Instrukcja obsługi Bauknecht Excellence WA 1200

Bauknecht pralka Excellence WA 1200

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bauknecht Excellence WA 1200 (2 stron) w kategorii pralka. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
GB EXCELLENCE WA 1200 PROGRAMME CHART
5019 401 05165
1) For improved garment care spin speed is restricted to 1000 rpm in this programme.
2) For improved garment care spin speed is restricted to 400 rpm in this programme.
This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately, e.g.:
A. “Pump” indicator
B. Water Tap” indicator
Check your washing machine's water supply.
C. “Aquastop” indicator
Can be released by excess foaming or a leak in
the washing machine (see also instructions for
use “Troubleshooting”).
D. “Door Locked” indicator
As long as a washing programme is running, the lamp
lights up to show that the door cannot be opened.
E. “Start” button
F. Program Sequence Indicator
G.“Spin Speed Reduction” button
H.Reset” button
I. Selectable programmes
Programme Care
Labels
Type of wash/
Degree of soiling
Max.
load
Detergent and Additives Selectable Special Options = Tempe-
rature
Max.
Spin
speed
Notes
Softener Main
wash
Pre-
wash
Pre-
wash
Intensive
Rinse
Rinse
hold
Speed
reduction
Kg Vorwäsche Intensiv
Spülen Spülstopp Schleudern °C rpm
Cotton
Koch- Buntwäsche
Normally to heavily soiled bed linen,
table linen and underwear, towels, shirts etc. made of
cotton and linen. 6.0 Ye s ❉ ❉ 30-40
60-95 1200 “Prewash” can be additionally selected for heavily
soiled laundry at any temperature.
Synthetic
Pflegeleicht
Normally soiled blouses, shirts and other outer
clothing made of polyester (Diolen, Trevira), polyamide
(Perlon, Nylon) or mixtures of these fibres with
cotton.
2.5 Ye s ❉ ❉ 1) 30-40-60 1000 1) “Prewash” can be additionally selected for heavily
soiled laundry.
Daily mixed
Mischwäsche
Slightly to normally soiled textiles made of cotton and/
or synthetic fibres. 3.0 Ye s – – 40 and 60 1200 In this programme the spin speed should be adapted to
the fabrics.
Rapid wash
Schnelle Wäsche
Hardly worn outer and sports clothing made of cotton,
polyester, polyamid and mixed cotton fabrics. 3.0 Ye s – – 30 1200
Delicate
Feinwäsche Curtains and delicate dresses, skirts, shirts and blouses. 1.5 Ye s ❉ ❉ ❉ ❉ 1) 30-40 1000 1)
Wool
Wolle
Only woollens with a felt-free finish, labelled with the
woolmark and identified as machine washable. 1.0 Ye s – – ❉ ❉ 1) cold
30-40 1000 1) If you select “Rinse Hold” do not leave items to soak
for too long.
Handwash
Handwäsche
Textiles made of linen, silk, wool or viscose marked as
“handwashable”. 1.0 Ye s – – ❉ ❉ 2) 30 400 2) If you select “Rinse Hold” do not leave items to soak
for too long. A very gentle spin is used in this
programme.
Rinse + Spin
Spülen + Schleudern 6.0 – – – ❉ ❉ 20 1200 Same as the spin cycle in the “Cotton” programme.
Spin
Schleudern 6.0 – – 1200 In this programme spinning is intensive. Same as the
spin cycle in the “Cotton programme.
Gentle spin
Schonschleudern 1.5 – – 1) 1000 1) A very gentle spin is used in this programme. Same
as the spin cycle in the “Wool” programme.
Drain
Abpumpen – – –
This programme only drains (alternative method of
terminating the programme after “Rinse Hold”
without spinning). In addition all running
programmes can be cancelled with this programme.
BF
I
D
A
E
{
G H
C
4GB05165.fm Page 1 Thursday, May 20, 2004 6:05 PM
Black process 45.0° 100.0 LPI
5019 401 05165
Add the detergent as described in the chapter
“Detergent and Additives” in the instructions for use.
1. Turn the programme selector knob in any
direction to the desired programme.
The light above the Startbutton flashes.
2. The programme sequence indicator and the
indicator with the maximum possible spin speed
light up.
“Prewash” button
Only for heavily soiled laundry (e.g. sand or
granular dirt). Programme duration is increased
by some 15 min.
“Intensive Rinse” button
An additional rinse cycle is carried out.
This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with detergent allergies.
“Rinse Hold” button
The laundry remains in the last rinse water without
being spun: discoloration of the laundry and
additional creasing are prevented.
This option is particularly recommended for the
programme “Synthetic” or “Delicate”.
This function is particularly useful if you want to
postpone spinning to a later time.
Note: The programme has reached the “Rinse
Hold” when the corresponding light flashes.
Terminate the “Rinse Hold” option:
Press the “Rinse Hold” button again; the
programme will terminate automatically with the
appropriate spin cycle for the current
