Instrukcja obsługi AudioControl LC-1.1500

AudioControl odbiornik LC-1.1500

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AudioControl LC-1.1500 (12 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
HIGH-POWER SUBWOOFER AMPLIFIER
Quick Start Guide
Features
• High Power Mono Subwoofer Amplier
• High Current Design
• 800 Watts @ 2 Ohm
• MILC™ Maximum Input Level Control (Patent Pending)
• 24 dB/Octave Linkwitz-Riley Alignment Crossover
• GTO Signal Sense
• PFM Subsonic Filter
• Line-Level RCA Inputs and Active Speaker-Level Inputs
• Solid One-Piece Aluminum Chassis
• Optional wired ACR-1 Remote Control for Subwoofer Level
• AccuBASS® Bass Restoration
• Filled with home-grown audio goodness
2
Quick Start Guide
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as muers, silencers, exhaust
pipes, or other apparatus (including ampliers) that produce heat.
9. WARNING: Improper installation may lead to permanent injury or death.
Installation of the apparatus must be done with great care by qualied
personnel, to prevent damage to fuel lines, power and other electrical
wiring, hydraulic brake lines, and other systems, that might compromise
vehicle safety.
10. Provide +12V and Ground wiring of sucient size to ensure adequate
current to the amplier. For the LC-1.800 this means 4 gauge wire or
lower.
11. Use rubber grommets to protect wiring whenever passing wires through
metal openings or bulkheads.
12. Only use attachments/accessories specied by the manufacturer.
13. Refer all servicing to qualied service personnel. Servicing is required
when the apparatus has been damaged in any way, such as the power in-
put terminals are damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
14. This apparatus shall not be exposed to dripping or splashing, and no
object lled with liquids, shall be placed on the apparatus.
15. Fuses shall be replaced only with the correct type and fuse value, and
only when the apparatus is powered o.
16. Exposure to high sound pressure levels may lead to permanent hearing
loss. Take every precaution to protect your hearing.
The lightning ash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure, that may be of
sucient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user of the presence of important operating and mainte-
nance (servicing) instructions in the literature accompanying the
appliance.
Caution: to reduce the risk of electric shock, do
not disassemble the apparatus, other than to
remove the top panel to access the controls.
There are no user-serviceable parts inside. Refer
servicing to qualied personnel.
Recycling notice: If the time comes and this apparatus has fullled
its destiny, do not throw it out into the trash. It has to be carefully
recycled for the good of mankind, by a facility specially equipped
for the safe recycling of electronic apparatii. Please contact your
local or state recycling leaders for assistance in locating a suitable
nearby recycling facility. Or, contact us and we might be able to
repair it for you.
3
1. Fuses 40A – Replace the fuses only with the exact same style
and Ampere rating. Disconnect 12V power before changing or
inspecting the fuses.
2. Power Input Terminal +12V – This screw terminal connects to
the +12V battery binding post of the vehicle. Use quality insulated
wiring of the recommended wire gauge, such as wire gauge 4 or
thicker. Thinner wire may cause an overheating hazard due to the
large currents involved.
3. Remote Power Input Terminal – This screw terminal connects
to the 12V remote trigger output of some head units. When the
head unit is turned on, then the LC-1.800 amplier will turn on.
Alternatively, you can use the GTO feature of the amplier so it
will turn on when an audio signal is detected at the speaker-level
or line-level inputs.
4. Power Input Terminal Ground – This screw terminal connects to
a good ground connection on the vehicle.
5. Speaker-Level Inputs – The LC-1.800 amplier is supplied with
a standard 4-conductor plug that allows for easy installation and
removal. The speaker-level output from ampliers and factory
installed radios can connect here, so the LC-1.800 will receive the
audio signals and do its subwoofer thing. The left and right audio
signals are summed internally to produce a mono subwoofer sig-
nal. Make sure that you follow the plus and minus polarity mark-
ings on the LC-1.800 and match it to the polarity of the speaker
wiring. Do not use the RCA Line-level inputs if you are using the
speaker-level inputs.
Connection Panel Features
1 2 3 4 5 6 7 8

Specyfikacje produktu

Marka: AudioControl
Kategoria: odbiornik
Model: LC-1.1500

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AudioControl LC-1.1500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik AudioControl

AudioControl

AudioControl A800.1 Instrukcja

8 Października 2024
AudioControl

AudioControl A600.4 Instrukcja

8 Października 2024
AudioControl

AudioControl A1100.5 Instrukcja

8 Października 2024
AudioControl

AudioControl A1500.1 Instrukcja

8 Października 2024
AudioControl

AudioControl CM4-750 Instrukcja

5 Października 2024
AudioControl

AudioControl CM3-750 Instrukcja

5 Października 2024
AudioControl

AudioControl ACX-300.2 Instrukcja

30 Września 2024
AudioControl

AudioControl Rialto 600 Instrukcja

20 Września 2024
AudioControl

AudioControl D-6.1200 Instrukcja

20 Września 2024
AudioControl

AudioControl LC-6.1200 Instrukcja

19 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024