Instrukcja obsługi Bauknecht TRK 69700

Bauknecht Suszarka bębnowa TRK 69700

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bauknecht TRK 69700 (3 stron) w kategorii Suszarka bębnowa. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

Bauknecht AG, Industriestrasse 36, 5600 Lenzburg, www.bauknecht.ch

Verkauf Telefon 0848 801 002 Fax 0848 801 017 verkauf@bauknecht.ch

Kundendienst Telefon 0848 801 001 Fax 0848 801 003 service@bauknecht.ch

Ersatzteile Telefon 0848 801 005 Fax 0848 801 004 ersatzteilverkauf@bauknecht.ch

Instructions for use

TRK 69700

5019 407 00130

Very

Wet

Load

Wet

Load

Kg Fabric

programmes

& Drying

levels

Drying options Buzzer & Anti-Crease

cannot be selected together

Gentle

Reduces drying

intensity

(recommended

for delicate items)

Dryness

Adjustment

(Adjusts Dryness

Level according

to wishes)

Buzzer Signals/

Sounds end of

drying cycle at

Intervals

Anti-Crease

Prevents

laundry from

creasing

Start Delay

Delays the

drying cycle

start

Indicative

drying

times (in

minutes)

95’

135’

80’

110’

3.0

5.0 Cotton

max 5 kg

Cupboard

extra dry

80’

110’

60’

90’

3.0

5.0

Cupboard

dry *

60’

90’

50’

70’

3.0

5.0 Iron dry *

25’

45’

20’

35’

1.0

2.5 Synthetics

max 2.5 kg

Cupboard

dry * -

20’

35’

15’

25’

1.0

2.5 Iron dry -

30’ 20’ 1.5

Delicate

max 1.5 kg

Especially for delicate

items (e.g. shirts). - - -

- - - Airing Laundry is aired

and refreshed for

30 minutes

without heating.

- -

- - -

Completes drying

or dries single

items (suitable for

all fabrics).

- -

TRK 69700GB

QUICK REFERENCE GUIDE

Please also carefully read the

“Instructions for Use”.

Cotton

Synthetics

DelicateAiringTime

* Test programmes according IEC 61121

Start

Pause Starts the drying cycle. The Start/

Pause indicator lamp is blinking

during the selection phase.

Press to confirm the final selection.

Programme

selection

Turn the programme selector knob to the

desired programme. The indicator next to

the programme name lights up. The start

indicator blinks to show, that the dryer is

in selection mode. After the Start / Pause

button is pressed the start indicator lamp

lights up and the programme starts.

Start delay

Delays the drying cycle start from 1

up to 12 hours.

To select the start delay turn the

programme selector knob to the desired

programme, select the desired options and

press the start delay button. With each

touch of the start delay button, drying cycle

start is delayed by one hour. Press the Start/

Pause button to confirm your final selection.

Start delay indicator blinks and the count-

down is running by reducing the time in one

hour steps. The count-down is indicated by

the blinking of the start-delay indicator

located above the button. During count-

down the drum will turn from time to time

to redistribute the laundry and the pump

may be heard working for a short time.

To cancel or to change the previously set

time turn programme selector knob to “0”

or open the door.

Remaining time

indication After cycle start a default drying time is

indicated depending on the selected

drying programme and the dryness

adjustment. After several minutes the

time will be adjusted to the real expected

remaining time, depending on size, type

and humidity of the load.

Dryness

Adjustment

Dryness adjustment is an option to adjust

the dryness of the laundry according to your

wishes. Select the desired programme and

the option dryness level adjustment by

pressing the button “

+“ for more dry or the

button “–“ for more humid. The selected

dryness will be stored as a pre-setting to the

selected drying programme. Using the

drying programme next time the pre-setting

appears. By pressing the dryness adjustment

buttons “+” or “–” the pre-setting can be

changed.

Filter The indicator lamp lights up when the

filter needs cleaning.

