Instrukcja obsługi Bauknecht WAE 8759

Bauknecht pralka WAE 8759

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bauknecht WAE 8759 (17 stron) w kategorii pralka. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/17

Bauknecht AG, Industriestrasse 36, 5600 Lenzburg, www.bauknecht.ch

Verkauf Telefon 0848 801 002 Fax 0848 801 017 verkauf@bauknecht.ch

Kundendienst Telefon 0848 801 001 Fax 0848 801 003 service@bauknecht.ch

Ersatzteile Telefon 0848 801 005 Fax 0848 801 004 ersatzteilverkauf@bauknecht.ch

Instructions for use

WAE 8759

GB PROGRAMME CHART

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of

Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the

instructions on the garment label and those issued in this programme chart. M0702

❉:optional / Yes : dosing required

1) For improved garment care, spin speed is restricted in these programmes. 5019 401 05518

Programme

Tempe-

rature Care

Labels

Max

Load

Type of wash/Notes

- Respect the manufacturer’s recommendations on the care label

Detergents and additives Selectable options Start delay

Start-

vorwahl

Départ différé

Spin

Pre-

wash Main

wash Softener Clean +

Clean +

Pre-

wash

Vorwäsche

Prélavage

Rinse

hold

Spülstopp

Arrêt

Cuve Pleine

Intensive

rinse

Intensiv

spülen

Rinçage

Variable

spin

Schleudern

Essorage

Max

Spin

Speed

rpm

White Cotton /

Hygienic + 70 - 95 °C 8.0 Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.

made of cotton and linen.

At a temperature of 80°C or more, this programme eliminates bacteria, ensuring

sanitization of your laundry. The bacteria removal efficiency has been tested following

a similar methodology to the NF EN 13697 standard of Nov. 2001.

❉Ye s ❉ ❉ ❉ ❉ ❉ ❉ ❉

max.

Coloured

Cotton Buntwäsche

Couleurs 20 - 60 °C 8.0

Synthetics Pflegeleicht

Synthétiques 20 - 60 °C

3.5 Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),

polyamide (Perlon, Nylon) or blends with cotton. ❉Ye s ❉ ❉ ❉ ❉ ❉ ❉ ❉

max.

Delicates Feinwäsche

Délicat 20 - 40 °C 2.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses. ❉Ye s ❉—❉ ❉ —❉ ❉ 1000

Wool 20 - 40 °C 2.0 Only woollens, labelled with the Woolmark and identified as machine washable.

This programme (40°C) is tested and approved by The Woolmark Company for

machine washable wool. —Ye s ❉— — ❉—❉ ❉ 1000

Handwash 20 - 40 °C 2.0 Textiles made of silk, linen, wool and viscose marked as “handwashable”.

This programme (40°C) is tested and approved by The Woolmark Company for

handwashable wool. —Ye s ❉— — ❉—❉ ❉

400 1)

Lingerie Dessous

Lingerie 20 - 30 °C 2.0 This programme is particularly suitable to treat delicate lingerie (use of a laundry net

strongly recommended). —Ye s ❉— — ❉—❉ ❉

400 1)

Eco Cotton Baumwolle Eco

Coton Eco 60 °C 8.0 Heavily soiled and robust laundry washable at 60°C such as bed linen, table linen, towels etc.

The extended programme duration enables economic energy and water consumption

while maintaining good washing results. —Ye s ❉— — ❉ ❉ ❉ ❉

max.

Sport Sport 20 - 30 °C 3.5 Normally soiled and sweaty sportswear made of cotton jersey or microfibers.

This programme includes a prewash cycle – you can add detergent also to the prewash

chamber. Do not add any softener.

❉Ye s — — — ❉ ❉ ❉ ❉

max.

Super Eco Super Eco 20 - 60 °C 8.0

Normally to heavily soiled and robust bed linen, table linen and underwear, towels,

shirts etc. made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be

run overnight to additionally profit from the more favourable energy rates. To avoid noise

of spinning at night, set spin speed to “0” and start spin programme in the morning, or

define programme start with “Start delay” accordingly.

—Ye s ❉— — ❉ ❉ ❉ ❉

max.

Daily load Mischwäsche

Mixte 20 - 60 °C

6.0 Slightly to normally soiled textiles made of cotton and/or synthetics. —Ye s ❉— — ❉ ❉ ❉ ❉

max.

Speed 15 Kurz 15

Chrono 15 20 - 30 °C 3.0 Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with

cotton. Use lowest recommended detergent amount. —Ye s ❉— — ❉—❉ ❉

max.

Rinse & Spin Spülen & Schleudern

Rinçage & Essorage — — 8.0 Same as the last rinse and the final spin in the “Cotton” programme. — — ❉— — ❉ ❉ ❉ ❉

max.

