Instrukcja obsługi B-tech BT8026

B-tech Wsparcie dla płaskich paneli BT8026

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla B-tech BT8026 (4 stron) w kategorii Wsparcie dla płaskich paneli. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

www.btechavmounts.com

SINGAPORE

B-Tech AV Mounts PTE Ltd

Ruby Industrial Complex,

Singapore 347740

Tel: (+65) 68412988 Fax: (+65) 6491 5613

Email: info@btechavmounts.com.sg

EUROPE

B-Tech PRO-AV bvba

Brixtonlaan 32, Zaventem 1930,

Brussels, Belgium.

Tel: +32 (0)2 720 92 71 Fax: +32 (0)2 725 42 15

Email: info@btechproav.com

NORTH AMERICA

B-Tech Audio Video Mounts

203 Eggert Road,

Buffalo, NY 14215, USA.

Tel: (1)800 975 5812 Fax: (1)800 592 2876

Email: info@btechavmounts.com

HEAD OFFICE

B-Tech International Ltd.

Bennett House, Long March,

Daventry, Northants, NN11 4NR, UK.

Tel: +44 (0)1327 300 787 Fax: +44 (0)1327 706 562

Email: info@btechavmounts.co.uk

PAGE 1 / 4

ASIA PACIFIC

B-Tech International (Hong Kong) Ltd.

1503 Prosperity Millennia Plaza, 663 King's Road,

Quarry Bay, Hong Kong.

Tel: (+852) 2556 7337 Fax: (+852) 2556 7321

Email: info@btechavmounts.com.hk

©2010 Bennett Technologies Limited. All rights reserved.B-Tech Audio Video Mounts is a division of Bennett Technologies Limited. B-Tech, Better By Design & Mountlogic are registered trademarks of Bennett Technologies Limited.

All other brands and product names are trademarks of their respective owners. Photographs are for illustrative purposes only. E&OE.

MADE IN CHINA

This Pack Contains 1 Flat Screen Mounting Plate & 2 50mm Collars With Covers

• Suitable for use with vertical or horizontal 50mm (2”) poles

• Suitable for back-to-back screen installations

• Mounts screen in landscape or portrait style

• 2 heavy duty collars with covers included

• Compatible with BTX24V and BTX24H

• Attaches to mounts with 150 x 150mm fixing patterns

• Security Allen key and screws provided

• Supplied with safety bolt for secure installation

• Simple hook-on installation with all mounting hardware included

• Must be used with ﬂat screen interface kit (BT7507 / BT8600 / BT8500 / BT8501)

Registered Design No: 4010378

IP-BT8026-V1-PROBX-220710-01

360

280

87,8

CAUTION: This mount is intended for use only with the maximum weights

indicated. Use with flat screens heavier than the maximum indicated may

result in instability causing possible injury.

Do not attempt to install this product until all instructions and warnings have been read and

properly understood. Please keep these instructions for future reference.

B-Tech International Limited, its distributors and dealers are not liable or responsible for

damage or injury caused by improper installation, improper use or failure to observe these

safety instructions. In such cases, all guarantees will expire.

General

B-Tech International Ltd recommends that a professional AV installer or other suitably qualified

person install this product. Great care must always be taken during installation as most AV

equipment is of a fragile nature, possibly heavy and easily damaged if dropped.

If you do not fully understand the instructions or are not sure how to install this product safely,

then please consult a professional for advice and/or to install this product for you. Failure to

mount this product correctly may cause serious injury or death both during installation and at

any time thereafter.

Do not mount any AV equipment that exceeds the specific weight limit of the product you are

installing. This weight limit will be clearly stated on each product and its packaging and will

vary from product to product.

Product location

Please pay careful attention to where this product is located. Some ceilings, walls and floors

are not suitable for installation.

If located in a public or frequently populated area ensure that the product is out of the

immediate reach of people. If any AV equipment is to be suspended over the likely path or

location of people then great care should be taken to secure all parts of the installation from

falling.

If you install this product on drywall it must be securely fixed to a wooden stud, concrete block

or other permanent structure behind the drywall board. Installing on drywall boards alone will

not support the weight of most AV equipment.

When drilling holes in ceilings, walls and floors it is essential to avoid contact with electrical

cables and water or gas pipes contained within. Use of a good quality live wire detector and

hidden object locator is therefore recommended. Only drill into structures when you are sure it

is safe to do so.

Fixing hardware

It is highly recommended that all ceiling, wall and floor fixing screws be used where supplied

and that the purpose of all other fixing hardware is fully understood. In some cases more AV

equipment fixing hardware will be supplied to accommodate different models of equipment and

set up configurations.

The installer must be satisfied that any supplied fixing hardware is suitable for each specific

installation. If any fixing screws or included hardware are deemed not sufficient for a safe

installation then please consult a professional or your local hardware store.