Clean the filter at

the end of every cycle.

Water

Container

Lights up when water container needs to

be emptied. The drying cycle is

automatically interrupted.

Empty the

water container.

Press the Start/Pause

button to restart the dryer and to

continue the programme.

PROGRAMME SEQUENCE INDICATION

End The programme sequence is indicated

by lamps, switching on when

programme step starts and switching

off when the programme step is

passed.

5019 407 00130

1. Check that all fastenings are closed and

that pockets are empty.

2. Turn the articles inside out.

3. Place laundry loosely in the drum to

make sure it doesn’t become tangled.

Sort laundry as follows:

A) By care symbols (on the collar or

inside seam):

Suitable for tumble drying

Tumble drying with reduced

drying intensity only. Press

gentle button

Do not tumble dry

B) By amount and thickness/weight

Whenever the load to be dried exceeds

dryer capacity, separate laundry

according to weight (e.g. towels from

thin underwear).

C) By type of fabrics

Cotton/linen: towels, cotton jersey,

bed and table linen made of cotton or

linen.

Synthetics/Easy Care: blouses, shirts,

overalls, etc. made of polyester or

polyamide, as well as cotton/synthetic

mixes.

D) By drying level

• Sort into: iron dry, cupboard dry, etc.

Do not tumble dry: woollens, silk, nylon

stockings, delicate embroidery, fabrics

with metallic decorations, bulky items such

as sleeping bags, etc.

Important: only use specific indicated

dryer-safe additives and rinse items

that have been treated with stain remover

thoroughly in plenty of water before

drying. Only use specific indicated

dryer-safe plastic items and never dry

rubber or articles contaminated with

vegetable oil in the dryer

(Option only available when

Programme is selected).

• Push the button to turn the drum light on

for 30 sec. and push again to turn the

drum light off.

Programme and Options:

• To select a programme, turn the

programme selector knob to the

required position. The Start/Pause

indicator lamp is blinking, indicating

that the cycle needs to be started.

• To select an option, press the

corresponding button. The indicator light

above the button lights up confirming

that the selection has been made.

• Press the option button again to cancel

the option.

1. Having selected the desired

programme and options, press the

Start/Pause button.

If the laundry is not removed at the

end of the drying cycle, an automatic

anti-crease cycle will operate for

maximum 60 min. The drum rotates at

regular intervals, preventing the

laundry from creasing.

Anti-Crease protection re-distributes

laundry in the drum.

When the Anti-Crease option is selected

and laundry has not been taken out, an

anti-crease cycle is activated for 12 hrs.

2. On completion of the programme, set

the programme selector knob to

position “0”.

When changing the programme during

the drying cycle, the dryer stops. The Start/

Pause indicator lamp is blinking.

To operate the new programme, press the

Start/Pause button.

To interrupt the dryer during operation

1. Set the programme selector knob to

Airing.

2. Press the Start/Pause button.

Wait at least 5 minutes before opening

the door to allow the dryer to cool down.

For your safety the programme stops

automatically if you open the door.

3. To restart, after door opening, close

the door and press the Start/Pause

button again.

Clean the lint filter at the end of every

drying cycle:

1. Open the door.

2. Pull the filter upwards.

3. Open the filter.

4. Remove lint using a soft brush or your

fingertips.

5. Close the filter.

6. Push the filter back into place.

Empty the water container at the end

of every drying cycle.

1. Pull the handle to remove the water

container.

2. Empty the water container.

3. Replace the water container when

empty by pushing it completely back

in place.

If a fault occurs, before contacting our

After-Sales Service, make the

following checks to try and remedy

the problem:

Drying takes too long / laundry is not

dry enough:

• Was the correct programme selected?

• Was the inserted laundry too wet

(Washing machine spin speed less than

800 rpm? When the spinning speed is

less than 800 rpm the water container

fault may occur during the drying cycle)?

