Instrukcja obsługi Bauknecht TRK 69760

Bauknecht Suszarka bębnowa TRK 69760

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bauknecht TRK 69760 (3 stron) w kategorii Suszarka bębnowa. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
Bauknecht AG, Industriestrasse 36, 5600 Lenzburg, www.bauknecht.ch
Verkauf Telefon 0848 801 002 Fax 0848 801 017 verkauf@bauknecht.ch
Kundendienst Telefon 0848 801 001 Fax 0848 801 003 service@bauknecht.ch
Ersatzteile Telefon 0848 801 005 Fax 0848 801 004 ersatzteilverkauf@bauknecht.ch
Instructions for use
TRK 69760
5019 407 00473
Very
Wet
Load
Wet
Load Load
Kg
Fabric
programmes
& Drying
levels
Drying options Buzzer & Anti-Crease
cannot be selected together
Gentle
Reduces drying
intensity
(recommended
for delicate items)
Dryness
Adjustment
(Adjusts Dryness
Level according
to wishes)
Buzzer Signals/
Sounds end of
drying cycle at
Intervals
Anti-Crease
Prevents
laundry from
creasing
Start Delay
Delays the
drying cycle
start
Indicative
drying
times (in
minutes)
105
170 90
140 3.0
6.0 Cotton
max 6 kg
Cupboard
extra dry
85
150 70
120 3.0
6.0 Cupboard
dry *
70
120 60
100 3.0
6.0 Iron dry *
40
60 30
40 1.0
2.5 Synthetics
max 2.5 kg
Cupboard
dry *
30
50 20
30 1.0
2.5 Iron dry
115 100 2.5
Delicate
max 2.5 kg
Low drying intensity
for delicates and
garments labelled
.- -
--- Airing Laundry is aired and
refreshed for
30 minutes without
heating. - -
--- Completes drying or
dries single items
(suitable for all
fabrics). - -
TRK 69760GB
QUICK REFERENCE GUIDE
Please also carefully read the
Instructions for Use.
CottonSyntheticsDelicate
AiringTime
* Test programmes according IEC 61121
Start
Pause Starts the drying cycle. The Start/
Pause indicator lamp is blinking
during the selection phase.
Press to confirm the final selection.
Programme
selection Turn the programme selector knob to the
desired programme. The indicator next to
the programme name lights up. The start
indicator blinks to show, that the dryer is
in selection mode. After the Start / Pause
button is pressed the start indicator lamp
lights up and the programme starts.
Start delay
Delays the drying cycle start from 1
up to 12 hours.
To select the start delay turn the programme
selector knob to the desired programme,
select the desired options and press the start
delay button. With each touch of the start
delay button, drying cycle start is delayed by
one hour. Press the Start/Pause button to
confirm your final selection. Start delay
indicator blinks and the count-down is
running by reducing the time in one hour
steps. The count-down is indicated by the
blinking of the start-delay indicator located
above the button. During count-down the
drum will turn from time to time to
redistribute the laundry and the pump may
be heard working for a short time.
To cancel or to change the previously set
time turn programme selector knob to 0
or open the door.
Remaining time
indication After cycle start a default drying time is
indicated depending on the selected
drying programme and the dryness
adjustment. After several minutes the
time will be adjusted to the real expected
remaining time, depending on size, type
and humidity of the load.
Dryness
Adjustment
Dryness adjustment is an option to adjust
the dryness of the laundry according to your
wishes. Select the desired programme and
the option dryness level adjustment by
pressing the button +for more dry or the
button  for more humid. The selected
dryness will be stored as a pre-setting to the
selected drying programme. Using the
drying programme next time the pre-setting
appears. By pressing the dryness adjustment
buttons+ or  the pre-setting can be
changed.
Filter The indicator lamp lights up when the
filter needs cleaning. Clean the filter at
the end of every cycle.
Water
Container
Lights up when water container needs to
be emptied. The drying cycle is
automatically interrupted. Empty the
water container. Press the Start/Pause
button to restart the dryer and to
continue the programme.
PROGRAMME SEQUENCE INDICATION
End The programme sequence is indicated
by lamps, switching on when
programme step starts and switching
off when the programme step is
passed.
5019 407 00473
1. Check that all fastenings are closed and
that pockets are empty.
2. Turn the articles inside out.
3. Place laundry loosely in the drum to
make sure it doesnt become tangled.
Sort laundry as follows:
A) By care symbols (on the collar or
inside seam):
Suitable for tumble drying
Tumble drying with reduced
drying intensity only. Press
gentle button or select specific
programme
Do not tumble dry
B) By amount and thickness/weight
Whenever the load to be dried exceeds
dryer capacity, separate laundry
according to weight (e.g. towels from
thin underwear).
C) By type of fabrics
Cotton/linen: towels, cotton jersey,
bed and table linen made of cotton or
linen.
Synthetics/Easy Care: blouses, shirts,
overalls, etc. made of polyester or
polyamide, as well as cotton/synthetic
mixes.
D) By drying level
Sort into: iron dry, cupboard dry, etc.
