Instrukcja obsługi Baby Lock Quilters Choice Professional BLQP

Baby Lock maszyna do szycia Quilters Choice Professional BLQP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Baby Lock Quilters Choice Professional BLQP (51 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/51

“SAVE THESE INSTRUCTIONS”

“This sewing machine is intended for household use.”

DANGER – To reduce the risk of electric shock:

●The sewing machine should never be left unattended while plugged in. Always unplug the sewing machine from the electrical outlet immediately after using and before

cleaning.

●Always unplug before changing the light bulb. Replace bulb with same type rated 120V 15 watts for 120V model or rated 240V 15 watts for 220-240V model.

WARNING – To reduce the risk of burns, ﬁre, electric shock, or injury:

●Do not allow this sewing machine to be used as a toy. Close attention is necessary when the sewing machine is used by or near children.

●Use this sewing machine only for its intended use as described in this manual. Use only accessories recommended by the manufacturer as contained in this manual.

●Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the

sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment.

●Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing machine and foot control free from the accumulation of lint,

dust, and loose cloth.

●Never drop or insert any object into any opening.

●Do not use outdoors.

●Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

●To disconnect, turn the main switch to the symbol “O” position which represents oﬀ, then remove plug from outlet.

●Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

●Keep ﬁngers away from all moving parts. Special care is required around the sewing machine needle.

●Always use the proper needle plate. The wrong plate can cause the needle to break.

●Do not use bent needles.

●Do not pull or push fabric while stitching. It may deﬂect the needle causing it to break.

●Turn oﬀ power to the machine by ﬂipping the ON/OFF switch to the symbol “O” before making any adjustments in the needle area, such as threading the needle,

changing the needle, threading the bobbin or changing the presser foot etc.

●Always unplug the sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the

instruction manual.

●This sewing machine is not intended for use by young children or inﬁrm persons without supervision.

●Young children should be supervised to ensure that they do not play with this sewing machine.

CAUTION For U.S.A. only– This appliance has a polarized plug (one blade wider than the other) to reduce the risk of electric shock, this plug

is intended to ﬁt in a polarized outlet only one way.

If the plug does not ﬁt fully in the outlet, reverse the plug.

If it still does not ﬁt, contact a qualiﬁed electrician to install the proper outlet.

Do not modify the plug in any way.

“IMPORTANT SAFETY INSTRUCTIONS”

“Read all instructions before using.”

When using a sewing machine, basic safety precautions should always be taken,

including the following:

FOR USERS IN THE UK, EIRE, MALTA

AND CYPRUS ONLY

If your sewing machine is ﬁtted with a three-pin non-rewireable BS plug then please read the following.

IMPORTANT

If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut off and an appropriate three-pin plug ﬁtted. With alternative plugs an

approved fuse must be ﬁtted in the plug.

NOTE

The plug served from the main lead must be destroyed as a plug with bared ﬂexible cords is hazardous if engaged in a live socket outlet. In the event of replacing the plug

fuse, use a fuse approved by ASTA to BS 1362, i.e. carrying the mark, rating as marked on plug.

Always replace the fuse cover, never use plugs with the fuse cover omitted.

WARNING

DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER , BY THE EARTH SYMBOL OR COLOURED GREEN‘ ’E

OR GREEN AND YELLOW.

The wires in this main lead are coloured in accordance with the following code:

Blue Neutral

Brown Live

As the colours of the wiring in the main lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.

The wire which is coloured blue must be connected to the terminal which is marked with the letter ‘ ’N or coloured black or blue.

The wire which is coloured brown must be connected to the terminal which is marked with the letter ‘L’ or coloured red or brown.