Instrukcja obsługi AXESS AXDI-6524

AXESS Niesklasyfikowane AXDI-6524

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AXESS AXDI-6524 (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

AXDI-6524

I N S TA L L AT I O N I N S T R U C T I O N S

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties

TABLE OF CONTENTS

Connections 2-3 ........................................................

Installation 3 .............................................................

Programming 3 .........................................................

App Instructions 4-5 .................................................

Jeep/Ram Select Models Data Interface 2014-Up

• Designed for non-amplified systems

• Provides accessory power (12-volt 10-amp)

• Retains R.A. (Retained Accessory Power)P.

•

Provides wires for multimedia radios (park brake, reverse, speed sense)

• Pre-wired AXSWC harness (AXSWC sold separately)

•

Retains the factory backup camera (Not retained on Wrangler JL

or Gladiator)

• Retains balance and fade

• Retains the factory AUX-IN jack

• Allows retention and adjustment of the Personalization Options

• Adjust Personalization Options through a wireless application

• Smartphone application offering full control from either Android

or Apple mobile devices

• Micro-B USB updatable

• AXDI-6524 interface

• LD-AX-XSVI-CH3BT Harness

• 2-pin CAN harness

OPTIONAL ACCESSORIES

(sold separately)

Steering Wheel Control Interface:

AXSWC OBD T-Harness: AX-IL-OBD2

APPLICATIONS

Jeep

Gladiator* 2020-Up ....................................................................................

Renegade 2015-2017 ..................................................................................

Renegade Sport 2018 .................................................................................

Wrangler* JL (Base model) 2018-Up .........................................................

Ram

Promaster (w/color screen) 2014-Up .......................................................

Promaster City 2015-Up .............................................................................

* Factory Backup Camera will not be retained on Wrangler JL or Gladiator

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal

before installing this product. Ensure that all

installation connections, especially the air

bag indicator lights, are plugged in before

reconnecting the battery or cycling the

ignition to test this product.

NOTE: Refer also to the instructions included

with the aftermarket accessory before

installing this device.

Visit for more detailed information about AxxessInterfaces.com

the product and up-to-date vehicle specific applications

CONNECTIONS: LD-AX-XSVI-CH3BT DIAGRAM

Steering Wheel

Control (AXSWC)

(Sold Separately)

Refer to

page 3

for 2-Pin

Connection

Front

Rear

Sub

AUX-IN

Rear ewVi

SWC

Aftermarket Radio

(Your radio’s features may vary)

LD-AX-XSVI-CH3BT

Black - Ground wire

Yellow - Battery wire

Red - Accessory power

Green - Rear left speaker + output

Green/Black - Rear left - speaker output

Green/Purple

- Reverse backup camera

Light Green - Parking brake

Orange - Illumination

Blue/White NOT USED-

Blue/Pink - VSS/Speed-Sense

Gray - Front right + speaker

Gray/Black - Front right - speaker

White - Front left + speaker

White/Black - Front left - speaker

Purple - Rear right + speaker output

Purple/Black - Rear right - output

16-Pin

Vehicle Connector

Radio Connections

Interface

12-Pin

2-Pin

REV. 5/16/24 INSTAXDI-6524

CAN connections to the vehicle: (

See page 2 for Diagram)

• Disconnect the from the .2-pin connector AXDI-6524 harness

• Connect the

2-pin CAN harness AXDI-6524 harness to the .

• Route the harness to the vehicles OBD port located under the driver’s side dash.

Option 1 (excluding Wrangler)

• Connect the wire to the CAN-HI wire. (Figure A)White/Red

• Connect the wire to the CAN-LO wire. (Figure A)White/Green

With the key in the off position:

1. AXDI-6524 harness AXDI-6524 interface Connect the to the , and then to the wiring

harness in the vehicle.

2. AXSWC AXDI-6524 If an (sold separately) will be used, do not connect it until the is

programmed and fully functional.

CONNECTIONS (CONT.) INSTALLATION

(Figure A)

Attention!

If the interface ever loses power, the following steps will need to be performed

again. Please ensure that the owner of the vehicle knows this.

1. Turn the key (or push-to-start button) to the ignition position and wait until the radio

comes on.

Note: If the radio doesn’t not come on within 60 seconds, turn the key to the off

position, disconnect the interface, check all connections, reconnect the interface, and

then try again.

2. Turn the key (or push-to-start button) to the off position, then open and close the

driver’s door.

3. Wait 5 minutes for the vehicle to fully go to sleep.

4. Start the vehicle, then test all functions of the installation for proper operation.

PROGRAMMING

12-pin pre-wired AXSWC harness:

This harness is to be used along with the (sold separately) to retain steering wheel audio AXSWC

controls. If the is not being used, disregard this harness. If it is to be used, please refer to the AXSWC

AXSWC instructions for radio connections and programming. Disregard the harness that comes with

the .AXSWC

Specyfikacje produktu

Marka:	AXESS
Kategoria:	Niesklasyfikowane
Model:	AXDI-6524

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AXESS AXDI-6524, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane AXESS

AXESS AXBUCS-MZ286V Instrukcja

9 Października 2024

AXESS 99-7014HG Instrukcja

8 Października 2024

AXESS AXGM-17 Instrukcja

8 Października 2024

AXESS AXGMLN-34 Instrukcja

8 Października 2024

AXESS 99-7382HG Instrukcja

8 Października 2024

AXESS GMOS-12 Instrukcja

8 Października 2024

AXESS XSVI-1788-NAV Instrukcja

8 Października 2024

AXESS 99-7510HG Instrukcja

8 Października 2024

AXESS AXBUCS-NI246V Instrukcja

8 Października 2024

AXESS 99-3307G Instrukcja

8 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024