programme.
If you do not wish to spin the clothes, turn the
programme selector knob to “Drain” and press
the “Start” button again.
“Speed Reduction” button
A maximum spin speed is assigned to each
programme.
Press the button to set another speed for the
spin cycle.
If no light goes on, the final spin is cancelled.
The water is only drained out.
CONSUMPTION DATA *
Programme Temperature
(°C)
Wash
(kg)
Water
(l)
Energy
(kWh)
Programme duration
approx.
(hours : minutes)
Cotton 95 6.0 54 1.90 2:00
Cotton 60 6.0 49 1.14 2:30
Cotton 40 5.0 47 0.70 2:05
Synthetic 60 2.5 55 0.80 1:35
Synthetic 40 2.5 50 0.50 1:20
Daily Mixed 40 3.0 48 0.55 1:00
Rapid wash 30 3.0 37 0.30 0:30
Delicate 30 1.5 60 0.50 0:45
Wool 40 1.0 60 0.50 0:40
Handwash 30 1.0 45 0.40 0:35
* The consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60456.
** The programme duration may also vary from the chart values. The washing machine is able to allow for particular
household conditions and to adapt the programme run time accordingly.
*** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains
the water out.
POUR IN DETERGENT, CLOSE THE DOOR
AND SELECT A PROGRAMME
SELECT SPECIAL OPTIONS - The
corresponding lights go on (if not selectable:
rapid flashing for 3 seconds)
After you have selected the programme and the
additional option, the indicator light over the
“Start” button flashes. Turn on the tap and start
the programme by pressing the “Start” button.
Now the indicator light above the button goes on.
In addition, all programme phases are indicated by
the associated lights. After the end of a programme
phase, the associated indicator light goes out. Thus
the programme sequence indicator moves from left
to right across the wash, rinse and spin phases. At
the end of the programme, only the “End” indicator
is still on.
As long as a washing programme is running, the
lamp lights up to show that the door cannot be
opened. When the lamp goes off, the door can be
opened again.
If “Start” has been pressed, but the door is not
latched, the “Door Locked” indicator flashes for 10
seconds. The door must be pushed shut within this
time. After the 10 seconds, the “Door Locked”
indicator goes out and the “Start” button flashes.
The door must then be opened and closed again and
the “Start” button must be pressed.
“Pump”
Waste water is not pumped out. Check wether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
“Water Tap”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide" in the
Instructions for Use.
“Aquastop”
Lighting up of the Aquastop indication can be caused
by a leak in the appliance or hose. Please refer to the
“Troubleshooting Guide" in the Instructions for Use.
The “End” indicator goes on.
1. Set the programme selector knob to the
“Offposition.
2. Turn off the tap.
3. Open the door and unload the machine.
A newly-selected programme will continue in the
same programme section during which the current
programme was interrupted. Therefore do not add
any more detergent.
1. Press the Start” button to interrupt the
programme. The light flashes.
2. Select the new programme (with temperature),
any additional options and - if you wish - another
spin speed.
3. Press the “Start” button again to restart the
programme.
If you are in the “Prewash” programme step, this
additional option cannot be deselected as
described (to do this see “Cancel (Reset) a
running programme before the end”).
Press the “Reset” button for at least 2 seconds.
Any existing water is drained out before the door
can be opened.
PROGRAMME START
“DOOR LOCKED” INDICATOR
“TROUBLE” INDICATORS
PROGRAMME END
RESELECT AFTER PROGRAMME START
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
4GB05165.fm Page 2 Thursday, May 20, 2004 6:05 PM
Black process 45.0° 100.0 LPI


Specyfikacje produktu

Marka: Bauknecht
Kategoria: pralka
Model: Excellence WA 1200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bauknecht Excellence WA 1200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje pralka Bauknecht

Instrukcje pralka

Najnowsze instrukcje dla pralka

Candy

Candy CS 15102D3-80 Instrukcja

15 Października 2024
GE

GE GSD3715FAA Instrukcja

15 Października 2024
Siemens

Siemens iQ700 WI14W540EU Instrukcja

15 Października 2024
LG

LG WTP22BK Instrukcja

15 Października 2024
Freggia

Freggia WTIE148 Instrukcja

15 Października 2024
Freggia

Freggia WISE126R Instrukcja

15 Października 2024
Freggia

Freggia WISE126B Instrukcja

15 Października 2024
Freggia

Freggia WISE126 Instrukcja

15 Października 2024
Freggia

Freggia WISA105 Instrukcja

15 Października 2024
Freggia

Freggia WISA106 Instrukcja

15 Października 2024