Instrukcja obsługi Barco R9004695

Barco Niesklasyfikowane R9004695

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Barco R9004695 (12 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
ImagePRO-II Jr
User’s Guide Addendum
• Manual #: 26-0904101-00
• Revision: 01
26-0904101-00 Rev 01.00 2
User’s Guide Addendum
Copyright
© Barco. June 12, 2012
All rights reserved. No part of this document may be copied, reproduced or translated. It
shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior
written consent of Barco.
Notice
Barco provides this manual “as is” without warranty of any kind, either expressed or
implied, including but not limited to the implied warranties or merchantability and fitness for
a particular purpose. Barco may make improvements and/or changes to the product(s) and/
or the program(s) described in this publication at any time without notice.
This publication could contain technical inaccuracies or typographical errors. Changes are
periodically made to the information in this publication; these changes are incorporated in
new editions of this publication.
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area may cause harmful interference, in which case the user will be responsible for
correcting any interference.
Guarantee and Compensation
Barco provides a guarantee relating to perfect manufacturing as part of the legally
stipulated terms of guarantee. On receipt, the purchaser must immediately inspect all
delivered goods for damage incurred during transport, as well as for material and
manufacturing faults Barco must be informed immediately in writing of any complaints.
The period of guarantee begins on the date of transfer of risks, in the case of special
systems and software on the date of commissioning, at latest 30 days after the transfer of
risks. In the event of justified notice of compliant, Barco can repair the fault or provide a
replacement at its own discretion within an appropriate period. If this measure proves to be
impossible or unsuccessful, the purchaser can demand a reduction in the purchase price or
cancellation of the contract. All other claims, in particular those relating to compensation for
direct or indirect damage, and also damage attributed to the operation of software as well
as to other services provided by Barco, being a component of the system or independent
service, will be deemed invalid provided the damage is not proven to be attributed to the
absence of properties guaranteed in writing or due to the intent or gross negligence on the
part of Barco.
If the purchaser or a third party carries out modifications or repairs on goods delivered by
Barco, or if the goods are handled incorrectly, in particular if the systems are commissioned
operated incorrectly or if, after the transfer of risks, the goods are subject to influences not
agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid.
26-0904101-00 Rev 01.00 3
Not included in the guarantee coverage are system failures which are attributed to
programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal
wear as well as normal maintenance are not subject to the guarantee provided by Barco
either.
The environmental conditions as well as the servicing and maintenance regulations
specified in this manual must be complied with by the customer.
Trademarks
Brand and product names mentioned in this manual may be trademarks, registered
trademarks or copyrights of their respective holders. All brand and product names
mentioned in this manual serve as comments or examples and are not to be understood as
advertising for the products or their manufactures.
Company Address
Barco, Inc.
3078 Prospect Park Drive
Rancho Cordova, California 95670
USA
•
Phone: (916) 859-2500
•
Fax: (916) 859-2515
•
Website: www.barco.com
Barco N.V.
Noordlaan 5
8520 Kuurne
BELGIUM
•
Phone: +32 56.36.82.11
•
Fax: +32 56.35.16.51
•
Website: www.barco.com
Technical Support (USA)
•
Customer Service Portal — www.barco.com/esupport
• Phone:
(866) 374-7878 —
— 6 a.m. to 10 p.m. (PST), 7 days per
week
Technical Support (Europe, Middle East, Asia)
•
Telephone: 0800900410
•
Online: www.barco.com/support/eSupport.asp

Specyfikacje produktu

Marka: Barco
Kategoria: Niesklasyfikowane
Model: R9004695

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Barco R9004695, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Barco

Barco

Barco SP4K-13HC Instrukcja

17 Września 2024
Barco

Barco XDL-4K30 Instrukcja

12 Września 2024
Barco

Barco F70-W8 Instrukcja

10 Września 2024
Barco

Barco FS70-4K4 Instrukcja

6 Września 2024
Barco

Barco R9004683 Instrukcja

6 Września 2024
Barco

Barco UDX-4K40 FLEX Instrukcja

6 Września 2024
Barco

Barco R9004787 Instrukcja

4 Września 2024
Barco

Barco FS70-W6 Instrukcja

3 Września 2024
Barco

Barco DustFilter F90 Instrukcja

31 Sierpnia 2024
Barco

Barco R9004677 Instrukcja

31 Sierpnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

GBC

GBC ThermaBind T500Pro Instrukcja

15 Stycznia 2025
Da-Lite

Da-Lite Parallax 29850 Instrukcja

15 Stycznia 2025
Crivit

Crivit IAN 290909 Instrukcja

15 Stycznia 2025
Tripp Lite

Tripp Lite SmartRack SRW12US Instrukcja

15 Stycznia 2025
Powerfix

Powerfix IAN 280221 Instrukcja

15 Stycznia 2025
AGM

AGM Rattler TC35-640 Instrukcja

15 Stycznia 2025
AGM

AGM Wolf-7 Pro Instrukcja

15 Stycznia 2025
AGM

AGM Anaconda TC50-640 Instrukcja

15 Stycznia 2025
AGM

AGM Secutor Pro TS50-640 Instrukcja

15 Stycznia 2025
Microchip

Microchip AT91SAM9M11 Instrukcja

15 Stycznia 2025