Instrukcja obsługi AXESS AXDSPL-CH8

AXESS Niesklasyfikowane AXDSPL-CH8

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AXESS AXDSPL-CH8 (16 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

AXDSPL-CH8

I N S T A L L A T I O N I N S T R U C T I O N S

INTERFACE FEATURES

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip-ties • Multimeter

TABLE OF CONTENTS

Installation & Installation Options ........................2

Connections 3-4 ........................................................

Rebooting the U-Connect Radio 5 ..........................

Mobile App: Quick Setup 6-7 ...................................

Specifications 8 .........................................................

• Includes a DSP (Digital Signal Processor)

• Selectable 15 Band graphic EQ or 5 Band Parametric EQ

• 4 inputs and 6 individually assignable outputs

• Independent equalization for front, rear, and sub

• Selectable low pass, band pass, and high pass filters

• Selectable crossover slopes; 12db, 24db, 36db, 48db

• Each channel can be delayed independently up to 10ms

• Clipping detection and limiting circuits

• Designed for non-amplified modelsboth amplified and

• Easy behind the radio installation with pre-wired harness

(Features continued on next page)

APPLICATIONS

Visit for current application list

AxxessInterfaces.com

INTERFACE COMPONENTS

• AXDSPL-CH8 interface

• AXDSPL-CH8 interface harness

• AXDSPL-CH8 vehicle T-harness

• Bass knob

Chrysler DSP Interface (with Pre-Wired Harness)

2020-Up

www.MetraOnline.com

MetraOnline.com may be used to assist

with dash assembly instructions. Simply

enter your Year, Make, Model vehicle

into the vehicle fit guide and look for the

Dash Kit Installation Instructions.

Google Play Store Apple App Store

iOS 12.1 or higher

ATTENTION: With the key out of the ignition, disconnect

the negative battery terminal before installing this

product. Ensure that all installation connections,

especially the air bag indicator lights, are plugged in

before reconnecting the battery or cycling the ignition

to test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

INSTALLATION OPTIONS INSTALLATION

FEATURES CO NT.

• Internal header port for adding interface modules

• Bass knob included for level control of subwoofer amp

• Settings adjusted via Bluetooth® in a smart device application (tablet

or mobile phone), compatible with both Android and Apple devices

• Read, write, and store configurations for future recall

• Password protect feature available in the mobile app

• USB Micro-B updatable

1. Disassemble the dash, unplug all connectors, and then remove the factory radio.*

2. AXDSPL-CH8 vehicle T-harness Install the to the vehicle and make all necessary

connections, but leave the amp turn-on wire disconnected.

Note: If installing a full range amp on the front and rear speakers, the resistor pad

harness must be used to present a load to the factory radio. Two are provided with

different value resistors. Use whichever one works and discard the other.

3. AXDSPL-CH8 vehicle T-harness AXDSPL-CH8 interfacePlug the to the .

4. AXDSPL-CH8 interface harness AXDSPL-CH8 interfacePlug the to the .

Download and install the from the or .AX-DSP-X app Google Play Store Apple App Store

6. Cycle the ignition on.

7. Bluetooth Open the app then select the ® Connection tab. Follow the instructions to

pair the mobile device to the interface. Refer to for more information.Page 6

8. Configuration Lock Down Scroll to the tab then select the vehicle type. Press the **

button to save the configuration. Refer to for more information.Page 7

9. Connect the amp turn-on wire.

10. Lock Down Adjust the settings in the app as desired. Press the ** button to save any

new configurations,

*For dash disassembly instructions, refer to . Enter the year, make, and model metraonline.com

of the vehicle in the Vehicle Fit Guide and find instructions under Metra Radio Install kits.

**Anytime the interface is locked down the key must be cycled off then back on.

Adding a subwoofer to a factory system:

This feature offers the ability to add a subwoofer to a factory system, whether amplified or non-

amplified. (Refer to )Page 3

Adding a full-range amp & subwoofer to a factory system: This feature offers the ability to add a full-

range amp and sub to a factory system, whether amplified*

or non-amplified. (Refer to )Page 4

* For amplified models the amp must be bypassed/unplugged, and chosen in With OE Amplifier

the tab under . Use either Axxess or (sold Configuration Vehicle Type AXABH-CH2 AXABH-CH4

separately) to bypass the amp for best results.

16-pin header port: Inside the interface is a 16-pin header port for adding optional modules

(sold separately).

• - BluetoothAXDSPL-BT ® streaming interface

• - Toslink digital outputAXDSPL-SP

Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing

multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps

combined exceeds 1-amp. Use Metra part number (sold separately) for best results.E-123

REV. 7/24/24 INSTAXDSPL-CH8

ADDING A SUBWOOFER TO A FACTORY SYSTEM

Factory Radio

These outputs can be used for

additional sub amps, or for adding

onto the em at a later datesyst

RCA Jacks

(sold separately)

K deep Connecte

Any remaining wires

tape off and disregard

Black - Ground

Orange - Control

Bass Knob

Factory Radio Harness

Interface

Any remaining wires

tape off and disregard

Vehicle T-Harness

Blue/White - Amp Turn-On Wire

Interface Harness

Specyfikacje produktu

Marka:	AXESS
Kategoria:	Niesklasyfikowane
Model:	AXDSPL-CH8

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AXESS AXDSPL-CH8, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane AXESS

AXESS AXBUCS-MZ286V Instrukcja

9 Października 2024

AXESS 99-7014HG Instrukcja

8 Października 2024

AXESS AXGM-17 Instrukcja

8 Października 2024

AXESS AXGMLN-34 Instrukcja

8 Października 2024

AXESS 99-7382HG Instrukcja

8 Października 2024

AXESS GMOS-12 Instrukcja

8 Października 2024

AXESS XSVI-1788-NAV Instrukcja

8 Października 2024

AXESS 99-7510HG Instrukcja

8 Października 2024

AXESS AXBUCS-NI246V Instrukcja

8 Października 2024

AXESS 99-3307G Instrukcja

8 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024