Instrukcja obsługi Bauknecht WM Steam 8 100

Bauknecht pralka WM Steam 8 100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bauknecht WM Steam 8 100 (4 stron) w kategorii pralka. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Quick Guide

THANK YOU FOR PURCHASING A PRODUCTBAUKNECHT .

To receive more comprehensive assistance, register the

appliance on

www.bauknecht.eu/register

Before using the appliance carefully read the Health and Safety guide.

Before using the machine, it is imperative that the transport bolts are removed. For more

detailed instructions on how to remove them, see the Installation Guide.

CONTROL PANEL

WASH CYCLE TABLE

For all testing institutes:

2) Long cotton cycle: set cycle 7 at a temperature of 40°C.

3) Long synthetics cycle: set cycle 8 at a temperature of 40°C.

* By selecting the cycle and excluding the spin cycle, the washing machine will drain only.

** The duration of the wash cycles can be checked on the display.

The cycle duration indicated on the display or instruction manual is an estimate based on

standard conditions. The actual duration may vary in relation to several factors, such as

the temperature and pressure of the incoming water, ambient temperature, amount of

detergent, load quantity and type, load balancing and any additional options selected.

1) Test wash cycle in compliance with regulation 1061/2010:

This cycle is designed for normally soiled cotton loads and is the most ecient in terms of

both electricity and water consumption; it should be used for garments washable at 60°C or

at 40°C. The actual washing temperature may dier from the indicated value.

PRODUCT DESCRIPTION

1. Top

2. Detergent dispenser drawer

3. Control panel

4. Handle

5. Porthole door

6. Drain pump (behind the plinth)

7. Plinth (removable)

8. Adjustable feet (2)

1. ON/OFF button

2. OPTION buttons and indicator lights

3. CLEANING ACTION button

4. CLEANING ACTION indicator lights

5. START/PAUSE button and indicator light

6. CHILD LOCK button

7. DELAY START button

8. SPIN button

9. TEMPERATURE button

10. WASH CYCLE SELECTOR KNOB

DISPLAY

567

Maximum load 8 kg

Power input in o mode 0.5 W / in left-on mode 8 W

Detergents and

Additives

Recommended

detergent

Residual

dampness %

Energy con-

sumption kWh

Total water l

Option Steam

Wash cycle Temperature Maximum

spin

(r.p.m.)

Maximum

load (kg)

Duration

(minutes)

Wash Fabric

softener Powder Liquid

Default Range 1 2

1 Anti-Stain 100 40 °C - 40 °C 1400 8,0 **    – – – – 

2 Anti-Stain 45‘ 40 °C - 40 °C 1200 4,5 **   –– – – –

3 Whites 60 °C - 90 °C 1400 8,0 **    – – – – 

4 Bed&Bath 60 °C - 60 °C 1400 8,0 **    – – – – 

5 Eco cotton

60°/40°

(1) 60 °C 60° C 1400 8,0 225     53 0,97 55 –

40°C 1400 8,0 220     53 1,03 92 –

6 Mixed 40 °C - 40 °C 1000 4,5 **   –– – – –

7 Cotton (2) 40 °C - 60 °C 1400 8,0 220    – 53 1,03 92 –

8 Synthetics (3) 40 °C - 60 °C 1200 4,5 200    – 32 0,80 78 

9 Colours 40 °C - 40 °C 1400 8,0 **    – – – – –

10 Rapid 30' 30 °C - 30 °C 800 4,5 30   –71 0,19 44 –

11 Wool 40 °C - 40 °C 800 2 **   –– – – –

12 Darks 30 °C - 30 °C 800 4,5 **   –– – – –

13 Ultra-delicate 30 °C - 30 °C -- 1,0 **   –– – – –

14 Duvets 30 °C - 30 °C 1000 3,5 **   –– – – –

Rinse – – 1400 8,0 ** – – – – – – –

Spin & Drain * – – 1400 8,0 ** – – – – – – – –

 Required dosage Optional dosage

DETERGENT DISPENSER DRAWER

Compartment *:

Do not insert detergent in this compartment.

Compartment 1: Washing detergent (powder

or liquid)

If liquid detergent is used, the removable plastic

partition (supplied) should be used for proper A

dosage.

If powder detergent is used, place the partition

into slot .B

Compartment 2: Additives (fabric softeners, etc.)

The fabric softener must not exceed the “MAX” level.

! Follow the instructions given on the detergent packaging.

