Instrukcja obsługi Axis Q1656-BLE

Axis Bewakingscamera Q1656-BLE

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Axis Q1656-BLE (10 stron) w kategorii Bewakingscamera. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/10
AXIS Q1656-LE Box Camera
Repainting Instructions
AXIS Q1656-LE Box Camera
Impact on warranty
Impact on warranty
This product is approved for repaint by Axis, provided that you follow the instructions in this document and at
axis.com/warranty-implication-when-repainting.
Risks with repainting
There are several risks when disassembling or assembling an Axis product. There is always a certain yield loss during assembly. Training
of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include:
ESD Damage - Always handle the product in an ESD safe environment. Even if precautions are taken there is always a risk of ESD
damage. The damage can remain undetected and cause problems during the lifetime of the equipment.
Dust contamination - Opening a camera may expose the lens and sensor to dust or paint. Dust will affect the optical performance.
Lenses need to be disassembled in a dust-free environment, preferably a cleanroom.
Paint overspray - Masking the different components of the equipment is critical. Failure to mask sensitive areas can cause problems
with assembling the equipment. Any areas that are not painted at factory or have a different surface treatment than the rest of the
parts (threads, ground and electrical contact surfaces) must also be masked to ensure function.
2
AXIS Q1656-LE Box Camera
Repaint the product
Repaint the product
Preparations
If applicable, disassemble the device according to the instructions in this document.
Clean all parts to be repainted thoroughly to remove grease, dust, or oil.
To ensure reassembly and functionality of the product, mask any openings (for example for screws, LED indicators,
or microphones) before you paint.
Pretreatment of parts
Depending on the part material and type of paint applied at factory, different pretreatment should be done for the new paint to
adhere as well as possible. Clean the parts properly to remove oil, grease and dust.
For more information on the materials used in the product, see its datasheet at .axis.com
Powder coated parts - Use a primer. Alternatively, remove the original powder coating down to the base material, using ne
sandpaper, and clean the parts before painting.
Anodised and chromated parts - Use a primer.
Uncoated stainless steel - No special pretreatment is needed, but make sure that the surface is clean before painting.
Plastic - Use a primer.
Materials used in this product
The weathershield is plastic.
The rest of the product is powder coated.
Disassembly
Disassemble the housing
1. Remove the screws and the top cover from the bottom chassis.
3

Specyfikacje produktu

Marka: Axis
Kategoria: Bewakingscamera
Model: Q1656-BLE

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Axis Q1656-BLE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Bewakingscamera Axis

Axis

Axis ExCam XF P1367 Instrukcja

21 Września 2024
Axis

Axis 209MFD Instrukcja

21 Września 2024
Axis

Axis P3225-VE Mk II Instrukcja

21 Września 2024
Axis

Axis Q6054-E MK II Instrukcja

21 Września 2024
Axis

Axis Q6155-E 50Hz Instrukcja

21 Września 2024
Axis

Axis T94S01L Instrukcja

21 Września 2024
Axis

Axis Q1656-BLE Instrukcja

21 Września 2024
Axis

Axis Q8632-E Instrukcja

20 Września 2024
Axis

Axis P1354-E Instrukcja

20 Września 2024
Axis

Axis M2026-LE Mk II Instrukcja

20 Września 2024

Instrukcje Bewakingscamera

Najnowsze instrukcje dla Bewakingscamera