Do not tumble dry: woollens, silk, nylon
stockings, delicate embroidery, fabrics
with metallic decorations, bulky items such
as sleeping bags, etc.
Important: only use specific indicated
dryer-safe additives and rinse items
that have been treated with stain remover
thoroughly in plenty of water before
drying. Only use specific indicated
dryer-safe plastic items and never dry
rubber or articles contaminated with
vegetable oil in the dryer
(Option only available when
Programme is selected).
Push the button to turn the drum light on
for 30 sec. and push again to turn the
drum light off.
Programme and Options:
To select a programme, turn the
programme selector knob to the
required position. The Start/Pause
indicator lamp is blinking, indicating
that the cycle needs to be started.
To select an option, press the
corresponding button. The indicator light
above the button lights up confirming
that the selection has been made.
Press the option button again to cancel
the option.
1. Having selected the desired
programme and options, press the
Start/Pause button.
If the laundry is not removed at the
end of the drying cycle, an automatic
anti-crease cycle will operate for
maximum 60 min. The drum rotates at
regular intervals, preventing the
laundry from creasing.
Anti-Crease protection re-distributes
laundry in the drum.
When the Anti-Crease option is selected
and laundry has not been taken out, an
anti-crease cycle is activated for 12 hrs.
2. On completion of the programme, set
the programme selector knob to
position 0.
When changing the programme during
the drying cycle, the dryer stops. The Start/
Pause indicator lamp is blinking.
To operate the new programme, press the
Start/Pause button.
To interrupt the dryer during operation
1. Set the programme selector knob to
Airing.
2. Press the Start/Pause button.
Wait at least 5 minutes before opening
the door to allow the dryer to cool down.
For your safety the programme stops
automatically if you open the door.
3. To restart, after door opening, close
the door and press the Start/Pause
button again.
Clean the lint filter at the end of every
drying cycle:
1. Open the door.
2. Pull the filter upwards.
3. Open the filter.
4. Remove lint using a soft brush or your
fingertips.
5. Close the filter.
6. Push the filter back into place.
Empty the water container at the end
of every drying cycle.
1. Pull the handle to remove the water
container.
2. Empty the water container.
3. Replace the water container when
empty by pushing it completely back
in place.
If a fault occurs, before contacting our
After-Sales Service, make the
following checks to try and remedy
the problem:
Drying takes too long / laundry is not
dry enough:
Was the correct programme selected?
Was the inserted laundry too wet
(Washing machine spin speed less than
800 rpm? When the spinning speed is
less than 800 rpm the water container
fault may occur during the drying cycle)?
Is the lint filter dirty (filter indicator
lamp on)?
Is the heat exchanger dirty (refer to the
Instructions for use)?
Are the END and Anti-crease indicator
lamps lighting up? The drying cycle is
complete and the laundry can be taken
out.
Is the ambient temperature too high?
The dryer does not operate:
(after a power failure and/or
interruption to the mains supply,
always press the Start/Pause button).
Is the plug properly inserted into the
mains electricity socket?
Is there a power failure?
Has the fuse blown?
Is the door properly closed?
Has the programme been selected?
Has the start-delay option been selected?
Has the Start/Pause button been
pressed?
Lint filter or water container indicator
lamp on:
Is the lint filter clean?
Is the water container empty?
Is the water container correctly
positioned?
Is the heat exchanger clean?
Water droplets underneath the dryer:
Is the heat exchanger correctly
positioned?
Has any fluff on the heat exchanger
seal been wiped away?
Has any fluff on the door seal been
wiped away?
Has the water container been
positioned correctly?
All programme sequence indicators
blinking:
Service call necessary.
Replacing the drum light bulb (if
supplied):
If the inside lamp does not work, the bulb
may be faulty.
Unplug the dryer.
Open the door and unscrew the glass
cover insie the drum.
Replace the faulty bulb with a new one
and screw the glass cover back on.
Replacement bulb: Philips 15W,
230/240V, E14.
If, after carrying out the above checks the
malfunction persists or appears again, turn
the dryer off and call our After-Sales
Service (refer to guarantee).
Please specify:
The nature of the fault.
The dryer type and model.
The service code (the number after the
word Service on the adhesive rating
plate) on the right-hand side when the
door is open.
Your full address and phone number.
PREPARING THE LAUNDRY
DRUM LIGHT OPTION
SELECTING A PROGRAMME & OPTIONS
STARTING & COMPLETING A
PROGRAMME
CHANGING A PROGRAMME
INTERRUPTING A PROGRAMME
DAILY MAINTENANCE & CLEANING
TROUBLESHOOTING GUIDE
AFTER-SALES SERVICE

