Instrukcja obsługi BeamZ BX30

BeamZ Niesklasyfikowane BX30

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BeamZ BX30 (32 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/32

BX3 3x10 4-in-1 0PAR W

Ref. nr.: 150.735

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.0

ENGLISH

Congratulations to the purchase of this Beamz product. Please read this manual thoroughly prior to using the product in order to

benefit fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions

to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When the unit is switched on for the first time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the

product. This may cause electrical shock and

malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet,

always pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualified technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the product on. Contact your dealer.

Do NOT connect the product to a rheostat or dimmer.

- To avoid fire and shock hazard, do not expose the

product to rain and moisture.

- All repairs should be carried out by a qualified technician

only.

- Connect the product to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the product will not be used

for a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

- If the product has not been used for a longer period of

time, condensation may occur. Let the unit reach room

temperature before you switch it on.

- Never use the product in humid rooms or outdoors.

- During operation, the housing becomes very hot. Do not

touch it during operation and immediately after.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Secure the product with an extra safety chain if the unit is

ceiling mount. Use a truss system with clamps. Make

sure nobody stands in the mounting area. Mount the

effect at least 50cm away from inflammable material and

leave at least 1 meter space on every side to ensure

sufficient cooling.

- rThis p oduct contains high intensity LEDs. Do not look

into the LED light to prevent damage to your eyes.

- Do not repeatedly switch the product on and off. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Only operate the product with clean hands.

- Do not force the controls.

- If the product has fallen, always have it checked by a

qualified technician before you switch the product on

again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the product with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product off prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- -The mains voltage is 220 240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this product.

- Keep the original packing material so that you can

transport the product in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic

attacks should be aware of the effects that this light effect may have on them.

The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate

and their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.

Specifications can be changed without prior notice.

prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. cannot be held responsible for personal injuries caused by a disrespect of the safety Beamz

recommendations and warnings. This is also applicable to all damages in whatever form.

Specyfikacje produktu

Marka:	BeamZ
Kategoria:	Niesklasyfikowane
Model:	BX30
Kolor produktu:	Biały
Rodzaj zasilania:	PoE
Waga produktu:	985 g
Technologia łączności:	Przewodowa
Certyfikaty:	CE, LVD, FCC Class A, VCCI, C-Tick, UL
Obsługiwane systemy operacyjne Windows:	Tak
Obsługiwane typy kart pamięci:	SD,SDHC,SDXC
Przeznaczenie:	Zewnętrzna
Wielkość pamięci flash:	128 MB
Pojemność pamięci wewnętrznej:	256 MB
Standardy komunikacyjne:	IEEE 802.3at
Ilość portów Ethernet LAN (RJ-45):	1
Obsługa PoE:	Tak
Układ:	Pocisk
Możliwość przybliżenia:	Tak
Tryb nocny:	Tak
Wi-Fi:	Nie
Obsługiwane formaty audio:	G.711
Obsługiwane formaty plików wideo:	H.264,MPEG
Przewodowa sieć LAN:	Tak
Zintegrowany czytnik kart:	Tak
Diody LED:	Tak
Instrukcja szybkiej instalacji:	Tak
Model:	Kamera bezpieczeństwa IP
Technologia okablowania:	10/100Base-T(X)
Maks. rozdzielczość:	1280 x 800 px
Stopień ochrony IP:	IP66
Typ mocowania:	Ściana
System dźwięku:	2-drożny
Stosunek sygnału do szumu:	61 dB
Obsługiwane protokoły sieciowe:	IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1X
Długość ogniskowa:	2.8 - 12 mm
Cyfrowe zbliżenie:	48 x
Redukcja hałasu:	Tak
Typ przetwornika obrazu:	CMOS
Suma megapikseli:	1 MP
Regulowanie jakości:	Brightness,Contrast,Saturation,Sharpness
Tryb dzienny / nocny:	Tak
Produkt odporny na warunki atmosferyczne:	Tak
Uchwyty mocowania dołączone:	Tak
Typ diody LED:	Podczerwień
Min. Oświetlenie:	0.001 lx
Czujnik ruchu:	Tak
Średnica:	82 mm
Długość produktu:	283 mm
Wbudowany HDD:	Nie
PTZ:	Tak
Kąt widzenia obiektywu, w poziomie:	87 °
Kąt widzenia obiektywu w pionie:	54 °
Kąt widzenia soczewki, przekątna:	110 °
Wielkość czujnika CCD:	1/3 "
Skanowanie progresywne:	Tak
Ilość klatek:	30 fps
Szybkość migawki:	1/5 - 1/32000 s
Inkrypcja HTTS:	Tak
Wide Dynamic Range (WDR):	Tak
Liczba użytkowników:	10 użyt.
Nakładanie znacznika czasowego:	Tak
Nakładanie tekstu:	Tak
Obracanie obrazu i odbicie lustrzane:	Tak
Odległość widzenia nocnego (Night Vision):	30 m
Ilość diod oświetlenia:	6
Maska prywatności:	Tak
Płyta ze sterownikami:	Tak
Zużycie prądu (przesył prądu przez Ethernet (PoE)):	10 W
Tęczówka:	Tak