Spin Schleudern

Essorage — — 8.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. — — — — — — — ❉ ❉

max.

A. Programme selector

B. Display

C. “Temperature” button

D. “Variable spin” button

E. “Start delay” button

F. “Start (Pause)” button

G. “Reset/Drain” button

H. “Favourites” button

I. Programme sequence indication

J. “Door open” indication

K. “Child lock” indication

L. “Detergent overdosage” indication

M. Red failure indications

A F

}

IJ M

5019 401 05518

Add detergent as indicated on the front page and as described in

the chapter “Detergent and Additives” in your Instructions for Use

(remove separator in detergent dispenser for use of powder

detergent if necessary).

Turn the programme selector to the desired programme; the light

of the “Start (Pause)” button blinks. The temperature and spin

speed indicated on the display can be altered by pressing the

“Temperature” button or the “Variable spin” button.

When the combination of programme and additional option(s) is

not possible, the indication lights switch off automatically.

Unsuitable combinations of options are deselected automatically.

“Clean+” button

• Choose this option if you use an in-wash additive for stain removal

(powder, for example “Vanish”) - it will optimize the additive’s

efficiency to get better wash performance and stain removal.

• Choose temperature of 30 or 40°C and use with maximum load.

• Add an appropriate amount of in-wash additive for stain

removal (powder) to the main wash chamber, together with

your detergent (only use powder detergent with this option).

Respect the manufacturer’s dosing instructions.

• Prolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen

basis. Chlorine or perborate bleaches must not be used!

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt)

sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating

the “Prewash” option.

“Rinse hold” button

• The laundry remains in the last rinse water, without

progressing to the fnal spin cycle, to avoid creasing and

prevent colours from changing.

• The programme stops to “Rinse hold” when the “Rinse hold”

symbol on the display blinks; the light of the “Start

(Pause)” button blinks as well.

• To terminate the “Rinse hold” by draining the water, without

any spinning, press the “Start (Pause)” button.

• To terminate the “Rinse hold” by spinning the laundry, press

the "Variable spin" button to select the desired spin speed and

then “Start (Pause)” to start the spin cycle.

• Do not leave the laundry to soak for too long in the “Rinse hold”.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water or

for washing baby linen, and helps people with allergies.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but

intermediate spin peaks remain during rinse. The water is

drained out only.

If there is a programme setting which you use frequently, the

appliance offers the possibility to save one setting for each

programme so that it can be used again by just pushing one button.

• Select the desired programme, temperature, spin speed and

option(s), push and hold the “Favourites” button for at least 3

seconds. The lamp of the “Favourites” button shortly blinks and

then lights up - the programme setting is saved.

CONSUMPTION DATA

Programme Temperature

(°C) Load

(kg) Water

(l) Energy

(kWh) Approx. Programme Duration

(hours : minutes)*

White Cotton / Hygiene + 95 8.0 82 ** 2.40 2:20

Coloured Cotton 60 8.0 59 1.36 2:20

Coloured Cotton 40 8.0 77 0.75 2:05

Synthetics 60 3.5 46** 0.85 1:35

Synthetics 40 3.5 42 0.50 1:20

Delicates 30 2.5 60 0.40 0:45

Wool 40 2.0 60 0.60 0:45

Handwash 40 2.0 45 0.60 0:40

Lingerie 30 2.0 45 0.35 0:36

Eco Cotton*** 60 598.0 1.04 4:00

Sport 30 3.5 54 0.55 1:34

Super Eco 60 8.0 75 0.95 4:00

Daily load 40 6.0 73 0.60 1:00

Speed 15 30 3.0 30 0.20 0:15

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home

may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

*The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions

applicable at that time.

** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

*** Reference Programme for Energy Label (with separator in detergent dispenser removed for use of powder detergent).

ADD DETERGENTS, CLOSE THE DOOR

AND SELECT THE PROGRAMME

SELECT ANY DESIRED OPTION

SAVE YOUR FAVOURITE PROGRAMMES

Next time you want to use your individual programme setting,

select the programme, shortly push the “Favourites” button and

start by pushing “Start (Pause)”.

If you want to replace the saved programme setting by another

one, proceed as already described above.

The “Start delay” allows to run the machine at the consumer’s

convenience, for example at night when electricity is cheaper. Do

not use liquid detergent when activating the “Start delay”.

• Select programme, temperature, spin speed and options.

• Press the Start delay button to select one of the delay time

steps between 0:30 and 23:00 hours.

• Press the “Start (Pause)” button; the light stops blinking and

becomes solid.

The countdown of the delay time begins; the clock symbol next to

the delay time and the colon between hours and minutes blink.

• The time delay indication disappears when the programme

starts and it is replaced by the remaining programme time.