• Is the lint filter dirty (filter indicator

lamp on)?

• Is the heat exchanger dirty (refer to the

Instructions for use)?

• Is the ambient temperature too high?

The dryer does not operate:

(after a power failure and/or

interruption to the mains supply,

always press the Start/Pause button).

• Is the plug properly inserted into the

mains electricity socket?

• Is there a power failure?

• Has the fuse blown?

• Is the door properly closed?

• Has the programme been selected?

• Has the start-delay option been selected?

• Has the Start/Pause button been

pressed?

Lint filter or water container indicator

lamp on:

• Is the lint filter clean?

• Is the water container empty?

• Is the water container correctly

positioned?

• Is the heat exchanger clean?

Water droplets underneath the dryer:

• Is the heat exchanger correctly

positioned?

• Has any fluff on the heat exchanger

seal been wiped away?

• Has any fluff on the door seal been

wiped away?

• Has the water container been

positioned correctly?

All programme sequence indicators

blinking:

• Service call necessary.

Replacing the drum light bulb (if

supplied):

• If the inside lamp does not work, the bulb

may be faulty.

• Unplug the dryer.

• Open the door and unscrew the glass

cover insie the drum.

• Replace the faulty bulb with a new one

and screw the glass cover back on.

• Replacement bulb: Philips 15W,

230/240V, E14.

If, after carrying out the above checks the

malfunction persists or appears again, turn

the dryer off and call our After-Sales

Service (refer to guarantee).

Please specify:

• The nature of the fault.

• The dryer type and model.

• The service code (the number after the

word Service on the adhesive rating

plate) on the right-hand side when the

door is open.

• Your full address and phone number.

PREPARING THE LAUNDRY

DRUM LIGHT OPTION

SELECTING A PROGRAMME & OPTIONS

STARTING & COMPLETING A

PROGRAMME

CHANGING A PROGRAMME

INTERRUPTING A PROGRAMME

DAILY MAINTENANCE & CLEANING

TROUBLESHOOTING GUIDE

AFTER-SALES SERVICE

Specyfikacje produktu

Marka:	Bauknecht
Kategoria:	Suszarka bębnowa
Model:	TRK 69700

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bauknecht TRK 69700, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Suszarka bębnowa Bauknecht

Bauknecht TRKK STUTTGART/2 Instrukcja

8 Października 2024

Bauknecht TK Prime 75A3 BW Instrukcja

26 Września 2024

Bauknecht T M11 9X3SKY CH Instrukcja

23 Września 2024

Bauknecht WMC 6L55 Instrukcja

21 Września 2024

Bauknecht TRKB 7570 Instrukcja

17 Września 2024

Bauknecht TRK 4970 Instrukcja

16 Września 2024

Bauknecht T M11 8X3EY DE Instrukcja

14 Września 2024

Bauknecht TSenseD8X2SK Instrukcja

14 Września 2024

Bauknecht TR Style 82A3 TD KONN Instrukcja

14 Września 2024

Bauknecht TN M11 8X2SK CH Instrukcja

12 Września 2024

Instrukcje Suszarka bębnowa

Najnowsze instrukcje dla Suszarka bębnowa

Asko T410HD.W.AU Instrukcja

15 Października 2024

Bosch WTH8300CNL Instrukcja

15 Października 2024

Adler AD 2279 Instrukcja

15 Października 2024

Haier HWD90-B14959NU1 Instrukcja

15 Października 2024

Haier HWD100-B14959S8NU1 Instrukcja

15 Października 2024

Haier HWD100-B14959NU1 Instrukcja

15 Października 2024

Haier HWD80-B14959S8NU1 Instrukcja

15 Października 2024

Teka THPD80 Instrukcja

15 Października 2024

Indesit IDV 75 B K (UK) Instrukcja

14 Października 2024

Indesit YT M11 82 X UK Instrukcja

14 Października 2024