Instrukcja obsługi Barco G60-W8

Barco Beamer G60-W8

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Barco G60-W8 (74 stron) w kategorii Beamer. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/74
ENABLING BRIGHT OUTCOMES
User Guide
G60
Registered office: Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com
Barco NV
Beneluxpark 21, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com
Copyright ©
All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be
recorded, transmitted or stored in a retrieval system without the prior written consent of Barco.
Changes
Barco provides this manual 'as is' without warranty of any kind, either expressed or implied, including but not
limited to the implied warranties or merchantability and fitness for a particular purpose. Barco may make
improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time
without notice.
This publication could contain technical inaccuracies or typographical errors. Changes are periodically made
to the information in this publication; these changes are incorporated in new editions of this publication.
The latest edition of Barco manuals can be downloaded from the Barco web site www.barco.com or from the
secured Barco web site https://www.barco.com/en/signin.
Trademarks
Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights
of their respective holders. All brand and product names mentioned in this manual serve as comments or
examples and are not to be understood as advertising for the products or their manufacturers.
Trademarks
Crestron is a registered trademark of Crestron Electronics, Inc. of the United States.
Extron is a registered trademark of Extron Electronics, Inc. of the United States.
AMX is a registered trademark of AMX LLC of the United States.
PJLink applied for trademark and logo registration in Japan, the United States of America, and other
countries by JBMIA.
Guarantee and Compensation
Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of
guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage incurred during
transport, as well as for material and manufacturing faults Barco must be informed immediately in writing of
any complaints.
The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on
the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of
complaint, Barco can repair the fault or provide a replacement at its own discretion within an appropriate
period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a reduction in the
purchase price or cancellation of the contract. All other claims, in particular those relating to compensation for
direct or indirect damage, and also damage attributed to the operation of software as well as to other services
provided by Barco, being a component of the system or independent service, will be deemed invalid provided
the damage is not proven to be attributed to the absence of properties guaranteed in writing or due to the
intent or gross negligence or part of Barco.
If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the
goods are handled incorrectly, in particular if the systems are operated incorrectly or if, after the transfer of
risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the
purchaser will be rendered invalid. Not included in the guarantee coverage are system failures which are
attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear
as well as normal maintenance are not subject to the guarantee provided by Barco either.
The environmental conditions as well as the servicing and maintenance regulations specified in this manual
must be complied with by the customer.
Federal Communications Commission (FCC Statement)
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential

Specyfikacje produktu

Marka: Barco
Kategoria: Beamer
Model: G60-W8
Kolor produktu: Czarny
Wysokość produktu: 120.6 mm
Szerokość produktu: 184.1 mm
Głębokość produktu: 22.86 mm
Waga produktu: - g
W zestawie pilot zdalnego sterowania: Tak
Wbudowane głośniki: Nie
Długość przekątnej ekranu: 7 "
Zakres temperatur (eksploatacja): 0 - 60 °C
Rozdzielczość: 1440 x 234 px
Jasność: - cd/m²
Wbudowany tuner tv: Nie
System formatu sygnału analogowego: NTSC,PAL

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Barco G60-W8, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Beamer Barco

Barco

Barco Medea Instrukcja

18 Września 2024
Barco

Barco Loki Instrukcja

6 Września 2024
Barco

Barco CNHD-81B Instrukcja

31 Sierpnia 2024
Barco

Barco F80-Q12 Instrukcja

29 Sierpnia 2024
Barco

Barco G62-W11 Instrukcja

19 Sierpnia 2024
Barco

Barco PHWX-81B Instrukcja

18 Sierpnia 2024
Barco

Barco G60-W8 Instrukcja

13 Sierpnia 2024
Barco

Barco HDQ 2K40 Instrukcja

6 Sierpnia 2024

Instrukcje Beamer

Najnowsze instrukcje dla Beamer

Optoma

Optoma GT2000HDR Instrukcja

18 Września 2024
Panasonic

Panasonic PT-LB50SE Instrukcja

17 Września 2024
Hitachi

Hitachi CP-X250 Instrukcja

16 Września 2024
Hitachi

Hitachi MP-WU5603 Instrukcja

16 Września 2024
Hitachi

Hitachi CP-RX60Z Instrukcja

16 Września 2024
NEC

NEC GT6000R Instrukcja

16 Września 2024
Viewsonic

Viewsonic LS610WH Instrukcja

16 Września 2024
Epson

Epson DC-30 Instrukcja

16 Września 2024
Renkforce

Renkforce RF-PJ-300 Instrukcja

15 Września 2024