Instrukcja obsługi BeamZ LS-RB11 152.879

BeamZ Maszyna efektów LS-RB11 152.879

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BeamZ LS-RB11 152.879 (29 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/29
CLASS 3B
LASER EFFECT
152.879
Instruction Manual
Gebruiksaanwijzing
Gebrauchsanleitung
This manual contains important laser system safety and operation information. Read
and understand all instructions prior to powering on laser unit the first time, to avoid
laser eye injury and to avoid breaking the law. Keep this manual in a safe place for
future reference.
WARNING DATA
Lasers can be hazardous and have unique safety considerations. Permanent eye
injury and blindness is possible if lasers are used incorrectly. Pay close attention to
each safety REMARK and WARNING statement in the user manual. Read all
instructions carefully BEFORE operating this device.
Attention!
Important!
Caution!
Laser!
Recycle
Indoor
Disposal
Location
Indicates a skill or other useful information for special situations.
Indicates important information to protect personnel from laser
incident or injury.
Prevent damage or injury from incorrect operation.
Laser safety warming labels.
To protect the environment, recycle packing material wherever
possible.
The projector is for indoor use only, IP20. Use only in dry
locations. Keep this device away from rain and moisture,
excessive heat, humidity and dust. Do not allow contact with
water or other fluids.
Don’t throw this product away just as general trash, please
dispose of this product following the abandon electronic product
regulations in your area.
The projector must be installed in a location with adequate
ventilation, at least 50cm (20 inches) from adjacent surfaces. Be
sure that no ventilation slots are blocked.
LASER SAFETY WARNINGS
Caution
• Avoid direct eye contact with laser light. Never intentionally expose
your eyes or others to direct laser light..
• This laser product can potentially cause instant eye injury or blindness
if laser light directly strikes the eyes.
• It is illegal and dangerous to shine this laser into audience areas, where
the audience or other personnel could get direct laser beams or bright
reflections into their eyes.
• It is an offense to shine any laser at aircraft.
• There are no user serviceable parts inside the unit. Do not open the
housing or attempt any repairs yourself. In the unlikely event your unit
may require service, please contact your dealer. .
• Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
NON-INTERLOCKED HOUSING WARNING
This unit contains high power laser devices internally. Do not open the laser housing,
due to potential exposure to unsafe levels of laser radiation. The laser power levels
accessible if the unit is opened can cause instant blindness, skin burns and fires.
LASER SAFETY AND OPERATING INSTRUCTIONS
STOP AND READ ALL LASER SAFETY DATA
Laser Light is different from any other light source with which you may be familiar. The
light from this product can potentially cause eye injury if not set up and used properly.
Laser light is thousands of times more concentrated than light from any other kind of
light source. This concentration of light power can cause instant eye injuries,
primarily by burning the retina (the light sensitive portion at the back of the eye).
Even if you cannot feel “heat” from a laser beam, it can still potentially injure or blind
you or your audience. Even very small amounts of laser light are potentially hazardous
even at long distances. Laser eye injuries can happen quicker than you can blink.
It is incorrect to think that because these laser entertainment products split the laser
into hundreds of beams or laser beam is scanned out in high speed, that an individual
laser beam is safe for eye exposure. This laser product uses dozens of mini Watts of
laser power (Class 3B levels internally). Many of the individual beams are potentially
Potential laser injury hazard exists with this product! Read these instructions carefully,
which includes important information about installation, safe use and service!

Specyfikacje produktu

Marka: BeamZ
Kategoria: Maszyna efektów
Model: LS-RB11 152.879

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z BeamZ LS-RB11 152.879, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna efektów BeamZ

BeamZ

BeamZ BLAZE3500 Instrukcja

8 Października 2024
BeamZ

BeamZ SparkleWall 151.201 Instrukcja

8 Października 2024
BeamZ

BeamZ BLAZE1200 Instrukcja

7 Października 2024
BeamZ

BeamZ BLAZE800 Instrukcja

7 Października 2024
BeamZ

BeamZ ICE700 Instrukcja

7 Października 2024
BeamZ

BeamZ BLAZE1800 Instrukcja

7 Października 2024
BeamZ

BeamZ LUCID 1.2 150.462 Instrukcja

2 Października 2024
BeamZ

BeamZ Mini 153.325 Instrukcja

30 Września 2024
BeamZ

BeamZ BPP200 151.231 Instrukcja

29 Września 2024
BeamZ

BeamZ Apollo Instrukcja

27 Września 2024

Instrukcje Maszyna efektów

Najnowsze instrukcje dla Maszyna efektów

Velleman

Velleman vdl660rl Instrukcja

10 Października 2024
Valcom

Valcom V-5580041A Instrukcja

8 Października 2024
Magmatic

Magmatic Magma Fog 1500IP-II Instrukcja

8 Października 2024
Magmatic

Magmatic PMDMX1 Instrukcja

8 Października 2024
Magmatic

Magmatic CRISP Instrukcja

8 Października 2024
Magmatic

Magmatic CRISP MAX Instrukcja

8 Października 2024
Magmatic

Magmatic SIDEWINDER Instrukcja

8 Października 2024
Magmatic

Magmatic JAVELIN Instrukcja

8 Października 2024
Magmatic

Magmatic MAGMA FOG 1500 IP Instrukcja

8 Października 2024
Antari

Antari F-7X Instrukcja

8 Października 2024