Specyfikacje produktu

Marka: Bauknecht
Kategoria: Suszarka bębnowa
Model: TRK 69760

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bauknecht TRK 69760, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Suszarka bębnowa Bauknecht

Bauknecht

Bauknecht TRKK STUTTGART/2 Instrukcja

8 Października 2024
Bauknecht

Bauknecht TK Prime 75A3 BW Instrukcja

26 Września 2024
Bauknecht

Bauknecht T M11 9X3SKY CH Instrukcja

23 Września 2024
Bauknecht

Bauknecht WMC 6L55 Instrukcja

21 Września 2024
Bauknecht

Bauknecht TRKB 7570 Instrukcja

17 Września 2024
Bauknecht

Bauknecht TRK 4970 Instrukcja

16 Września 2024
Bauknecht

Bauknecht T M11 8X3EY DE Instrukcja

14 Września 2024
Bauknecht

Bauknecht TSenseD8X2SK Instrukcja

14 Września 2024
Bauknecht

Bauknecht TR Style 82A3 TD KONN Instrukcja

14 Września 2024
Bauknecht

Bauknecht TN M11 8X2SK CH Instrukcja

12 Września 2024

Instrukcje Suszarka bębnowa

Najnowsze instrukcje dla Suszarka bębnowa

Asko

Asko T410HD.W.AU Instrukcja

15 Października 2024
Bosch

Bosch WTH8300CNL Instrukcja

15 Października 2024
Adler

Adler AD 2279 Instrukcja

15 Października 2024
Haier

Haier HWD90-B14959NU1 Instrukcja

15 Października 2024
Haier

Haier HWD100-B14959S8NU1 Instrukcja

15 Października 2024
Haier

Haier HWD100-B14959NU1 Instrukcja

15 Października 2024
Haier

Haier HWD80-B14959S8NU1 Instrukcja

15 Października 2024
Teka

Teka THPD80 Instrukcja

15 Października 2024
Indesit

Indesit IDV 75 B K (UK) Instrukcja

14 Października 2024
Indesit

Indesit YT M11 82 X UK Instrukcja

14 Października 2024