! Do not use hand washing detergents; they create too much foam.

WASH CYCLES

Follow the instructions on the symbols of the garment’s wash

care label. The value indicated in the symbol is the maximum

recommended temperature for washing the garment.

Anti-Stain 100

This cycle is suitable to heavily-soiled garments with resistant colours. It

ensures a washing class that is higher than the standard class (A class).

When running the programme, do not mix garments of dierent colours.

We recommend the use of powder detergent. Pre-treatment with special

additives is recommended if there are obstinate stains

Anti-Stain 45’

This cycle is ideal for washing daily stains in 45’. It is ideal for mixed fabrics

and coloured garments.

Whites

For heavily soiled whites and resistant colours.

Bed&Bath

For washing home linen in a single cycle. It optimises the use of fabric

softener and allows for saving time and electricity. We recommend the

use of powder detergent.

Eco cotton

Suitable for washing moderately soiled cotton garments. At 40°C and

60°C it is the standard cycle for washing cotton garments, and is the most

ecient in terms of combined water and electricity consumption.

Mixed

To wash mixed and coloured items together.

Cotton

Suitable for washing towels, underwear, table cloths, etc. made of

resistant linen and cotton that are moderately to heavily soiled.

Synthetics

Suitable for washing moderately soiled garments made of synthetic bres

(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.

Colours

For washing coloured cotton garments. This programme is optimised to

keep colours bright even after repeated washing.

Rapid 30’

For washing lightly soiled garments in a short time. Not suitable for wool,

silk and garments to be washed by hand.

Wool - Woolmark Apparel Care - Green:

The Wool wash cycle of this machine has been approved by The

Woolmark Company for the washing of wool garments

labelled as “hand wash” provided that the products are

washed according to the instructions on the garment

label and those issued by the manufacturer of this

washing machine (M1127). The Woolmark logo is a

Certication mark in many countries.

Darks

For washing dark-coloured garments. The wash cycle is designed to

preserve dark colours over time.

We recommend using a liquid detergent for best results, preferably when

washing dark-coloured garments.

Ultra-delicate

For washing very delicate garments. It is advisable to turn the garments

inside out before washing them. For best results, use liquid detergent on

delicate garments.

Duvets

To wash double or single duvets (weighing under 3,5 kg), cushions or

down jackets. Duvets should be loaded into the drum with their edges

folded inwards and no more than ¾ of the total drum volume should be

used up. For best results, it is advisable to use liquid detergent to be

poured into the detergent drawer.

Rinse

Designed for rinsing and spinning.

Spin & Drain

Designed for spinning and draining the water.

DISPLAY

The display is useful when programming the washing machine and

provides plenty of information.

Section displays the duration of the various available wash cycles and, A

once the cycle starts, the time remaining to the latter’s end (the display

will show the maximum duration of the selected cycle which may

decrease after a few minutes, as the actual duration varies in relation to

the laundry load and the chosen settings); if the DELAY START function

was set, the display will show the time remaining to the start of the

selected wash cycle.

Pressing the corresponding button allows for viewing the maximum spin

speed and temperature values attained by the machine during the set

wash cycle, or the most recently selected values, if these are compatible

with the chosen wash cycle.

The “washing phases” relative to the selected cycle and the “washing

phase” of the running cycle appear in section :B

Wash

Steam

Rinse

Spin/Drain

Section displays – starting from the left – the icons corresponding to C

“temperature”, “spin” and “delay start”.

The “temperature” bars indicate the maximum temperature level

that can be selected for the chosen cycle.

The “spin” bars indicate the maximum spin speed that can be

selected for the chosen cycle.

When lit, the “delay” symbol indicates that the chosen “Delay start”

value appears on the display.

Locked door indicator

When lit, the symbol indicates that the door is locked. To prevent any

damage, wait until the symbol turns o before opening the door.

To open the door while a cycle is in progress, press the START/PAUSE

button ; if the symbol is o, the door can be opened.

FIRSTTIME USE

Once the appliance has been installed, and before it is used for the rst

time, run a wash cycle with detergent and no laundry, by setting the

“Auto-Clean” cycle.

DAILY USE

Prepare the laundry by following the suggestions appearing under the

“TIPS AND SUGGESTIONS” section.

- Press the ON/OFF button ; the indicator light relative to START/PAUSE

will ash slowly.

- Open the door. Load the laundry while making sure not to exceed the

maximum load quantity indicated in the wash cycle table.

