

BeamZ PS6W 151.262 Instrukcja

14 Stycznia 2025

BeamZ S553L Instrukcja

5 Stycznia 2025

BeamZ BLAZE3500 Instrukcja

8 Października 2024

BeamZ SparkleWall 151.201 Instrukcja

8 Października 2024

BeamZ BLAZE1200 Instrukcja

7 Października 2024

BeamZ BLAZE800 Instrukcja

7 Października 2024

BeamZ ICE700 Instrukcja

7 Października 2024

BeamZ BLAZE1800 Instrukcja

7 Października 2024

BeamZ LUCID 1.2 150.462 Instrukcja

2 Października 2024

BeamZ Mini 153.325 Instrukcja

30 Września 2024

Instrukcje Maszyna efektów

Najnowsze instrukcje dla Maszyna efektów

Audibax Smoke 500 Instrukcja

5 Stycznia 2025

Audibax Haze 1200 Instrukcja

5 Stycznia 2025

Audibax Smoke 1500 Instrukcja

5 Stycznia 2025

Audibax VOLCANO 1500 RGBW Instrukcja

5 Stycznia 2025

Audibax Spark 600 Instrukcja

5 Stycznia 2025

Audibax Smoke 700 LED Instrukcja

5 Stycznia 2025

Audibax Smoke 1200 Instrukcja

5 Stycznia 2025

Audibax Geyser 2000 Instrukcja

5 Stycznia 2025

Westinghouse W24V5AH Instrukcja

3 Stycznia 2025

Westinghouse WSnow11S Instrukcja

3 Stycznia 2025