Hazard limitation

When routing cables take advantage of any built in cable management features that the

product might provide and ensure that all cables are tidy and secure. Check to see that any

moving aspect of the product can do so unhindered by any cabling.

Some products have moving parts and the potential to cause injury through the crushing or

trapping of fingers or other body parts.

Particular attention to the nature of moving parts is required especially when assembling

installing and adjusting during set up.

Immediately after installations double-check that the work done is safe and secure. Double-

check all necessary fixings are present and are of ample tightness.

It is recommended that periodic inspections of the product and its fixing points are made as

frequently as possible to ensure that safety is maintained. If in doubt consult a professional AV

installer or other suitably qualified person.

No PART NAME QTY

1 MOUNTING PLATE (BT8009) 1

2 BT7051 COLLAR 2

3 M8 X 15mm GRUB SCREW 8

4 M8 X 12mm FLAT HEAD CROSS SCREW 16

5 M5 X 12mm PIN HEX SCREW 4

6 M6 METAL WASHER

(FOR PART 5) 4

7 M8 SPRING WASHER

(FOR PART 4 & 9) 17

8 BT7051 COLLAR COVER 4

9 M8 X 65mm HEX SAFETY BOLT 1

10 4mm PIN HEX KEY (LONG)

(FOR PARTS 3 & 5) 1

11 5mm HEX KEY

(FOR PART 9) 1

PAGE 2 / 4

Suitable for loads up to 70kg (154lbs)

Spare screws and

washers are provided

for use on the other

side of the collar if

two accessories need

to be attached.

Covers cannot be

used in this situation.

IP-BT8026-V1-PROBX-220710-01

PAGE 3 / 4

1. Attach collars to the mounting plate

Fasten both 50mm accessory collars (Part 2) to the

mounting plate (Part 1) by using the M8 cross screws

(Part 4) with the spring washers (Part 7).

Slide the collars

(Part 2) onto the

pole, until the

desired height is

achieved.

2. Fix mount to the pole

3. Fix the interface kit (sold separately)

to the flat screen

Mount a B-Tech interface kit to the flat screen. See

interface kit manual for screen fixing instructions.

Suitable interface kits are BT7507, BT8600, BT8500

& BT8501.

5. Attach collar covers4. Hook the flat screen

onto the mounting plate Fit the collar covers (Part 8) onto the 2 collars

for a neat and tidy finish.

Hook the interface (with flat

screen attached) onto the

mounting plate (Part 1), then

secure by using the 4mm hex

key (Part 10) to tighten the 4

pin hex screws (Part 5) with

washers (Part 6) at the top

and bottom of the interface

plate.

BT8500

interface

(example)

Fit the safety bolt

(Part 9) with spring

washer (Part 7)

through the bottom

collar and pole, then

fasten grub screws

(Part 3) to fix the

position.

Tools Required For Installation:

- Crosshead Screwdriver

Flat

screen

50mm (2")

pole sold

separately

IP-BT8026-V1-PROBX-220710-01

Specyfikacje produktu

Marka:	B-tech
Kategoria:	Wsparcie dla płaskich paneli
Model:	BT8026

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z B-tech BT8026, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Wsparcie dla płaskich paneli B-tech

B-tech BT9340-FM Instrukcja

15 Stycznia 2025

B-tech BTV520 Instrukcja

4 Stycznia 2025

B-tech BTV511 Instrukcja

4 Stycznia 2025

B-tech BT9920 Instrukcja

9 Października 2024

B-tech BT4001 Instrukcja

28 Września 2024

B-tech BT5890-150 Instrukcja

28 Września 2024

B-tech BT4003 Instrukcja

28 Września 2024

B-tech BT7333 Instrukcja

28 Września 2024

B-tech BT7553-100 Instrukcja

28 Września 2024

B-tech BT5811-075 Instrukcja

28 Września 2024

Instrukcje Wsparcie dla płaskich paneli

Najnowsze instrukcje dla Wsparcie dla płaskich paneli

StarTech.com ARMPIVOTE2 Instrukcja

15 Stycznia 2025

StarTech.com 3M1A3SG-MONITOR-ARM Instrukcja

15 Stycznia 2025

Vogel's FM1622 Instrukcja

15 Stycznia 2025

NeoMounts DS45-430BL16 Instrukcja

14 Stycznia 2025

NeoMounts DS42-430BL14 Instrukcja

14 Stycznia 2025

NeoMounts NS-WMB300PBLACK Instrukcja

14 Stycznia 2025

StarTech.com MONSTADJD Instrukcja

14 Stycznia 2025

Manhattan 424868 Instrukcja

14 Stycznia 2025

Manhattan 424820 Instrukcja

14 Stycznia 2025

StarTech.com ARMDUOSS Instrukcja

14 Stycznia 2025