- Pull out the detergent dispenser drawer and pour the detergent into the

relevant compartments, as described in the “DETERGENT DISPENSER

DRAWER” section.

- Close the door.

- The machine automatically displays the maximum temperature and spin

speed values for the selected cycle, or the most recently used settings if

they are compatible with the selected cycle. Pressing the button

gradually reduces the temperature down to the cold wash “OFF” setting.

Pressing the button gradually reduces the spin speed until it is

completely excluded (“OFF” setting). Pressing the buttons further restores

the maximum allowed values for the selected cycle.

- Select the desired options.

- Press the START/PAUSE button to start the wash cycle; the relative

indicator light will light up steady and the door will lock ( symbol on).

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again; the

indicator light will ash. To start the wash cycle from the point at which it

was interrupted, press the START/PAUSE button again.

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the symbol turns on to signal that the door cannot

be opened. While a wash cycle is running, the door remains locked. To

open the door while a cycle is under way, for example, to add or remove

garments, press the START/PAUSE button to pause the cycle; the

indicator light will ash. If the symbol is not lit, the door may be

opened. Press the START/PAUSE button again to continue the cycle.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine

using the START/PAUSE button (the relative indicator light will ash),

then select the desired cycle and press the START/PAUSE button

again.

! To cancel a cycle that has already begun, press and hold the ON/OFF

button. The cycle will be stopped and the machine will switch o.

AT THE END OF THE WASH CYCLE

This will be indicated by the word “END” on the display; when the

symbol switches o, the door may be opened. Open the door, unload the

laundry and switch o the machine. If you do not press ON/OFF

button, the washing machine will switch o automatically after about a

half of an hour.

OPTIONS

- If the selected option is not compatible with the set wash cycle, the

indicator light will ash and the option will not be activated.

- If the selected option is not compatible with another option that has

been selected previously, the indicator light corresponding to the rst

function selected will ash and only the second option will be

activated; the indicator light corresponding to the activated option will

be illuminated.

Steam

This option enhances washing performance by generating steam during

the wash cycle that eliminates any bacteria from bres while treating

them at the same time. Moreover, the addition of steam facilitates the

subsequent ironing of clothing.

! The steam generated during washing machine operation may cause the

porthole door to become hazy.

Extra Rinse

Selecting this option allows for enhancing rinsing eciency and fully

removing the detergent. It is particularly useful for sensitive skin.

Delay start

To set a delayed start for the selected cycle, press the corresponding

button repeatedly until the desired delay period is reached. When this

option has been activated, the symbol lights up on the display. To

remove the delayed start setting, press the button until “OFF” appears on

the display.

Temperature

Each wash cycle has a pre-dened temperature. To modify the

temperature, press the button. The value will appear on the display.

Spin

Each wash cycle has a pre-dened spin speed. To modify the spin speed,

press the button. The value will appear on the display.

Cleaning Action

Option makes it possible to optimise washing based on the level of

soil in the fabrics and on desired wash cycle intensity.

For heavily-soiled garments press button until the “ ” level Intensiv

is reached. This level ensures a high-performance wash due to a larger

quantity of water used in the initial phase of the cycle and due to

increased drum rotation. It is useful when removing the most stubborn

stains.

For lightly-soiled garments or a more delicate treatment of the fabrics,

press button until the “ ” level is reached. The cycle will reduce Sanft

drum rotation to ensure washing results that are perfect for delicate

garments.

CHILD LOCK

To activate the control panel lock, press and hold the button for

approximately 2 seconds. When the symbol is lit, the control panel is

locked (except for the ON/OFF button). This will prevent accidental

modications to wash cycles, especially when children are at home. To

deactivate the control panel lock, press and hold the button for

approximately 2 seconds.

TIPS AND SUGGESTIONS

Divide the laundry according to:

Type of fabric (cotton, mixed bres, synthetics, wool, garments to be

hand-washed). Colour (separate coloured garments from whites, wash

new coloured garments separately). Delicates (small garments – such as

nylon stockings – and items with hooks – such as bras: insert them in a

fabric bag).

Empty the pockets:

Objects such as coins or lighters can damage the washing machine and

the drum. Check all buttons.

CARE AND MAINTENANCE

Before performing cleaning and maintenance, switch the washing machine

o and disconnect it from the mains power. Do not use ammable liquids to

clean the washing machine.