To cancel the “Start delay”

..before you press the “Start (Pause)” button:

• Press the “Reset/Drain” button, or set the start delay time to

“0:00” - the delay time disappears after a few seconds.

..after having pressed the “Start (Pause)” button:

Press the “Start (Pause)” button - the delay time disappears

from the display; press “Start (Pause)” again to start the selected

programme immediately.

Before starting and after end of a programme, the symbol lights to

show that the door can be opened. As long as a wash programme is

running, the door remains locked and must on no account be forced

open. In case you have to open it urgently during a running

programme, refer to “Reset a running programme before the end”.

Open the tap and press the “Start (Pause)” button; the blinking

“Start (Pause)” button light becomes constant. The programme

sequence indicator shows the current programme phase, running

from left to right through wash, rinse, spin, drain. In some phases, the

remaining programme time is newly calculated - if this is the case, the

“green intelligence sensor” on the display will fade,

and the remaining time is replaced by an animation.

Activating the child lock prevents children from starting a wash

cycle or changing the settings of a running programme. The child

lock cannot be activated or deactivated when the programme

selector is in the “Off/O” position. To activate the child lock:

• Turn the programme selector to a programme position, or run

a programme as usual.

• Press the “Temperature” and the “Variable spin” button

simultaneously for at least 3 seconds. The “Child lock” symbol

will shortly blink and then light up to indicate that the

child lock is active.

The programme setting cannot be changed anymore; the only change

possible is to switch the washer off by turning the programme selector

to the “Off/O” position. To deactivate the child lock, proceed in the

same way as for activating it.

If one of the red failure indications on the display lights up, refer to

the “Troubleshooting Guide” in your “Instructions for Use”.

• The display shows “End”, and the “Door open” indication

lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

• Leave the door ajar to allow the drum to dry.

• If you do not turn the programme selector to the “Off / O”

position, all lights of the control panel go out after a few minutes

to save energy - only “End” will remain on the display.

The symbol will light up at the end of the programme if you used

too much detergent. Use less detergent next time. If the symbol

lights up and the display shows “Fod”, too much foam interrupted

the wash process; refer to the “Troubleshooting Guide” in your

Instructions for Use.

1. Press the “Start (Pause)” button to pause the programme.

The light blinks.

2. Select the new programme, temperature, any options and

another spin speed if you want.

3. Press the “Start (Pause)” button again. The new programme

continues at the same position where the previous programme was

interrupted. Do not add detergent for this programme.

The “Reset/Drain” button cancels a programme before the end.

• Press the “Reset/Drain” button for at least 3 seconds; an

animation appears on the display. Any existing water is drained

out before the door can be opened.

START DELAY

“DOOR OPEN” INDICATION

PROGRAMME START

CHILD LOCK

RED FAILURE INDICATIONS

PROGRAMME END

DETERGENT OVERDOSAGE INDICATION

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

RESET A RUNNING PROGRAMME BEFORE

THE END

The Sensor Technology automatically adapts ption to the size of your wash load. Programme Time, Water and Energy consum

Specyfikacje produktu

Marka:	Bauknecht
Kategoria:	pralka
Model:	WAE 8759

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bauknecht WAE 8759, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje pralka Bauknecht

Bauknecht WM Class 7A Instrukcja

9 Października 2024

Bauknecht WM Sense 824 PS Instrukcja

9 Października 2024

Bauknecht B7X 89 SILENCE DE Instrukcja

8 Października 2024

Bauknecht WA Plus 726 BW Instrukcja

7 Października 2024

Bauknecht B8 W046WB DE Instrukcja

6 Października 2024

Bauknecht B8 W046WB BE Instrukcja

6 Października 2024

Bauknecht NBM22 863E WA EU N Instrukcja

6 Października 2024

Bauknecht NM22L 7469 WSE BE Instrukcja

5 Października 2024

Bauknecht WM Sense 8A Instrukcja

5 Października 2024

Bauknecht B7 99 SILENCE DE Instrukcja

4 Października 2024

Instrukcje pralka

Najnowsze instrukcje dla pralka

Candy CS 15102D3-80 Instrukcja

15 Października 2024

GE GSD3715FAA Instrukcja

15 Października 2024

Siemens iQ700 WI14W540EU Instrukcja

15 Października 2024

LG WTP22BK Instrukcja

15 Października 2024

Freggia WTIE148 Instrukcja

15 Października 2024

Freggia WISE126R Instrukcja

15 Października 2024

Freggia WISE126B Instrukcja

15 Października 2024

Freggia WISE126 Instrukcja

15 Października 2024

Freggia WISA105 Instrukcja

15 Października 2024

Freggia WISA106 Instrukcja

15 Października 2024