Cutting o the water and electricity supplies

Close the water tap after every wash. This will limit wear on the hydraulic

system inside the washing machine and help to prevent leaks.

Unplug the washing machine when cleaning it and during all

maintenance work.

Cleaning the washing machine

The outer parts and rubber components of the appliance can be cleaned

using a soft cloth soaked in lukewarm soapy water. Do not use solvents or

abrasives.

The washing machine has a “Auto-Cleaning” cycle for its internal parts; it

must be run without any load in the drum.

To optimise this cycle, it is possible to use either detergent (10% of the

quantity specied for lightly soiled garments) or special additives to clean

the washing machine. We recommend running a cleaning cycle every 40

wash cycles.

To start the cycle press buttons and simultaneously for 5

seconds.

The cycle will start automatically and will run for about 70 minutes. To

stop the cycle, press the START/PAUSE button.

Cleaning the detergent dispenser drawer

Remove the dispenser drawer by lifting and pulling it outwards. Wash it

under running water; this procedure should be eected regularly.

Caring for the door and drum

Always leave the porthole door ajar in order to prevent unpleasant odours

from forming.

Cleaning the pump

The washing machine is tted with a self-cleaning pump that does not

require any maintenance. Small items (such as coins or buttons) may

sometimes fall into the protective pre-chamber situated at the base of the

pump.

! Make sure that the wash cycle has ended and unplug the appliance.

To access the pre-chamber:

1. remove the covering panel on the front side of the machine by

inserting a screwdriver in the centre and sides of the panel and using it as

a lever;

2. loosen the drainage pump cover by turning it anti-clockwise: it is

normal for some water to leak out;

3. clean the inside thoroughly;

4. screw the cover back on;

5. put the panel back in place, making sure the hooks slot in place before

pushing the panel onto the appliance.

Checking the water inlet hose

Check the water inlet hose at least once a year. If it is cracked or broken, it

must be replaced: during wash cycles, the high pressure of the water

could suddenly split the hose open.

! Never use hoses that have already been used.

ACCESSORIES

Contact our Technical Assistance Service to check whether the following

accessories are available for this washing machine model.

Stacking kit

With this accessory you can secure the tumble dryer to the upper part of

your washing machine to save space and facilitate loading and unloading

of the tumble dryer.

TRANSPORT AND HANDLING

Do not lift the washing machine by gripping it from the upper section.

Unplug the appliance and close the water tap. Check that the door and

detergent dispenser drawer are tightly closed. Detach the lling hose

from the water tap then detach the drain hose. Empty all the water

remaining in the hoses and secure the latter so that they do not get

damaged during transport. Apply the transport bolts back on. Repeat, in

reverse order, the transport bolt removal procedure described in the

“Installation instructions”.

Specyfikacje produktu

Marka:	Bauknecht
Kategoria:	pralka
Model:	WM Steam 8 100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bauknecht WM Steam 8 100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje pralka Bauknecht

Bauknecht WM Class 7A Instrukcja

9 Października 2024

Bauknecht WM Sense 824 PS Instrukcja

9 Października 2024

Bauknecht B7X 89 SILENCE DE Instrukcja

8 Października 2024

Bauknecht WA Plus 726 BW Instrukcja

7 Października 2024

Bauknecht B8 W046WB DE Instrukcja

6 Października 2024

Bauknecht B8 W046WB BE Instrukcja

6 Października 2024

Bauknecht NBM22 863E WA EU N Instrukcja

6 Października 2024

Bauknecht NM22L 7469 WSE BE Instrukcja

5 Października 2024

Bauknecht WM Sense 8A Instrukcja

5 Października 2024

Bauknecht B7 99 SILENCE DE Instrukcja

4 Października 2024

Instrukcje pralka

Najnowsze instrukcje dla pralka

Candy CS 15102D3-80 Instrukcja

15 Października 2024

GE GSD3715FAA Instrukcja

15 Października 2024

Siemens iQ700 WI14W540EU Instrukcja

15 Października 2024

LG WTP22BK Instrukcja

15 Października 2024

Freggia WTIE148 Instrukcja

15 Października 2024

Freggia WISE126R Instrukcja

15 Października 2024

Freggia WISE126B Instrukcja

15 Października 2024

Freggia WISE126 Instrukcja

15 Października 2024

Freggia WISA105 Instrukcja

15 Października 2024

Freggia WISA106 Instrukcja

15 Października 2024